Dr Pen M8 Ultima Microneedling Pen User Manual
- June 17, 2024
- Dr pen
Table of Contents
Dr Pen M8 Ultima Microneedling Pen
Parts Name
How to operate
Wireless Model: Dr pen M8-W
The instrument used with both built-in battery or AC power
Wired Model: Dr pen M8-C
The instrument used with with AC power only
- Plug in DC adaptor to the jack
- Plug in DC adaptor to AC outlet
- To charge the batlery:Plug the adapter into an outlet and connect it to the power interface
Charging Status
How to operate
Preparation
- Take out needle cartridge from the sterilized packaging
- Filling slot of cartridge into the pen correctly, push needle cartridge horizontally up to the end.
- Lock the needle cartridge by turning it to the counterclockwise
- Tum the needle cartridge clockwise and then pull out horizontally if you want to remove it. ( Fig1 J
- Start the device
Press the power button for 2-3 seconds to start or shut down the device.
Before assembling or disassembling the needle cartridge, make sure the LI- shaped point of the needle cartridge is aligned with the point of the hand piece
Attention
In order to protect the pen well, do not invert the instrument to prevent the
liquid backflow
How to operate
Adjustment of needle length
- Adjust the depth of needle by turning the scale adjustment ring. The depth of needle should be adjusted after start the pen.
- Tum it clockwise, needle depth will be shorter
- Tum it counterclockwise, needle depth will be longer
Speed Display
Speeds Adjustment
The pen starts from low to high speed
The speed changes once each lime you press the button
Needle cartridge introduction
Specification
Product name:
- Auto-stamp Motorized Meso Machine
- Model name: Dr pen MB
- Adapter: SV-1 000mA
- Package Weight: about 333g
- Package Size: 169″123″56mm
Packing List
Precaution
Warranty
The warranty period of device is 24 months .
We offer repair to our products from the day they are purchased. If any of our
products has damages or natural trouble. We offer repair or replacements
General maintenance
- Make sure to inspect the device and adapter before use
- Keep it with its power off. Wipe its surface out with a dry cloth
- Keep it away from direct sunlight or high temperature and humidity
- Do not leave the measurement, repair or alter of the device to non-professional staff
- When you use the device which has not been used for a long time, make sure to check if it works properly with safety