NZXT N7 Z590 ATX Motherboard Instructions

Instructions N7 Z590
ATX MOTHERBOARD

PREFACE

A. Copyright© NZXT, Inc. All Rights Reserved.
This manual including all illustrations and screen captures, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author.

B. Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and  specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to  make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes.

C. Trademark Recognition
Product names used in this manual are the properties of their respective owners and are acknowledged.

D. Safety Precaution
Follow these safety precautions when installing the motherboard:

• It is recommended to wear a grounding strap attached to a grounded device to avoid damage from static electricity.
• Discharge static electricity by touching the metal case of a safely grounded object before working on the motherboard.
• Leave components in the static-proof bags.
• Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components.

PRODUCT INFORMATION

SPECIFICATIONS
CPU & Socket
LGA socket 1200 for Intel® 11th Generation Core™ i9/ Core™ i7/ Core™ i5 Processors

• Support Intel 14nm CPU
• Support Intel Turbo Boost Technology 2.0

Chipset
Intel® Z590

Memory
4 x DIMM, Max. 128GB, DDR4

• 4600(O.C.)/ 4400(O.C.)/ 4266(O.C.)/ 4133 (O.C.)/ 4000(O.C.)/ 3866(O.C.)/ 3733(O.C.)/ 3600(O.C.)/ 3466(O.C.)/ 3400(O.C.)/ 3333(O.C.)/ 3300(O.C.)/ 3200(O.C.)/  3000(O.C.)/ 2800(O.C.)/ 2666(O.C.)/ 2400(O.C.)/ 2933/ 2800/ 2666/ 2400/ 2133 MHz Non-ECC, Un-buffered Memory*
• Dual-channel memory architecture
• Support Intel® Extreme Memory Profile (XMP) 2.0
• Please refer to Memory QVL on NZXT’s website (www.nzxt.com) for more information.

Expansion Slots
Intel® 11th Gen Core™ i9/i7/i5 CPUs

• 2 x PCIe x16 Slots (PCIe1: 4.0 x16 mode; PCIe3: 3.0 x4 mode)
  Intel® 10th Gen Core™ i9/i7/i5/i3 CPUs

• 2 x PCIe x16 Slots (PCIe1: 3.0 x16 mode; PCIe3: 3.0 x4 mode) 3 x PCIe 3.0 x1 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module, CNVio

Integrated Graphics
Integrated Graphics Processor- Intel® UHD Graphics Support
Single-graphic output support: HDMI port

• HDMI™ with max. resolution of 4096×2160@30Hz

Multi-GPU Support
Supports AMD 2-Way CrossFireX™ Technology

Storage
Intel® Z590 Chipset

• 1 x M.2 type 2242/2260/2280 (PCIe 4.0 x4 mode, PCIe 3.0 x4 mode with Comet Lake CPU)
• 1 x M.2 type 2242/2260/2280 (PCIe 3.0 x4 & SATA mode)
• 4 x SATA 6Gb/s ports

Support RAID 0/1/5/10
Supports Intel® Smart Response Technology
Intel® Rapid Storage Technology 18
Intel® Optane Memory Ready

LAN
Realtek® RTL8125BG 2.5G LAN

Wireless
Intel Dual Band Wireless-AX210 Wi-Fi 6E

• Wi-Fi 802.11 a/b/g/n/ac/ax
• Support dual band frequency 2.4/5GHz/6GHz
• Support MU-MIMO

Bluetooth
Bluetooth V5.2
Audio
Realtek® ALC1220 Codec
8-Channel High Definition Audio, 32-bit /192KHz DAC
Nichicon Fine Gold Series Audio Capacitors

USB Ports

• 3 x USB 3.2 Gen 2 ports (3 at back panel [light blue])
• 1 x USB 3.2 Gen 2×2 Type-C (at back panel)
• 1 x USB 3.2 Gen 2 front panel port (For USB Type-C)
• 8 x USB 3.2 Gen 1 ports (4 at back panel [blue], 4 at mid-board)
• 8 x USB 2.0 ports (2 at back panel, 6 at mid-board)

