Dr pen M8 Ultima Microneedling User Manual
- June 3, 2024
- Dr pen
Table of Contents
- Dr pen M8 Ultima Microneedling
- Parts Name
- How to operate
- Preparation
- Attention
- Adjustment of needle length
- Speed Display
- Speeds Adjustment
- Needle cartridge introduction
- Specification
- Packing List
- Precaution
- Warranty
- General maintenance
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Dr pen M8 Ultima Microneedling
Parts Name
How to operate
Wireless Model: Dr pen M8-W
The instrument used with both built-in battery or AC power
Wired Model: Dr pen M8-C
The instrument used with with AC power only
- Plug in DC adaptor to the jack
- Plug in DC adaptor to AC outlet
- To charge the battery:Plug the adapter into an outlet and connect it to the power interface
Preparation
- Take out needle cartridge in the sterilized packaging
- Fitting round slot 1 into 2 of machine, push needle cartridge horizontally up to the end.
- Lock the needle cartridge by turning it to the counterclockwise
- Turn the needle cartridge clockwise and then push out horizontally if you want to remove it.
- Start the Dr.pen M8
Press the power button for 2-3 seconds to start or shut down the device
Attention
In order to protect the instrument well, do not invert the instrument to prevent the liquid backflow
Adjustment of needle length
Adjust the depth of needle by turning the scale adjustment ring Turn it
clockwise, needle depth will be shorter Turn it counter clockwise, needle
depth will be longer
Speed Display
Speeds Adjustment
The pen starts from low to high speed The speed changes once each time you press the button
Needle cartridge introduction
Specification
Product name Auto-stamp Motorized Meso Machine Model name: Dr pen M8
- Adapter:
- 5V-1000mA
- Package Weight:
- 312g
- Package Size:
- 16912356mm
Packing List
Precaution
Warranty
The warranty period of Dr pen M8 is 6 months. We offer repair to our products from the day they are purchased. If any of our products has damages or natural trouble. We offer repair or replacements
General maintenance
- Make sure to inspect the device and adapter before use
- Keep it with its power off. Wipe its surface out with a dry cloth
- Keep it away from direct sunlight or high temperature and humidity
- Do not leave the measurement, repair or alter of the device to non-professional staff
- When you use the device which has not been used for a long time, make sure to check if it works properly with safety
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>