pTron InTunes Elite Wireless Neckband User Manual
- June 4, 2024
- pTron
Table of Contents
pTron InTunes Elite Wireless Neckband
Important: pTron InTunes Elite wireless neckband is set at 60% default volume. Please adjust the volume through this neckband or through your smart device.
Button Description:
Multi-Function Button (MFB)
Power On & Pairing:
- Power On the neckband by Pressing the MFB until Blue & Red LED light blinks alternatively.
- Long Press MFB until Blue & Red LED light blinks alternatively to Enter Pairing mode.
- Open Bluetooth function on your Device and Search for the Available Bluetooth devices.
- Click on ‘pTron BT’ to connect.
Note: MFB stands for Multi-function Button.
Power Off: Press MFB until Red LED light blinks & Turn Off.
Bluetooth Connectivity – Automatic: Just Turn On the Wireless Neckband.
It will Automatically Connect to the Last Connected Device.
Note: The last connected smart device must be On, Bluetooth function must
be On and must be within 10 meters wireless range from the neckband.
Instant Voice Assistant Activation: Long Press MFB for 2 seconds to Awake your Phone’s Voice Assistant.
Call & Music Functions:
- Answer/Hangup a Phone Call: Press MFB Once
- Reject a Phone Call: Press MFB for 2 seconds
- Music Play/Pause: Press MFB once
- Next Song: Long Press “-” button
- Previous Song: Long Press “+” button
- Volume Up: Press “+” button
- Volume Down: Press “-” button
- Re-dial: Press MFB Twice in Standby mode
Note: MFB stands for Multi-function Button.
Charging the Neckband:
- Turn Off the Neckband before Charging.
- Connect the Micro USB End of the Charging cable to the Neckband.
- Connect the USB end of the Charging cable to a Power Source such as USB Charger or other Charging Devices of 5V Output.
- Red LED light will be Steady during Charge. Once the Neckband is Fully Charged, Red LED indicator will Turn Off.
- Un-plug Both the Ends of the Charging cable.
Troubleshooting Scenario – Connectivity Issue:
- Turn OFF the neckband and charge 100%.
- Unpair with the connected Bluetooth device.
- Restart the Bluetooth device.
- After 100% charging switch ON the neckband and pair it with the Bluetooth device again.
Warranty
Manufacturing defects in materials and workmanship of the product ONLY. This
warranty applies when the product is used under normal conditions and the
purpose for which the product was designed.
Disclaimer
The colors and specifications shown/mentioned in the user manual may differ
from the actual product. The images shown are for representation purposes
only. Other product logos and company names mentioned herein may be trademarks
or trade names of their respective owners.