Kahomvis HG-LKW1-3263 Professional Indoor Ergonomically Designed Exercise Training Bike Instruction Manual
- June 12, 2024
- Kahomvis
Table of Contents
HG-LKW1-3263 Professional Indoor Ergonomically Designed Exercise Training
Bike
Instruction Manual
HG-LKW1-3263 Professional Indoor Ergonomically Designed Exercise
Training Bike
PART L LIST
NO. | DESCRIPTION | SIZE | QTY |
---|---|---|---|
16 | Carriage boat | M8×50 | 4 |
13 | washer | Ø8 | 4 |
12 | Cap nut | M8 | 4 |
14 | Rear foot tube | 1 | |
17 | Adjustable foot screw | 4 | |
11L | Left pedal | 1 | |
11 R | Right pedal | 1 | |
14 | Front foot bubo | 1 | |
7 | Knob | Torn | 1 |
7 | Knob | 1 | |
6 | Cushionknob | 1 | |
5 | Cushion lifting pipe | 1 | |
4 | Cushion soleplate | 1 | |
1 | Cushion | 1 | |
10 | Lifting pipe | 1 | |
3 | handlebar | 1 | |
15 | Mobilephonebracket | 1 | |
8 | Digital watch | 1 | |
9 | Hand bolt | M6 | 4 |
2 | Nut | M6 | 4 |
ATTENTIONS
Before you do any exercise program, it is recommended that you consult your doctor first. Check that all bolts on the equipment are locked. Do not expose the equipment to damp places, which will cause trouble. (Any failures and injuries are caused by the above reasons, we do not bear any responsibility) before starting the exercise, please wear sports clothes and sports shoes. Any strenuous exercise can only be started after 40 minutes after a meal. In order to prevent injury, please warm-up before exercising. People with high blood pressure should consult a doctor before exercising. Do not insert any other items in any part of the equipment that will damage the equipment.
MAINTENANCE INSTRUCTIONS
-, the scope of warranty coverage: the product in the correct maintenance of the case, the normal use of occasional non man-made damage. The warranty card is limited to the original purchaser and cannot be transferred. Second, the warranty period · Household· Steel frame 3 Year warranty · Other parts warranty 12 months three, the following conditions are not covered by the warranty: As a result of abuse, negligence, accidents or unauthorized modification caused by damage; Damage caused by abnormal maintenance; Other irregularities and the resulting damage.
Assembly Instructions Assembly Step One:
Open the box, remove the above material from the case, and place the main
frame flat on the ground. Using an open wrench, the semicircle head square
neck bolts (16) are put on the washer (13), the cover nut (12) respectively
the forefoot tube 14) and the hind leg tube are locked in the main frame (14).
Second step:
- Insert (5) cushion lifting pipe into main frame. Unscrew the (7) Pull knob. Cushion (1) is locked in the cushion mounting seat (4), pad on the large flat pad (3), with (6) Nut lock on (5) Cushion lifting tube. 3, the left L, right R pedal respectively locked in the main frame (on. (Note that the left and right, and then the thread to tighten)
Thirds step:
- Insert (10) The lifting pipe into the main frame. Lock (7) Draw knob. The (3) hand tube (9) bolt, (2) nut is installed in (2) hand to install the electronic meter of the lifting pipe (8) handle. Please note: Be sure to confirm all according to the above
requirements of the part and after installation and then unified locking all the Bolts product warranty Card production model: Purchase Date:
User name: Tel: Address: Postal code: In accordance with the instructions or the contents of the notice, in the normal use of the company’s products failure, the company will (from the date of purchase) 7 days of replacement, steel three years, accessories one year free maintenance, life-long maintenance! The company will charge the cost of accessories
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>