MAXIM E30184-01BK Tower Outdoor Wall Sconce User Manual
- June 3, 2024
- MAXIM
Table of Contents
MAXIM E30184-01BK Tower Outdoor Wall Sconce
Before Getting Started
Before Getting Started
Read the instructions carefully prior to assembling
the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of
reach of small children.
Choose a clean, level,spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all the required content for
complete assembly.
Take care when lifting. Assemble the product in
close proximity to where you intend to position the item.
Do not over-tighten the screws and bolts as this
may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from the power source before
assembling or cleaning.
Switch off, unplug and allow the bulb to cool before replacing the bulb or
cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause a fire.
Do not plug the product inifcord is torn or frayed.
For outdoor use, caulk around the fixture with silicone sealant to prevent
water intrusion.
Cleaning & Maintenance
- Apply high-quality car wax to the fixture regularly to protect it from environmental factors that can damage the metal.
- Clean with a soft cloth and mild detergent. Do not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause the color to fade.
Contents
Before getting, started, ensure the package contains the following components:
Installation
Wiring
Caulk around the backplate where the fixture meets the wall and leave a hole at the bottom to allow water to escape.