Rear I/O

• 3 x USB 3.2 Gen 2 port
• 1 x USB 3.2 Gen 2×2 Type-C port
• 4 x USB 3.2 Gen 1 ports
• 2 x USB 2.0
• 1 x HDMI™ 1.4b
• 1 x 2×2 Wireless antenna
• 1 x Clear CMOS button
• 1 x LAN (RJ45) port
• 1 x Optical S/PDIF Out port
• 1 x 5.1-Channel audio jacks

Internal I/O

• 1 x 24-pin ATX power connector
• 1 x 8+4-pin ATX 12V power connector
• 1 x 4-pin CPU_FAN connector(1)
• 1 x 4-pin AIO_PUMP connector(2)
• 5 x 4-pin SYS_FAN connectors(2)
• 2 x NZXT RGB LED connectors(3)
• 1 x 5V ARGB LED connector(4)
• 1 x 12V RGB LED connector(5)
• 3 x USB 2.0 header (Up to 6 USB 2.0 ports)
• 2 x USB 3.2 Gen1 header (Up to 4 USB 3.2 Gen 1 ports)
• 1 x USB 3.2 Gen2 front panel header (For USB Type-C)
• 4 x SATA 6Gb/s connectors
• 1 x M.2 Socket 3 with M Key, type 2242/2260/2280 storage device support (PCIe 4.0 x4 mode, PCIe 3.0 x4 mode with Comet Lake CPU)
• 1 x M.2 Socket 3 with M Key, type 2242/2260/2280 storage device support (PCIe 3.0 x4 & SATA mode)
• 1 x M.2 Socket 1 with E Key, (For wireless cards, supports CNVio)
• 1 x Front panel audio connector
• 1 x Power button
• 1 x Reset button
• 4 x POST LEDs

1. CPU_Fan connector supports 3-pin and 4-pin fans with maximum 2A (24W) fan power.
2. AIO_PUMP and all SYS_FAN connectors support maximum 2A (24W) per fan header and auto detects if a 3-pin or 4-pin fan is connected.
3. Supports up to 40 individually addressable LEDs per channel. 80 LEDs total. Lighting channels support up to six addressable RGB LED Strips or five Aer RGB Fans.
4. Supports in total up to 5V/3A, 15W LED Strip. Supports up to 40 individually addressable LEDs.
5. Supports in total up to 12V/3A, 36W LED Strip

Operating System
Microsoft® Windows® 10 (64-bit)
Form Factor ATX
Certifications
FCC, CE, KCC, BSMI, ErP/EuP Ready

COVERS

The all-metal N7 cover pieces can be removed by hand. They are latched onto the motherboard through multiple points. When installing and removing, please pay close  attention to these points and apply an even force to prevent damage.

EXPLODED VIEW

PORTS OVERVIEW

devices  (Supports PCIE & SATA mode)
21| PCIEX1_3| PCI Express x1 Gen3 slot
22| PCIEX1_2| PCI Express x1 Gen3 slot
23| PCIEX16_2| PCI Express x16 Gen3 slot for GPU
24| Battery| CMOS Battery
25| M2_3| M.2 Socket 1 with E key, supports type 2230 wireless devices with CNVio
26| PCIEX16_1| PCI Express x16 Gen3 slot for GPU
27| PCIEX1_3| PCI Express x1 Gen3 slot
28| M2_1| M.2 Socket 3 with M key, supports type 2242/2260/2280 storage devices (Supports PCIE)
29| ATX_12V| 8+4-pin +12V power connector
30| CPU_FAN| 4-pin CPU fan connector

3.4 REAR I/O

A. Center and Subwoofer
B. Rear Surround
C. Optical SPDIF Out port
D. Line-in
E. Front Left and Right
F. Microphone

3.5 CPU SOCKET
The surface of the LGA 1200 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for placement within the socket.

NOTE

• Always unplug the power cord from the power outlet before installing or removing the CPU.
• Please retain the CPU protective cap after installing the CPU.
• Confirm that the CPU heatsink has been mounted properly before booting.
• Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic protective cap.
• Please refer to the CPU cooler manufacturer’s instructions to install your cooler.

