ecowitt GW1100 Wi-Fi Weather Station Sensor Gateway User Guide
- June 4, 2024
- ECOWITT
Table of Contents
ecowitt GW1100 Wi-Fi Weather Station Sensor Gateway
INTRODUCTION
Attention
Our product is continuously changing and improving, particularly online
services and associated applications.
To download the latest manual and additional help, please contact us at
support@ecowitt.com or
support.eu@ecowitt.net (EU/UK).
Manufacturer
ShenZhenShi OuSaiTeDianZi YouXianGongSi
Add: C Dong 4 Ceng A, Minzhujiujiugongyecheng AQu, Xihuanlu, Shajingjiedao,
Baoanqu Shenzhen, Guangdong 518101, CN E-mail:
support@ecowitt.com
support.eu@ecowitt.net (EU/UK)
- Please scan the QR code to read English manual and keep it for future reference
- Bitte scannen Sie den QR-Code zudeutsche Anleitung lesen und aufbewahren füZukunftsbezug
- Si prega di scansionare il codice QR perleggi il manuale italiano e conservalo perReferenza futura
Instruction manuals
https://www.ecowitt.com/support/download/106
GW1101, GW1102,GW1103,GW1104
Descriptions
Warning
- Any metal object may attract a lightning strike, including your weather station mounting pole. Never install the weather station in a storm.
- If you are mounting the weather station to a house or structure, consult a licensed electrician for proper grounding. A direct lightning strike to a metal pole can damage or destroy your home and the product.
- Installing your weather station in a high location may result in injury or death. Perform as much of the initial check out and operation on the ground and inside a building or home. Only install the weather station on a clear, dry, day.
- Please setup the system and put the sensors in a conveniently accessible temporary location for a few days, familiar with the system and make sure the system operate normally before install them into a permanent position. When you mount the sensor, remember to take your phone and have the webpage showing the data displayed, before fixing to the mounting pole, be sure you can see the signal can be picked up by the GW1100 gateway reliably. So check out on site system data while you are mounting the sensors.
Model difference overview
WN31(EN31) &WN32
WN31(EN31) and WN32 looks quite similar, but with different function
definition applied. WN32 is a dedicated outdoor temperature and humidity
sensor, it has highest priority against WS69 or WS80 integrated sensor
temperature and humidity data.WN31(EN31) is a dip switch selectable multi-
channel temperature and humidity sensor. It supports maximum 8 channels.
Sensor operates on 2pcs AA Alkaline batteries.
WH40
WH40 is a rain gauge. Be sure to lock the funnel firmly and in position( tell
by having the arrow mark matched). The battery door should be tightly locked
without gaps. 1pc AA battery ( Lithium non rechargeable recommended). LED
flashes every 49s in normal operation. Press “RESET” button if LED doesn’t
light up or stays on all the time.
WS68
It operates on 1 AA battery ( Lithium recommended ).
1.Wind speed cups | 6. LED (red) to indicate data transmission |
---|---|
2.Wind vane | 7. Light sensor and UV sensor |
3. Connection tube | 8. NORTH arrow |
4. U-Bolts | 9. Solar panel |
5. Mounting Pole(not included) | 10. Reset button |
WS69
It requires 2pcs AA Lithium(recommended) or Alkaline batteries. LED flashes
every 16s in normal operation. Press “RESET” button if LED doesn’t light up or
stays on all the time.
1.Wind Speed cups | 7. Antenna |
---|---|
2.Wind Vane | 8. U-Bolts |
3.Thermo- and hygro-meter sensors | 9. Battery compartment door |
4. Rain collector | 10. Reset button |
5. Bubble level | 11. LED (red) to indicate data transmission |
6. Solar panel | 12.Light sensor and UV sensor |
WS80
It requires 2pcs AA Lithium(recommended) or Alkaline batteries. LED flashes
every 5s in normal operation. Press “RESET” button if LED doesn’t light up or
stays on all the time.
1. Surface tension conditioner layer (patent
pending)
| 7. Mounting arm
---|---
2. Battery compartment| 8. Mounting bracelet and U-bolt set
3. Temperature & humidity sensor| 9. Power cord for built-in heater(12v1.0A)
4. Light & UV sensor, LED indicator| 10. USB port (factory use only)
5. Solar Panel| 11. Calibration button (factory use only)
6. NORTH alignment indicator| 12. Reset button
When new sensor is powered, usually the GW1100 gateway will automatically pick up the data and value is displayed at the live data page. In case GW1100 gateway has previously memorized sensor ID learned before during factory QC control testing, it is needed to go to live data page, make “register” action to force gateway to search for new sensors around.
GW1105, GW1105N,GW1106,GW107 Descriptions
Ecowitt home care series products measures air quality and garden plants soil moisture. The Model difference overview:
Sensor Matched
|
GW1105
|
GW1105N
|
GW1106
|
GW1107
| Sensor
Number
---|---|---|---|---|---
Indoor CO2| WH45N| | R| | | 1*
Indoor PM2.5| WH43| | | | R| 4
Indoor
Co2+PM2.5, PM10
|
WH45
|
R
| | | |
1*
Soil Moisture| WH51| | | R| | 8
Please look at the special marking in the below description for sensor QTY
supported.
WH43,45N,45
The three model looks quite similar with the housing, and it is designed for
indoor air quality measurement. The power supply is from the USB ports at the
side of the sensor housing, and the two AA alkaline batteries are mainly for
back up purpose. The sensor wakes up and take a measurement once every minute.
When at very quiet night time, the tiny sound of fan being turned on
periodically is noticeable. Please be noted that WH45 and WH45N can’t be
received at the same time on the same GW1100 gateway: it is allowed to have
only one of them to be paired. WH43 allows maximum 4 devices to be connected
at the same
No | Description | No | Description |
---|
1
| Red LED Indicator (RF transmission)|
3
| Battery Compartment Cover
2
| AC Adapter USB Power Port|
4
|
Battery Compartment
WH51
WH51 measures soil moisture level, and it is very useful in telling the
relative moisture level change status. Once we know the level when just
watered, and then wait until the reading dropped to a certain level and it can
remind us to water the plant again, so we won’t miss the timing that the plant
start to be “thirsty”.
1 | LED Indicator (RF transmission) |
---|---|
2 | Battery Cap |
3 | Soil Moisture Sensor |
4 | Battery Door Protection Cover |
Place one AA alkaline battery in the sensor and close the battery door.
Place the extra protection sensor cap over the battery door to achieve better sealing against moisture.
References
- ECOWITT Welcome to Ecowitt!
- Ecowitt Weather
- Professional Weather Products | Smart Home Product – Ecowitt