TOUCHBeauty TB-1039 5 in 1 Electric Manicure-Pedicure Set Instruction Manual
- June 13, 2024
- TOUCHBeauty
Table of Contents
5 IN 1 ELECTRIC MANICURE / PEDICURE SET
TB-1039
INSTRUCTION MANUAL
Safety Instructions:
To ensure proper operation of this appliance, please read this instruction
manual carefully before using the appliance and keep it for future reference.
WARNING
- Do not use the appliance under the following conditions: children; persons with skin allergies; on fingers or toes with skin inflammation; persons with reduced physical, sensory or mental capabilities.
- Immediately stop using the appliance, and consult a doctor if you feel unwell.
- Do not use this appliance for any other purpose then nail care.
- Do not place the appliance in hot or humid places.
- Do not attempt to modify, disassemble, or repair the appliance by yourself.
CAUTION
- If you do not intend to use the appliance for a long time, please remove the batteries.
Product Specifications:
- Name: 5 in 1 Electric Manicure / Pedicure Set
- Model No.: TB-1039
- Power: 3V ****/0.54W
- Type of Battery: AAA x 2 (Not Included)
- Executive Standard: Q/XM1006-2020
Product Description:
- Felt Polisher
- Polisher Cylinder
- Cuticle Head
- Nickel Grinder
- Sandpaper Grinder
- Power Switch
- Battery Cover
- Storage Case
How to Use:
-
Preparing for Use
To ensure the correct operation of this appliance, please read the instructions carefully before use.
※ Remove the Battery Cover (picture 2) and insert two AAA batteries as indicated in the battery compartment (batteries not included). -
Using the Appliance
- Select the attachment you want to use. Follow below instructions for nail
care:
Sandpaper Grinder: Grinds thick nails to a perfect shape.
Cuticle Head: Can be used to remove cuticles from the sides and edges of the nail.
Polisher Cylinder: Ideal to use on acrylic nails, shortens and shapes the edge of the nails, can also be used in natural nails.
Felt Polisher: Polishes nails giving it a glossy finish.
Nickel Grinder: Files acrylic and natural nails with precision. - After selecting the grinding head you want to use, install it firmly into the appliance until it locks in place. Slide the Power Switch to “1” to switch on the appliance and the low speed. Slide the Power Switch to “2” to change to high speed (picture 3).
- Slide the Power Switch to “0” to switch off the appliance after use.
Cleaning & Maintenance:
- Turn the appliance off before you start cleaning it.
- Do not wash this appliance or immerse it in water. You can clean the attachments separately.
- Clean the appliance body with a dry or slightly wet cloth.
- Do not use water, alcohol, steel wool, abrasive cleansers, or corrosive liquids to clean the appliance.
Service:
-
Eco-Friendly Tips
Batteries contain substances harmful to our environment. Please do not dispose of the appliance with the batteries inside, remove the batteries and recycle it for environmental protection. -
Troubleshooting**
Problem| Possible Cause| Solution
---|---|---
The appliance
does not work| The batteries are running low.| Replace the batteries as guided.
The batteries are out of power.
The batteries were installed incorrectly.| Install the batteries correctly.
Abnormal Noise| Grinding Head was installed nstalled incorrectly.| Install the Grinding Head correctly as guided.
Other problems.| | Contact your local retailer.
Note:** If the appliance still does not work properly after using above solutions, please stop using the appliance and contact your local retailer.
After-Sales Service
If you need to learn about our products or if you need any information, please
visit our website www.touchbeauty.com or contact
our customer service team at
customer@touchbeauty.com.
MANUFACTURER: TOUCHBEAUTY BEAUTY & HEALTH (SHENZHEN) CO., LTD
ADDRESS: 601 & 602, Block F5, TCL International E-City, 1001
Zhongshanyuan Road, Shuguang Community, Xili Subdistrict,
Nanshan District, Shenzhen, China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>