SIEMENS FS-RD-SB/-R Surface Mounting Box Instruction Manual
- June 9, 2024
- SIEMENS
Table of Contents
INSTALLATION INSTRUCTIONS
Model FS-RD-SB/-R
SURFACE BOX
(For indoor use only in dry environment)
FS-RD-SB/-R Surface Mounting Box
The FS-RD-SB/-R surface box is primarily used for surface mounting remote annunciator units (such as FS-RD-2, etc.). The FS-RD-SB is black and the FS- RD-SB-R is red.
PARTS SUPPLIED
1 FS-RD-SB/-R Surface box
1 Installation Instruction
FS-RD-SB/-R
DIMENSIONS
Step 1.) Installation is to be done by qualified personnel who have thoroughly
read and understood this instruction sheet.
Step 2.) Disconnect BATTERY and AC prior to working on equipment.
Step 3.) Use proper screw size (not supplied) to secure surface box to a
clean, dry, shock-free and vibration-free surface. Consider the following when
mounting the box:
- Mounting height for visual and manual access consideration.
- Weight and size of the unit that will use the surface box.
- Local mounting codes.
Step 4.) Follow the installation instructions of the unit that will use the
FS-RD-SB/-R surface box.
Caution: When installing the FS-RD-SB/-R surface box, route field wiring
away from sharp projections, corners and internal components of the unit
installed.
Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
P/N 315-099639-2
firealarmresources.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>