Oppo Bluetooth Headphone and microphone Instruction Manual

Table of Contents

Bluetooth headphones and microphone
Instruction Manual
SM-2926

What’s included:
1 x Bluetooth Headphones
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
1 x 3.5mm Aux Cable

Tech Specifications:

Charging the Earbuds:
• Connect the provided USB cable to a regulated USB adapter. Connect the Micro-USB end of the cable to the charging port of the headphones(5).
• LED indicator will turn RED when charging, once fully charged LED will turn OFF.
Bluetooth Connection:
• Press and hold Multifunction Button(2) to turn ON the headphones, headphones will prompt, and the LED Indicator will flash RED and BLUE when in pairing mode.
• Turn on the Bluetooth function on a mobile device, Select the “Oppo Bluetooth Headphones” pairing name.
• Headphones will prompt and the LED will slowly flash BLUE if successfully paired.
• Headphones will automatically turn OFF after 5 minutes if not connected to Bluetooth.
Call Controls:
• When receiving a phone call, press the multifunction button to answer and press it again to end the call.
• Long press the multifunction button to reject a phone call.
• Double Press the multifunction button to redial the last number called.
Music Controls:
• Single press the Multifunction button to Play/ Pause audio.
• Short press Vol+/Next Track(3) to increase volume.
• Long press Vol+/Next Track(3) to skip to the next track.
• Short press Vol-/Previous Track(1) to decrease volume.
• Long press Vol-/Previous Track(1) to skip to the previous track.
Aux Connection:
• Connect the provided 3.5mm Aux cable to the 3.5mm Aux Input of the headphones and mobile device to play music directly.

• WARNING- When using this product, basic precautions should always be followed:

Read all the instructions before use.
Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
Do not expose the device to moisture.
Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
Do not expose the device to fire or excessive temperature.
To reduce the risk of injury, close supervision is required when the product is used near children.
Ensure that qualified service professionals use only identical replacement parts to ensure product safety

FCC Statement:
• This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

URL: www.iletech.com.cn
Date Created 2020/09/15
REV 1
MADE IN CHINA

| Oppo Bluetooth Headphone and microphone [pdf] Instruction Manual
A623RMZ, A623, RMZA623, Bluetooth headphones and microphone, Bluetooth Headphone
---|---