KWCC15 Wireless Charging Car Cradle
User Manual

Qi Certified
The certification program ensures this charger has passed rigorous tests to guarantee safety, compatibility, and energy efficiency.

Compatibility

Compatible with Qi-enabled devices* including

Features

• Place your phone in the cradle, the locking arms will automatically close and your phone will start wirelessly charging

• To remove it, simply press the button on the side and the locking arms will automatically open

• Supports 7.5W Apple wireless fast charging for iPhones with wireless charging#

• Supports 10W wireless fast charging for compatible devices such as the Samsung Galaxy Series and more#

• Supports 15W wireless fast charging for NextGen fast charging

• No need to remove your case. Works with most cases up to 3mm thick

• LED indicator to show charging status

• Full safety protection with Qi-certified temperature control, strict voltage regulation, and short circuit protection

• Includes vent mount and dash/window mount accessories

• Includes Quick Charge 3.0 USB car charger and 1m USB-A to USB-C charging cable

• Check with the device manufacturer for Qi wireless compatibility

  When connected to included Quick Charge 3.0 USB car charger

Specifications

• Wireless Standard: WPC/Qi (v1.2.4)
• Input: DC 5V/2A 9V/1.67A 12V/1.67A
• Wireless Output: 15W / 10W / 7.5W / 5W
• Charging Distance: 3 to 8mm
• Weight: 112g
• Certifications: Qi, RCM, RoHS, UN38.3

Wireless Charging Cradle Operation

• Choose either the air vent mount or the dash/window suction mount and attach the accessory to the cradle by snapping the ball into place and tightening the screw
• Using the included USB cable, connect the cradle to the Quick Charge 3.0 car charger or the vehicle’s built-in USB charger
• When power is received from the vehicle, the blue circle LED will pulse for 30 seconds to indicate the cradle is powered on
• Place your Qi-enabled wireless phone into the cradle
• The locking arms will automatically close and your phone will start wirelessly charging
• If your phone doesn’t start charging, adjust the movable bottom phone bracket to suit the size of your phone
• To remove your phone, press the button on the right side of the cradle and the locking arms will automatically open
  

Important Safety Instructions

• Only use original or reputable third-party chargers and cables
• Only use the product for the specified purpose of use
• Do not get wet to avoid causing short-circuit damage and leakage
• Do not use in extremely hot, humid, or corrosive environments to avoid short circuit damage and leakage
• Do not place too close to the magnetic strip or chip ID card to avoid magnetic failure
• Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant, etc.) to avoid potential interference
• Do not clean with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause damage to the charging dock
• Do not use the product if it is damaged or emits a suspicious odor
• Unplug the product from power sources when not in use
  Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a  normal operating condition and should not be cause for concern.

iPhone is a trademark of Apple inc.,
registered in the U.S. and other countries.
The ‘Qi’ Symbol is a trademark of the
Wireless Power Consortium.
www.comsol.com.au

References

• Comsol | Stay Connected

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>