Kahomvis BSTG-LKWMC-21R Rectangular Black Wood Surface Mount Medicine Cabinet with Mirror Installation Guide
- June 5, 2024
- Kahomvis
Table of Contents
BSTG-LKWMC-21R Rectangular Black Wood Surface
Mount Medicine Cabinet with Mirror
Installation Guide
IMPORTANT NOTICE
We will guarantee all customer benefits. The products we ship out are brand
new. Please check carefully before installation, and compare all parts with
the parts listed in the package contents section. If any part appears missing
or damaged, do not install it.
Contact customer service by E-mail:
service@getprohome.com
Send us the pictures or video, we promise will respond to you within 24 hours.
We will decide to send you spare parts or deliver a replacement for free.
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you
carefully read through this instruction sheet, and refer back to them during
installation to ensure your product is fitted safely and correctly. Keep these
instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and mainte nance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer, and all other parts for damage. If any part is dam get the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CATION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution, and care, are factors
that can’t be built into any product. These factors must be supplied by the
person(s) caring for and operating the fixture. Do not install this fixture in
hazard ous locations.
TOOLS REQUIRED
HARDWARE LIST
ITEM
| REFERENCE IMAGE| NAME|
QTY
1|
| Nut|
4
2
| |
Screw ST4’35
| 4
3| | Wall Anchor|
4
4
|
| Gasket|
4
Step
Step 1
Use the tape measure to survey the high, and draw the horizontal line and the
vertical line of the washbasin. 
Step2
Make the bottom parallels with the horizontal line, then mark 4 holes’ place
with a tape measure.
Step3
Drill the hole and inject the green rubber pellets
step 4
Drive in the screw across the Gasket.
Step 6
Screw in the nut.
Step 7
The opening of the mirror cabinet door is 110° Step 8
After power on, the button shows blue and it is in waiting for the state
lick to turn on the defogging function and the button turn to white
Click again to turn off the defogging function and the button turn to blue
Step 9
After power on, the button shows blue and it is in waiting for state
This is the LED switch. Our light is white light