WELLFOR DTG-3224M3ZK1 24-in W x LED Lighted Silver Rectangular Bathroom Instruction Manual

June 3, 2024
WELLFOR

WELLFOR DTG-3224M3ZK1 24-in W x LED Lighted Silver Rectangular Bathroom

WARNING AND SAFETY INSTRUCTIONS

Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.

WARNING Risk of Fire and Electric Shock

  • All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
  • Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
  • Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
  • Regularly check the cord, the transformer and all other parts for damage, if any part is damaged the product should not be used.

INSTALLATION SAFETY

  • Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
  • Ensure there are no hidden pipes or cables in the wall before drilling.
  • Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.

CAUTION
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazardous locations.

PRODUCT DESCRIPTION

CHECK PRODUCT LIST AFTER OPENING THE PACKAGE

  • LED Lighted Mirror   – -1pcs
  • Installation Manual     – -1pcs
  • Z-bar     – -4pcs One as a spare part
  • REJSBM2432VCSKXXX-Wall Mounting Screws     – -4pcs One as a spare part
  • REJSBM2432VCSKXXX-Drywall Anchor     – -5pcs One as a spare part

WELLFOR-DTG-3224M3ZK1-24-in-W-x-LED-Lighted-Silver-Rectangular-
Bathroom-1

Series: REJSBM2432VCSKXXX
Size: W610XH812MM

WELLFOR-DTG-3224M3ZK1-24-in-W-x-LED-Lighted-Silver-Rectangular-
Bathroom-2

All diagrams are for reference only. All model dimensions and proportions position will vary.

PRODUCT DESCRIPTION & INFORMATION

WELLFOR-DTG-3224M3ZK1-24-in-W-x-LED-Lighted-Silver-Rectangular-
Bathroom-3

INSTALLATION PROCESS

WELLFOR-DTG-3224M3ZK1-24-in-W-x-LED-Lighted-Silver-Rectangular-
Bathroom-4 WELLFOR-
DTG-3224M3ZK1-24-in-W-x-LED-Lighted-Silver-Rectangular-
Bathroom-5

Hardwire Supported(UL Listed)

  1. Step 1:
    Use an I-Beam level to mount the included mounting bracket with 3 screws (Use anchor when it’s installed on drywall, concrete or tile surface).

  2. Step 2:
    Make sure the circuit breaker for the power source of the mirror is off. Then connect the neutral (White), hot (black) and ground (copper wire or Green) wire between the mirror and the junction box.

  3. Step 3:
    Hang the mirror with desired placement by mirror Z-bar on to the mounting bracket.

OPERATION PROCESS

  1. Button 1:
    First short press, the anti-fog function works . Second short press, the anti- fog function stops . The two operations loop in turn.

  2. Button 2:

    • Short press (< 1 second) the LED light switch button to turn on / off the LED lamp.
    • Long press (> 1 second) the button to adjust the brightness. When the LED is on,
      long press the button to activate dimming. The LED brightness changes in loop from 100% to 5%, or from 5% to 100% on the second press.

LED Mirror Power Source FAQ

Scenario 1 (Wall Switch)
By doing so, the mirror is now bridged to the wall switch. In order to turn on the mirror, the wall switch needs to be on. The touch switch can be used to turn on the LED mirror and anti-fog pad. The mirror shuts down once the wall switch is flipped to OFF.

Scenario 2
(Wall Dimmer Switch – Not Accepted) This is a scenario that is not acceptable. There is no work around for our mirror.

Do not try this way as it will damage the LED driver.

For customer support please call 626.708.1381 weekdays 9:00 to 6:00 PST, or by email: service@wellfor.com. For more information: www.wellfor.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

WELLFOR User Manuals

Related Manuals