INSTALLATION

• Push down on the retention arm and outwards to release.
• Flip open the latch and place the CPU making sure the triangle and the notches on the CPU matches the corner as indicated.
• Close the latch and push down on the retention arm to lock it into place.
• The plastic protective cap will automatically become loosen.
• Apply thermal paste as needed and install your CPU cooler.

3.6 DIMM SLOTS
The DIMM slots are located here. Please see the diagram for recommended memory configuration.

NOTE

• Insert memory modules in the A2 slot first.

• Push the release lever as indicated.
• Match the memory with the middle notch and align into the DIMM slots.
• Push the memory into the DIMM slot firmly until the lever has been locked automatically.

3.7 PCI EXPRESS EXPANSION SLOTS
See the diagram below for the list of slots.
Please install graphics cards using the PCIEX16_1 first then the PCIEX16_2.

NOTE

• For a single PCIe x16, please use PCIEX16_1.
• When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

MULTI-GRAPHIC CARDS INSTALLATION

For power supply recommendations for multi-GPU configurations, please refer to the user guide of your graphics  card to make sure you meet all the system requirements.

To install multiple graphics cards:

• Turn off your computer zand disconnect the power cord, install two graphics cards into the PCIEX16_1 and PCIEX16_2 slots.
• Connect all PCIe power connectors of the graphics cards.
• Reconnect the power cord, power up the computer and install the drivers and software included in your graphics card package.

3.8 SATA CONNECTORS
These connectors are SATA 6Gb/s interface ports.
Each connector can connect to one SATA device. No ports utilize the same bandwidth with any M.2.

NOTE

• Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.
• SATA cables have identical plugs on either side of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.

3.9 M.2 SLOTS FOR STORAGE
There are two M.2 slots on the N7 motherboard.
You will need to remove the steel cover pieces prior to installation. The M.2 slots supports form factors up to type 2280.

NOTE

• If you have installed an M.2 drive, we recommend leaving the cover off to ensure optimal cooling for your M.2 drives.
• Intel® RST only supports PCIe M.2 SSD with UEFI ROM.
• Intel® Optane™ Memory Ready for all M.2 slots.

• Remove the M.2 slot cover.
• Confirm the standoff is at the required position and if necessary, move the standoff.
• Insert your M.2 drive into the M.2 slot at an angle.
• Secure the M.2 drive using the M.2 screw onto the standoff and tighten.

3.10 M.2 SLOT FOR WIRELESS CONNECTIVITY
A Key E M.2 slot supporting PCIe and CNVio is located at the center of the motherboard. This slot is prepopulated with an Intel ® WirelessAX210 and two antenna cables route the wireless signals to the rear I/O.

3.11 ANTENNA
Wireless antennas are included to boost the wireless and Bluetooth signals.

• Attach the antenna onto the rear I/O by securing them directly to the SMA ports labelled “Wi-Fi”.

3.12 POWER CONNECTORS
These connectors connect to an ATX power supply.

NOTE

• Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

3.13 USB CONNECTORS
These connectors allow you to connect to the front panel USB ports or devices requiring internal USB ports.

3.14 FRONT PANEL AUDIO CONNECTOR
This connector connects to the front panel audio on the case.

3.15 FRONT PANEL CONNECTOR
These connectors connect to the switches and indicator LEDs on the case.

**** IMPORTANT

• Please check the polarity of the pins to ensure your LEDs work properly.

3.16 FAN CONNECTORS
The CPU_FAN connector supports 4-pin PWM fans up to 2A (24W). The AIO_PUMP and the five SYS_FAN connectors automatically detects if a 4-pin PWM(Pulse Width Modulation) or 3-pin fan is in use and supports up to 2A(24W) each.
The fan speeds can be adjusted within CAM.

NOTE

• CAM is required to control the fans within Windows.

3.17 NZXT RGB CONNECTORS
There are two NZXT RGB headers located on the motherboard. The NZXT RGB ports are compatible with NZXT lighting accessories. Each channel supports up to 40 LEDs and up to 6 accessories.

