CHIEFTEC AS-01B-OP Mid-Tower Case Instruction Manual
- June 3, 2024
- CHIEFTEC
Table of Contents
AS-01B-OP Mid-Tower Case
Product manual
Elox Series / A S-01B-OP
I/O PORTS
- Power Switch
- Reset button
- HD Audio
- USB 2.0
- USB 3.0
SPECIFICATION
| Model No. | AS-01B-OP |
|---|---|
| Materials |
SPCC 0.5mm mixed thickness black inner
chassis
Motherboard support| ATX/M-ATX/ITX
PSU type|
ATX PSU (Bottom located)
TOP panel I/O ports|
USB3.01+USB2.02, HD Audio
Drive Bays|
3.5” HDD1 + 2.5” SSD3 or 3.5” HDD2 + 2.5” SSD2
Expansion Slots|
7 slots , Support up to 340mm (Max.) VGA card
CPU Cooler Height| 170mm
Fan Cooling
|
Front: 312cm or 214cm Fans(Optional)
Top: 212cm or 214cm Fans(Optional)
Rear: 1*12cm Fan(Optional)
PSU Cover: 2*12cm Fans(Optional)
Liquid Cooling
|
Front: 120/140/240/280mm liquid cooling(Optional)
Top: 120/140/240mm liquid cooling(Optional)
Rear: 120mm liquid cooling(Optional)
Chassis size|
(L)360 x (W)210 x (H)440mm
Case size|
(L)408 x (W)210 x (H)460mm
REMOVE THE SIDE PANELS AND FRONT PANEL
Loose the drop-proof screws, pull out the side panel toward to the arrowhead direction.
Put hand into bottom of front panel , then you can pull up it.
EXPLOSIVE VIEW
- Chassis
- Left side panel
- Right side panel
- Front panel
- PSU cover
- HDD bracket
- SSD bracket
- Magnetic dust filter on the top
- Dust filter on the bottom
- 1*120mm fan on the rear(included)
- 2*120mm fans on the top(optional)
- 3*120mm fans on the front(optional)
- 2*120mm fans on the PSU cover(optional)
POWER SUPPLY INSTALLATION
Insert PSU from left side
Secure with screws
MOTHERBOARD INSTALLATION
Put M/B on right position of chassis which preinstalled iron screws.
Use the provided standoffs and screws to secure the motherboard
VGA CARD INSTALLATION
Remove the PCI slot protection cover. Install the graphics cardSecure it with a screw.
HDD AND SSD INSTALLATION
HDD installation
Loosen 2pcs screws for HDD bracket, pull out HDD bracketSecure with screws
LIQUID COOLING INSTALLATION
Put the 120mm radiator in the rear panelSecure with screwsPut the radiator in the front panelSecure with screwsFix SSD on bracket up side and secure with screws first, then fix HDDPut bracket on chassis after HDD installation, and secure with 2pcs screws
SSD installation
Take off SSD bracket, then fix SSD on bracket and lock bracket to previous place
Put the radiator in the top panelSecure with screws
Front: 120/140/240/280mm liquid cooling (optional)
Top: 120/140/240mm liquid cooling (optional)
Rear: 120mm liquid cooling (optional)
FAN INSTALLATION
Front: 120mm x3 or 140mm x2(optional)
Top: 120mm x2 or 140mm x2(optional)
Rear: 120mm x1 (included)
PSU Cover: 120mm x2 (optional)
IN THIS YOU CAN TRUST
Manufacturer: Arena Electronic GmbH
Koppersstr. 18 , 40549 Dusseldorf, Germany
www.chieftec.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>