ecowitt WH0298-C Console User Manual
- June 3, 2024
- ECOWITT
Table of Contents
Console
Operation Manual
Model No.: WH0298_C
WH0298-C Console
Instruction manuals
https://s.ecowitt.com/8SM437
＊Please scan the QR code to read English manual and keep it for future
reference
＊Bitte scannen Sie den QR-Code zudeutsche Anleitung lesen und aufbewahren
füZukunftsbezug
＊Si prega di scansionare il codice QR perleggi il manuale italiano e
conservalo perReferenza futura
Help
Our product is continuously changing and improving, particularly online
services and associated applications. To download the latest manual and
additional help, please contact our technical support team:
support@ecowitt.com
support.eu@ecowitt.net (EU/UK)
Display Console Set Up
-
Remove the battery door on the back of the display, as shown in Figure 1. Insert one AA (alkaline, lithium or rechargeable) battery in the back of the display console.
① Integrated Hanging
Hole
② Tabletop Stand
③ Switch Channel
④ Switch ℃/℉
⑤ Battery Compartment
⑥ Battery Compartment Cover -
All of the LCD segments will light up for a few seconds to verify all segments are operating properly.
-
There are 1s display device info after full display:
① Radio frequency (RF)
② Firmware version
③ Default: 0
Note: different package version with different info.
4. Replace the battery door and fold out the desk stand and place the console in the upright position.
5. While in the search mode, the reception search icon flash.
Display Layout
- RF signal
- Current temperature
- Channel
- Humidity
- Past 48Hrs Hi/Lo
- Maximum temperature
- Minimum temperature
- Maximum humidity
- Minimum humidity
Console Operation
Note: default normal mode when non-operation over 15s. ’hold key’ means hold
the key until some change on display, but no more than 5s.
3.1 Normal mode
Press [CH]: choose channel between 1 to 8 or auto recycling between 8
channels.
Hold [CH]: reset current channel data and start to search for sensor data
again. At recycle mode, search for all sensors.
Press [℃/℉]: switch ℃/℉.
Hold [℃/℉]: Reset Hi/Lo with current reading.
Tips
- Receive sensor in once about 1 minute, but depend on channel.
- Wireless Signal Strength Indicator During the synchronization, it will reduce one signal segment if it have not received the signal once from the transmitter. It will increase one signal segment if it has received the signal once.
Specifications
- LCD screen: 3 inch
- Frequency: 433/868/915/920 MHz
- Update Rate: About 1 minute
- Power Consumption: minimum 1 year battery life.
- Base station (display console) : 1 x AA battery(not included)
- Length Width Height: 85.48 x 77.48 x 25.5mm
Warranty Information
We disclaim any responsibility for any technical error or printing error, or
their consequences.
All trademarks and patents are recognized.
We provide a 1-year limited warranty on this product against manufacturing
defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only
on products purchased and only to the original purchaser of this product.
To receive warranty service, the purchaser must contact us for problem
determination and service procedures.
This warranty covers only actual defects within the product itself, and does
not cover the cost of installation or removal from a fixed installation,
normal set-up or adjustments, claims based on misrepresentation by the seller
or performance variations resulting from installation-related circumstances.
| AC WORKS CONSULTING Srl Via Vilfredo Pareto 125,47521 Cesena (FC),ITALY
---|---
| HUA TENG LIMITED 3 Glass Street, Hanley, Stoke On Trent, ST1 2ET United
Kingdom
MADE IN CHINA
Documents / Resources
|
ecowitt WH0298-C
Console
[pdf] User Manual
WH0298-C Console, WH0298-C, Console
---|---