NOTE

• CAM is required to control the lighting within Windows.
• Before installing or removing your lighting accessories, please power off your system and unplug the power cord from the power supply.

3.18 5V ADDRESSABLE RGB CONNECTOR
A 5V Addressable RGB is located on the motherboard. This port supports WS2812B addressable RGB LED strip (5V/Data/GND), with a maximum power rating of 3A  (5V) and supports up to 40 LEDs.

NOTE

• Never install RGB LED cables in the wrong orientation to prevent damage to the motherboard and lighting accessories.
• CAM is required to control the lighting within Windows.
• Before installing or removing your lighting accessories, please power off your system and unplug the power cord from the power supply.

3.19 12V RGB CONNECTOR
A 12V RGB is located on the motherboard. This port supports standard 5050 RGB LED strip (12V/G/R/B), with a maximum power rating of 3A (12V) and length within 2 meters.

NOTE

• Never install RGB LED cables in the wrong orientation to prevent damage to the motherboard and lighting accessories.
• CAM is required to control the lighting within Windows.
• Before installing or removing your lighting accessories, please power off your system and unplug the power cord from the power supply.

3.20 BUTTONS AND POST LEDS
Power and Reset Button
The power and reset button allow you to power on and reset the motherboard without connecting to a switch which is useful when testing.

BUTTONS AND POST LEDS

POST LEDs
POST LEDs diagnoses the computer when users power on their system. It will light up to indicate whether the CPU, memory, VGA or storage is dysfunctional.
The lights go off if the four mentioned above are functioning normally.

Clear CMOS Button
The Clear CMOS button located on the rear I/O can be used to revert BIOS settings to default. To clear CMOS, turn off the power and remove the AC power to the power  supply. Allow 30 seconds to ensure no standby power exists. Press and hold the Clear CMOS button for3 seconds.

DOWNLOADING NZXT CAM

Download and install NZXT CAM from nzxt.com/camapp.

5.1 NZXT GLOBAL WARRANTY POLICY
This NZXT Global Warranty Policy governs the sale of products by NZXT to you.

I. WARRANTY LENGTH
Any replacement product will be covered under warranty for the remainder of the warranty period or thirty days, whichever is longer. Proof of purchase is required for warranty service.

II. WHO IS PROTECTED
The Warranty covers only NZXT products purchased by the original consumer.

card, and AIO.   10-year warranty on PSU.
REFURBISHED NZXT PRODUCT| WARRANTY LENGTH FOR PARTS
All NZXT Certified Refurbished Products| 1 Years

NZXT GLOBAL WARRANTY POLICY

III. WHAT IS AND IS NOT COVERED
Please note that our warranty is not an unconditional guarantee. If the product, in NZXT’s reasonable opinion, malfunctions within the warranty period, NZXT will provide  you at its sole discretion with a repaired or replacement product, either new or refurbished, with a similar function that is equal or greater in value depending on supply.
Our warranty does not cover the following:

• any product or serial number/warranty sticker modification applied without permission from NZXT;
• any damage that is not a manufacturing defect;
• damage, deterioration or malfunction resulting from: accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification or  failure to follow instructions included with the product;
• improper installation, unauthorized alterations or modifications, or repair or attempted repair by anyone not authorized by NZXT;
• shipping or transport damage (claims must be made with the carrier);
• normal wear and tear.

NZXT does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose. For NZXT Store  orders, we cover two way return shipping for all exchanges and returns. For all other authorized dealers, NZXT Support does not cover return shipping and only covers one  way shipping from NZXT back to the end user for exchanges. Two way expedited shipping is provided for all PSUs covered under the Less Than Three program, indiscriminate of purchase location, provided the location is an approved NZXT reseller.

IV. EXCLUSION OF DAMAGES (DISCLAIMER)
NZXT’s sole obligation and liability under this warranty is limited to the repair or replacement of a defective product with either a new or refurbished product with a similar  function that is equal or greater in value at our option. NZXT shall not, in any event, be liable for any incidental or consequential damage, including but not limited to  damages resulting from interruption of service and loss of data, business, or for liability in tort relating to this product or resulting from its use or possession.

