Kahomvis FYC-QPW9-08E1 Motorized Treadmill User Manual

Kahomvis FYC-QPW9-08E1 Motorized Treadmill

INSTRUCTION

Thank you so much for purchasing our product. Please read this instruction carefully before use it and keep the instruction at proper place.

Caution

To avoid any injuries, please read this manual carefully before using.

• For safety purposes do not stand on running belt when starting the treadmill.
• Please stop immediately at the first sign of nausea.
• Please increase speed slowly if needed.
• Do not stand on belt while adjusting.
• It is recommended to wear athletic shoes when using the treadmill.
• Children, elder, pregnant women and patients recovering from injuries or surgery are prohibited to use the treadmill.
• Please clip the safety key on your clothing during use.
• Please firmly hold the rail bars during using.

Safety Notice

• Please put the treadmill on flat ground. It is unsuitable to put the treadmill at following places:
  • Outdoors.(The treadmill is specially designed for indoor use only)
  • Slanted ground or slanted places on balcony.
  • Sunlight area or near a heater/fireplace.
  • Big noisy places
• Errors may appear if the power supply is not stable. Please do not use the same socket together with computers, air conditioners, etc.
• It is suggested to wear athletic shoes and clothing when using the treadmill.
• Please increase or decrease speed slowly.
• Be careful of children or other objects while folding and unfolding the treadmill.
• Do not put the treadmill near wet objects. Errors may occur if item gets wet

Caution During Use

• If you do not feel well before using, please consult with your doctor or coach.
• Our company is not responsible for any injuries as a result of improper use
• Please unplug after using.
• Please unplug when moving the treadmill or changing parts.
• Children, elderly, and pregnant women are prohibited from using the machine. Patients should consultant their doctor before using.
• Please place the treadmill on a flat surface. Do not place any objects 2M behind the treadmill.
• Do not start the treadmill when it is folded.
• Keep water away from the treadmill, motor, power line, and plug.
• Do not use this treadmill in enclosed spaces or areas without air circulation.
• Do not place any objects on the treadmill.
• Keep plug away from hot locations or fireplaces.
• Please turn off treadmill and unplug after using.
• Please do not stand directly on the belt while starting the treadmill.
• Do not disassemble the treadmill without professional supervision.
• Please make sure the running belt is fastened before using.

Technical Specification

Assembly Instructions

1. Step 1 : After taking the treadmill out of the carton, first install gasket on the lower end of the frame, screw the knob (note: DO NOT TIGHTEN THE KNOBS FIRST).
2. Step 2 : Raise the handrail to the corresponding slot position of the main shaft, and then tighten the knob.
3. Step 3 : Insert the pad holder, put the safety key, and complete the assembly.

Display Monitor

1. Window shows

2. “TIME” window : hows the running time. Forward travel-time is from 0:00~99:59, countdown is counted to 0 from the set time (set cope 5:00~99:00), when count to 0:00, the treadmill will stop slowly.
   “CALORIES” window : forward count from 0~99, when forward countdown reaches the top point, it will recount. When calories count down (calories set cope 20.0~990.0), it will count to 0 from the set point; when count to 0:00, the treadmill will stop slowly. When in motion state, press “M” key, the window will switch from Time, Calories, Distance, Step

3. “SPEED” window : shows the current running speed, speed range is 0.5~6.5mph

4. “DISTANCE” window : shows the current movement distance. Forward countdown is from 0.0~99.9. When forward count down reaches the top point, it will recount. When distance count down (distance set cope 1.00~99.00) it will count to 0 from the set point, the treadmill will stop slowly.
   “STEP” window: Forward step count is from 0~9999. When forward countdown reaches the top point, it will recount.

5. Functional instruction

6. Sports Mode : Press “START” key to start the treadmill, SPEED window will count from “3 2 1”. The default speed is 0.5MPH, press “+” or “-” to adjust speed.

7. Countdown Mode : when in standby, press “M” key to choose Time, Distance or Calories countdown. Press “+” or “-” to set relevant data. After setting, press “START/STOP” to start the treadmill and it will count down from the set data. When count to 0, the machine will stop by itself.

8. Pre-set Program (01~P12): choose one program, then press “+” or “-” to set the running time (time set cope 5:00~99:00, default time is 30:00). Press “START/STOP” to start the treadmill, it will run based on the pre-set speed. Speed changes according to the time “(Time/20)”

Fold and Unfold

Fold:
Take off IPAD holder, unscrew the knob, lie down the handrail. Then screw the knob with the frame.

Unfold：
Loosen the knob and uplift the handrail to the certain angle, then insert the pad holder.

Usage Of Silicone Oil

Before you start the treadmill, please lubricate the running belt first. Pull up tightly of the running belt. Then apply the silicone oil to the running board. Start the machine and let it run for 3 minutes without using. It is recommended to do this after every 30 hours of use. This can extend the lifetime of parts.

As per inquiry or aftersales service，please contact us ： Cathy_Kaihome@163.com

Belt Adjustment

1. Running belt deviates to left
   Start the machine at speed 0.5-2 MPH (don’t stand on machine). Use the Allen wrench to turn the screw clockwise until desired fit (see fig1). Then let the machine run without loading for 1-2 minutes. Please adjust like this until the belt is in the middle.

2. Running belt deviates to right
   Start the machine at speed 0.5-2 MPH (don’t stand on machine). Use the Allen wrench to turn the screw counterclockwise until desired fit (see fig2). Then let the machine run without loading for 1-2 minutes. Please adjust like this until the belt is in the middle.

3. Running belt stuck
   If the running belt is not moving, use the Allen wrench to turn the screws 180 degrees on both left and right sides until this is solved.

Daily Maintenance

1. Please switch off and unplug from power outlet before checking the machine or clearance.
2. Clear belt and dial plate after use, once every week at least.
3. Check and tighten screws and bolts.
4. Do not hang up clothes, etc. on the machine.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>