Lucci decor 269355 Emmerson LED Floor Lamp Instruction Manual

269355 Emmerson LED Floor Lamp
Instruction Manual

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation, and use of this product. Please keep the instructions for future reference.

Warranty

• This fitting is covered by a 3-year warranty from the date of purchase. Please retain the proof of purchase.
• The warranty will be void if there is any damage due to improper usage or modification to the fitting.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

Installation Requirements

• Select a suitable location for this light fitting:
  – This product is suitable for indoor use only.
  – Do not place flammable material near or over the fitting.
  – Ensure the fitting is not installed in the direct line of an air vent/system.
  – If the fitting is placed in an area prone to moisture, ensure that the area is well-ventilated and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.

• Take care not to pull any electrical wires during unpacking as this may damage the connection.

• Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
  If parts are missing, return the complete product to the place of purchase for inspection or replacement.

• Check whether the fitting has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair, or replacement.

• Do not plug into the mains power socket outlet before or during assembly. Only do so after the portable lamp is fully assembled with the globe installed and is ready to use for the first time.

Installation Directions

1. Remove all packaging material from the product.
2. To help with assembly, lay the fitting on its side on a smooth non scratch surface.
3. Insert the plug (B) into the mains power socket outlet and ensure it is fully plugged in.
4. Turn the power on at the mains power socket outlet.
5. Use the cord line dimmer switch (A) to turn the lamp on/off or dim the fitting.

Safety Tips

• Always ensure the power is OFF and the fitting has cooled down before performing any maintenance and cleaning to the fitting.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cable or cord is damaged, the luminaire shall be destroyed.
• Young children should be supervised to ensure that they do not play with the portable lamp.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
• Ensure that the fitting does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>