Dr Pen Ultima M8 Microneedling Pen Professional Wireless Derma Auto Pen Kit User Manual
- June 9, 2024
- Dr pen
Table of Contents
Dr Pen Ultima M8 Microneedling Pen Professional Wireless Derma Auto Pen
Kit
Parts Name
How to operate
Wireless Model: Dr pen M8-W
The instrument used with both built-in battery or AC power
Wired Model: Dr pen M8-C
The instrument used with AC power only
- Plug in DC adaptor to the jack
- Plug in DC adaptor to AC outlet
- To charge the battery:Plug the adapter into an outlet and connect it to the power interface
Preparation
- Take out needle cartridge in the sterilized packaging
- Fitting round slot 1 into 2 of machine, push needle cartridge horizontally up to the end.
- Lock the needle cartridge by turning it to the counterclockwise
- Turn the needle cartridge clockwise and then push out horizontally if you want to remove it.
- Start the Dr.pen MB
Press the power button for 2-3 seconds to start or shut down the device
Attention
In order to protect the instrument well,do not invert the instrument to
prevent the liquid backflow
Adjustment of needle length
Adjust the depth of needle by turni ng the scale adjustment ring Turn it
clockwise.needle depth will be shorter Turn it counterclockwise,needle depth
will be longer
Speed Display
6 Speeds Adjustment
The pen starts from low to high speed The speed changes once each time you
press the button
Needle cartridge introduction
Specification
Product name:
Auto-stamp Motorized Meso Machine
- Model name : Dr pen MB
- Adapter : 5V-1000mA
- Package Weight : 312g
- Package Size : 16912356mm
Packing List
- Hand Piece 1 pc
- Adapter 1 pc
- Manual 1 pc
- Power Cable 1 pc
- Needle Cartridge 2 pcs
Warranty
The warranty period of Dr pen MS is 6 month s. We offer repair to our products from the day they are purchased. If any of our products has damages or natural trouble. We offer repair or replacements
General maintenance
Make sure to inspect the device and adapter before use Keep it with its power
off. Wipe its surface out with a dry cloth Keep it away from direct sunlight
or high tem perature and humidity Do not leave the measurement, repair or
alter of the device to non-professional st aff When you use the device which
has not been used for a long time, make sure to check if it works properly
with safety