XPOtool 30263 Caravan Dolly Trailer Dolly User Manual
- June 4, 2024
- XPOtool
Table of Contents
XPOtool 30263 Caravan Dolly Trailer Dolly
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Description
- This little caravan dolly is a useful tool for owners of a little caravan. It will assist you in moving small-weight caravans safely over small distances. It can also be used to manoeuvre the cara-van in narrow zones.
- The dolly is very easy to assemble. Refer to the list of components and the exploded view for assembly. Make sure that all parts depicted are included in the scope of delivery.
Safety instructions
- Before commissioning the device, read the user’s manual entirely, making sure to understand everything.
- The caravan dolly has been designed for a maximum capacity of 27 kg.
- While hitching, un-hitching, and moving the caravan, stay out of the danger area; children must keep an extra safety distance.
- Make sure that the load of the caravan is secured when manoeuvring.
- Make sure that the drawbar is safely attached to the hitch before moving the caravan.
- Avoid uncontrolled moving of the dolly. On sloping ground, the dolly is difficult to adjust.
- Ensure extra-good locking if the caravan that the dolly is hitched to has not been moved over a long period.
- Keep the dolly clean. Before every use, check the dolly for proper operation and regularly lubri-cate the moving components.
Parts list
Main components
Letter | Name | Letter | Name |
---|---|---|---|
A | Handle | F | Stand |
B | Axle | G | Tyre |
C | Bracket | H | Washer |
D | Support bar | I | Cotter pin |
E | Hitch | J | Rubber handle |
Screwing pieces
№ | Name | Qty. | № | Name | Qty. |
---|---|---|---|---|---|
1 | Screw M10×50 | 3 | 6 | Circlip | 1 |
2 | Nut M10 | 5 | 7 | Screw M18×40 | 1 |
3 | Circlip | 5 | 8 | Circlip | 1 |
4 | Screw M12×30 | 1 | 9 | Washer | 1 |
5 | Nut M12 | 1 | 10 | Screw M10×20 | 2 |
Assembly and explosion view
Technical specifications
The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-ual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to:
- service@wiltec.info
- or use our contact form:
- https://www.wiltec.de/contacts/
- The most recent version of this manual in several languages can be found in our online shop:
- https://www.wiltec.de/docsearch
- Our postal address is:
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler Germany
- To return your goods for exchange, repair, or other purposes, please use the following address. Atten-tion! To allow for a trouble-free complaint or return, it is important to
- contact our customer service team before returning your goods.
- Retourenabteilung
- WilTec Wildanger Technik GmbH
- Königsbenden 28
- 52249 Eschweiler Germany
- E-mail: service@wiltec.info
- Tel: +49 2403 55592–0
- Fax: +49 2403 55592–15