TREND LIGHTING TW40006ASL Vitozzi Antique Silver Leaf 27 Lighting Sconce Instruction Manual

TREND LIGHTING TW40006ASL Vitozzi Antique Silver Leaf 27 Lighting Sconce

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

**CAUTION

**

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

1. OUTLET BOX
2. GROUND WIRE
3. BLACK WIRE
4. WHITE WIRE
5. WIRE CONNECTOR
6. WALL ANCHOR
7. MOUNTING PLATE
8. MOUNTING SCREW
9. WALL SCREW
10. BACK PLATE
11. BACK PLATE SCREW
12. ALLEN WRENCH
13. BALL NUT
14. FRAME
15. MOUNTING SCREW

Extra crystals are provided for replacement

ASSEMBLY AND INSTALLATION

1. Mount the wall anchor (6) to the wall. Secure the mounting plate (7) onto the outlet box (1) , using mounting screws (15) and uses the wall screw (9) to tighten the
   mounting back plate.

2. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections.

   • White wire from light to White wire (4) from power source.
   • Black wire from light to Black wire (3) from power source.
   • Loop the ground wire (2) to mounting plate (7) with a ground screw (8).

3. Tuck wire connections neatly into the wall outlet box. Place the back plate (10) over the mounting plate (7) and secure it with the ball nut (13).

4. Attach the frame (14) onto the back plate (10), aligning the threaded holes in the back plate (10) with the holes on the frame (14). Insert the 4 back plate screws (11), using allen wrench (12) until secure.

5. Install bulbs: (bulbs not included) (Do not exceed the maximum capacity recommended on the sockets).

INSTALLATION IS NOW COMPLETED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>