V. LIMITATIONS OF IMPLIED WARRANTIEST
Here are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose.
The duration of implied warranties is limited to the warranty length specified in Paragraph I.

VI. TO OBTAIN TECHNICAL SUPPORT
If you have already referenced your product owner’s manual and still need help, you may contact us by phone at +1 800-228-9395, by email at service@nzxt.com, or visit the NZXT Support site at nzxt.com/customer-support.

VII. HOW TO OBTAIN A WARRANTY SERVICE FROM NZXT
To receive a warranty service for your product when purchased directly from NZXT, you must submit a request via the NZXT Support site outlining the problem. If a  technician deems the product defective or requiring testing, you will be required to provide a copy of your proof of purchase, which will enable you to submit a Return  Merchandise Authorization “RMA” request.
Once approved, you`ll receive an RMA number, upon which you will be asked to ship the defective item back to NZXT with the RMA number clearly marked or labelled on  the package. NZXT recommends that appropriate measures are taken to safeguard the product from damage during shipping.

5.1 NZXT GLOBAL WARRANTY POLICY
VIII. APPLICABLE LAW AND ADDITIONAL LEGAL RIGHTS FOR CONSUMERS
This warranty gives you specific legal rights. These conditions are governed and construed in accordance with the laws of California (with exception of its conflict of law  provisions), and the application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. The non-exclusive jurisdiction of  the courts of California is agreed, which means that you may bring a claim to enforce your consumer protection rights in connection with this Global Warranty in the country which you have your habitual residence where you may have additional rights. These rights may vary.

For original consumers who are covered by consumer protection laws or regulations in their country, state, or province of purchase or, if different, their country, state, or  province of residence, the benefits conferred by this warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations. To the  extent that liability under such consumer laws can be limited, NZXT’s liability is limited, and its sole option, to repair or replacement, either new or refurbished, with a similar function that is equal or greater in value depending on supply.

In the United Kingdom:

• For NZXT products sold to customers in the UK, during the expected lifespan of your product your legal rights entitle you to the following:

  Up to 30 days: if your goods are faulty, then you can get an immediate refund.
  Up to six months: if your goods can’t be repaired or replaced, then you’re entitled to a full refund, in most cases.
  Up to six years: if your goods do not last a reasonable length of time you may be entitled to some money back.

• If the person seeking to rely on the guarantee is not the original consumer, the NZXT Warranty will cover the product in relation to that person provided that they are  able to provide proof of the transfer of the benefit of the guarantee from the original consumer.
  • The implied warranties under the Consumer Rights Act 2015 says that your goods must be as described, fit for all purposes for which such goods are usually supplied,  and of satisfactory quality.

In the EU:

• If you are a consumer and have your habitual residence in the EU, you additionally enjoy the protection afforded to you by provisions that cannot be derogated from by  agreement by virtue of the law where you have your habitual residence.

IX. WARRANTY SERVICE FROM RESELLERS
In the event that a warranty service is sought, you must provide proof of purchase (store receipt or invoice) in order to receive the service and if deemed necessary, repair or replacement product.

In North America:
Within the first 60 days after purchase, please return your product (or for power supplies installed within our enclosures, just the failed power supply) to your dealer or reseller  for a replacement. If the product is still within warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for  assistance and instructions. NZXT will not accept returns without prior approval and an RMA number.

In Europe:
Within the first year after purchase, please return your product (or for power supplies installed within our enclosures, just the failed power supply) to your dealer or reseller  for a replacement. If the product is still within warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for assistance and instructions. NZXT will not accept returns without prior approval.

In Australasia:
Within the first two years after purchase, please return your product (or for power supplies installed within our enclosures, just the failed power supply) to your dealer or  reseller for a replacement. If the product is still within warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for  assistance and instructions. NZXT will not accept returns without prior approval. The cost of shipping will be borne at the first instance by you; however, if the purchased  item is defective, NZXT will reimburse reasonable postage or transportation of costs.

