CHIEFTEC BX-10B-OP Glass Window Case User Manual

CHIEFTEC BX-10B-OP Glass Window Case

Accessory

Connectors

Exploded view

1. Side Panel
2. Top cover
3. Chassis
4. SSD Bracket
5. Air Filter

installation Guide

1. Loosen the screws, and then pull the top cover back to loosen it
2. Loosen the side panel screws, and then lift the side panel

Insert the MB IO Shield, and then place the motherboard on the corresponding position and secure with screws

1. Remove the PCI bracket
2. Install the GPU/PCI add-on card

1. Remove SSD bracket
2. Place the PSU on the corresponding position and secure with Screws

3.5″ HDD hard drive mounting position compatible with 2.5″ SSD

Pre-mount rubber grommet with screw to 2.5″ SSD, and then insert it into SSD bracket slot

Remove the bottom rubber grommets before installing case fan

1. Insert the side panels to the case, and secure them with screws.
2. Place the top cover into slots, push it towards the front, fix it with screws

Suggested Thermal Solution

Pay attention to the airflow direction inside the chassis

Additional Information

Additional Information

CPU Cooler Limitations| 168mm H Max.
Graphics Card| 305(PSU >170MM L)~355mmL Max.
Power Supply| ATX PSll 220mm L Max.
Motherboard Limitations| M-ATX/ ITX
Radiator Limitations I| TOP: 240mm x 1, BOTTOM 240mm x1, Rear 120mm x 1
Drive bays I| 2.5″ SSD x 4 / 2.5″ SSD x3+3.5″ HOD x 1

Manufacturer: Arena Electronic GmbH
Koppersstr. 18,40549 Düsseldorf, Germany
www.chieftec.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>