HAMPTON BAY 65163 Wall Sconce User Guide

: June 3, 2024
: HAMPTON BAY

HAMPTON BAY 65163 Wall Sconce

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

Review these basic electrical guidelines before you begin this installation.

Use tools with insulated handles and ladders made of wood or fiberglass.
Keep dry chemical fire extinguishers in the kitchen basement and workshop.
Never disable grounding devices. Ensure all appliances that require grounding are properly grounded.
Meet or exceed all electrical code requirements that cover the work you are doing.
Always work with enough light to see what you are doing. It is easy to make a mistake when you work in dim light.
When in doubt about the safety of any electrical repair or test, call in a professional.

WARNING : Before touching any wire, use a voltage tester to ensure it is not live.

WARNING : When you check for voltage in a receptacle, check both outlets as each may be controlled by a separate wiring circuit.

WARNING : Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls the circuit.

WARNING : When replacing fuses, turn off the main power first Make sure your hands and feet are dry and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch a plug fuse only by its insulated rim. Remove cartridge fuses with a fuse impeller.

WARNING : Consult a qualified electrician to ensure correct branch circuit conductor.

CAUTION : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warranty

3-YEAR LIMITED WARRANTY

The manufacturer warrants this lighting fixture against defects in materials and workmanship for a period of three years from the date of purchase. If within this period the product is found to be defective in material or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price to the original purchaser or consumer. This warranty does not cover light bulbs or the fixture becoming damaged due to misuse, accidental damage, improper handling and/or installation, and specially excludes liability for direct, incidental, or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, so the above exclusions and limitations may not apply. This warranty gives you specific rights and you may also have other rights that vary from state to state.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

Pre-Installation

PLANNING INSTALLATION

Compare all parts with the Hardware Included and Package Contents sections. If any part appears missing or damaged, do not install this product and contact the Customer Service team at 1-855-HD-HAMPTON.

TOOLS REQUIRED

Safety goggles
Phillips screwdriver
Electrical tape
Wire stripper

HARDWARE INCLUDED

NOTE : Hardware not shown to actual size.

Part	Description	Quantity
AA	Crossbar	1
BB	Outlet box screw	2
CC	Mounting screw	2
DD	Wire connector	3
EE	Decorative nut	2
FF	Washer	2

PACKAGE CONTENTS

Part	Description	Quantity
A	Canopy with socket	1
B	Shade	1
C	Socket ring	1
D	Decorative accent	1

Installation

Installing the crossbar

Make sure the power is off.
Pull the supply wires out of the outlet box.
Install the mounting screws (CC) on the mounting crossbar (AA) so they protrude.
Fasten the crossbar (AA) to the outlet box with the outlet box screws (BB).

Making the electrical connections

Connect the negative wire (white) from the fixture to the negative wire from the outlet box, the positive wires (black) from the fixture to the positive wires from the outlet box, and the ground wire (bare) from the fixture to the ground wire from the outlet box.
Secure all connections together with the wire connectors (DD) and wrap electrical tape (not included) around the wire connectors (DD).
Push all excess wire and wire connections back into the outlet box.

Attaching the canopy

Place the canopy (A) over the mounting cross bar (AA).
Align the mounting holes on the canopy (A) to the mounting screws (CC).
Secure the canopy (A) to the mounting screws (CC) using the decorative nuts (EE).

Attaching the decorative accent

Secure the decorative accent (D) to the canopy with the socket (A).

CAUTION : Caulk completely around the area where canopy meets the wall surface with silicone caulking compound to prevent water from seeping into the outlet box.

Installing the shade and light bulb

Secure the shade (B) to the decorative accent (D) using the socket ring (C).
Install a medium base, 60 Watt maximum, light bulb (1) (not provided) into the socket.

Care and Cleaning

WARNING : Before cleaning the fixture, disconnect the electrical power to the fixture by turning off the circuit breaker or removing the fuse at the fuse box.

Use a dry or damp, clean cloth to wipe the surface of the fixture. Do not use abrasive cleaners or chemical solvents.
Allow the fixture to dry completely before power is restored.

Troubleshooting

Problem	Problem	Solution
The light will not illuminate.	The power is off.	Ensure the power supply is

on.
There is a faulty wire connection.| electrician if you are not comfortable troubleshooting wiring issues.
There is a faulty switch.| Test or replace the switch.
The bulb is burned out.| Replace the bulb.
The fuse blows or the circuit breaker trips when the light is illuminated.| There are crossed wires, or the power wire is not properly grounded.| Check the wire connections.

HAMPTONBAY.COM