Outside North America, Europe, and Australasia:
If your product needs to be returned within the warranty period, please contact the retailer or distributor from whom you purchased the product.

X. NZXT.COM STORE RETURNS/EXCHANGE POLICY
Eligible products under this NZXT Warranty qualify for a full refund or exchange only with an authorized RMA number and if the item is returned to the NZXT.com store  inventory within 30 days of purchase. Returns are not allowed beyond 30 days of the purchase date. The NZXT.com Store reserves the right to deny any return or exchange.  Refunds will be credited to the original method of payment. To initiate a return, simply submit a request via NZXT support site.

NZXT, Inc./ 15736 E Valley Blvd, City of Industry, CA 91744, USA
NZXT Europe GmbH/ Industriering Ost 66 | 47906 Kempen | Germany +1 800-228-9395 / service@nzxt.com / NZXT.com

Visit nzxt.com/warranty and support.nzxt.com for information on warranty coverage and service.

SUPPORT AND SERVICE

SUPPORT AND SERVICE
If you have any questions or problems with the NZXT product you purchased, please don’t hesitate to contact us using our support system. support.nzxt.com
Please include a detailed explanation of your problem and your proof of purchase. For comments and suggestions, you can e-mail our design team, designer@nzxt.com.  Lastly we would like to thank you for your support by purchasing this product.
For more information about NZXT, please visit us online. NZXT Website: NZXT.com

REGULATORY NOTICES

FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment onto an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

Shielded interconnect cables and a shielded AC power cable must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this  device. Changes or modifications not expressly approved by the system’s manufacturer could void the user’s authority to operate the equipment.

DECLARATION OF CONFORMITY
I. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING CONDITIONS:

• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesired operation.

II. THIS DEVICE IS IN CONFORMITY WITH THE FOLLOWING EC/EMC DIRECTIVES:

EN 55022| Limits and methods of measurement of radio disturbance characteristics of information technology equipment
---|---
EN 61000-3-2| Disturbance in supply systems caused
EN 61000-3-3| Disturbance in supply systems caused by household appliances and similar electrical equipment “Voltage fluctuations”
EN 55024| Information technology equipment-immunity characteristics – Limits and methods of measurement
EN 60950| Safety for information technology equipment including electrical business Equipment

III. CE CONFORMITY
NZXT Inc, declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.
IV. CANADIAN DEPARTMENT OF COMMUNICATIONS
This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations.
V. KOREAN CERTIFICATION MARK
Includes a KCC (Korean Communications Commission) certification number: KCC-R-R-ZXT-N7Z59XT.

**** R-R-ZXT-N7Z59XT

EUROPEAN UNION
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

TAIWAN
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

CALIFORNIA, USA
The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate

CAUTION

• There is a risk of explosion, if battery is incorrectly replaced. Replace with the same or equivalent type recommended by the manufacturer.

To protect the global environment and as an environmentalist, NZXT must remind you that…
Under the European (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, effective February 14, 2014, products of “electrical and  electronic equipment” cannot be discarded as municipal wastes, and manufacturers of covered electronics must take back such products at the end of their useful life. NZXT  will comply with the product take back requirements at the end-of-life of NZXT products that are sold within the EU. You can return these products to local collection points.

REVISION HISTORY

Version 1.0, 2021/04/10

Documents / Resources

| NZXT N7 Z590 ATX Motherboard [pdf] Instructions
N7 Z590 ATX Motherboard, N7 Z590, ATX Motherboard, Motherboard
---|---

References

• NZXT Custom & Prebuilt Gaming PCs, Parts, Peripherals | NZXT
• NZXT Custom & Prebuilt Gaming PCs, Parts, Peripherals | NZXT
• NZXT CAM | PC Monitoring and Configuration Software
• Customer Support | Gaming PCs | NZXT
• dtsc.ca.gov/hazardouswaste/perchlorate
• NZXT Custom & Prebuilt Gaming PCs, Parts, Peripherals | NZXT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>