Dr pen M8 Auto Microneedle System User Manual

Dr pen M8 Auto Microneedle System

The Dr pen M8 is an auto-stamp motorized meso machine that comes in two models – the wireless model (Dr pen M8-W) and the wired model (Dr pen M8-C). The device is used for skin rejuvenation, skin tightening, fine wrinkles, and acne scars. Please read the manual thoroughly before use.

Product Parts Name

• Power Interface
• Speed Display Screen
• Power/Speed Button
• Scale Adjustment Ring
• Needle Cartridges

Product How to Operate

Wireless Model (Dr pen M8-W)

The instrument can be used with both built-in battery or AC power. To charge the battery:

1. Plug the DC adaptor to the jack.
2. Plug the DC adaptor to the AC outlet.
3. Plug the adapter into an outlet and connect it to the powerinterface to charge the battery.

The power indicator stays red while charging, and it turns green after charging is completed.

Wired Model (Dr pen M8-C)

The instrument can only be used with AC power. Plug the DC adaptor to the jack and plug it into an AC outlet.

Preparation

1. Take out the needle cartridge from the sterilized packaging.
2. Fitting round slot 1 into 2 of machine, push needle cartridge horizontally up to the end.
3. Lock the needle cartridge by turning it to the counterclockwise.
4. Turn the needle cartridge clockwise and then push outhorizontally if you want to remove it.
5. Press the power button for 2-3 seconds to start or shut down the device.

Attention: In order to protect the instrument well, do not invert the instrument to prevent liquid backflow.

Adjustment of Needle Length

Adjust the depth of the needle by turning the scale adjustment ring. Turn it clockwise to make the needle depth shorter andcounterclockwise to make it longer. The speed changes once each time you press the button.

Needle Cartridge Introduction

• 11 needles
• 16 needles
• 24 needles
• 36 needles
• 42 needles
• RNANO needles
• SNANO/3DNANO needles
• 5DNANO needles

Product Specification

• Product name: Auto-stamp Motorized Meso Machine
• Model name: Dr pen M8
• Adapter: 5V-1000mA
• Package Weight: 312g
• Package Size: 16912356mm

Product Packing List

• Hand Piece – 1 pc
• Adapter – 1 pc
• Manual – 1 pc
• Power Cable – 1 pc
• Needle Cartridge – 2 pcs

Precaution

• Alternating current Direct current Class I equipment
• Attention, consult accompanying documents Date of manufacture
• Serial No EU Representative CE mark Manufacturer Floating applied part

Product Warranty

The warranty period of Dr pen M8 is 6 months. We offer repair to our products from the day they are purchased. If any of our products has damages or natural trouble, we offer repair or replacements.

General Maintenance

• Make sure to inspect the device and adapter before use.
• Keep it with its power off. Wipe its surface out with a dry cloth.
• Keep it away from direct sunlight or high temperature and humidity.
• Do not leave the measurement, repair, or alter of the device to non-professional staff.
• When you use the device which has not been used for a long time, make sure to check if it works properly with safety.

Parts Name

How to operate

Wireless Model: Dr pen M8-W
The instrument used with both built-in battery or AC power

Wired Model: Dr pen M8-C
The instrument used with with AC power only

1. Plug in DC adaptor to the jack
2. Plug in DC adaptor to AC outlet
3. To charge the battery:Plug the adapter into an outlet and connect it to the power interface

Preparation

1. Take out needle cartridge in the sterilized packaging
2. Fitting round slot 1 into 2 of machine, push needle cartridge horizontally up to the end.
3. Lock the needle cartridge by turning it to the counterclockwise
4. Turn the needle cartridge clockwise and then push out horizontally if you want to remove it.
5. Start the Dr.pen M8

Press the power button for 2-3 seconds to start or shut down the device

Attention

In order to protect the instrument well,do not invert the instrument to prevent the liquid backflow

Adjustment of needle length
Adjust the depth of needle by turning the scale adjustment ring
Turn it clockwise,needle depth will be shorter Turn it counterclockwise,needle depth will be longer

Speed Display

Speeds Adjustment
The pen starts from low to high speed
The speed changes once each time you press the button

Needle cartridge introduction

Specification

Product name: Auto-stamp Motorized Meso Machine

• Model name: Dr pen M8
• Adapter: 5V-1000mA
• Package Weight: 312g
• Package Size: 16912356mm

Packing List

Precaution

Warranty

The warranty period of Dr pen M8 is 6 months. We offer repair to our products from the day they are purchased. If any of our products has damages or natural trouble. We offer repair or replacements

General maintenance

• Keep it with its power off.Wipe its surface out with a dry cloth
• Keep it away from direct sunlight or high temperature and humidity
• Do not leave the measurement , repair or alter of the device to non-professional staff Make sure to inspect the device and adapter before use
• When you use the device which has not been used for a long time, make sure to check if it works properly with safety

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>