ULTRA HD LX5501 Wireless Bluetooth Projector User Manual

ULTRA HD LX5501 Wireless Bluetooth Projector

Quick Operation Manual

• It is applicable only tosafe areas with an altitude below 2000m
• Only suitable for use in non-tropical climate conditions

Notice

• Do not open the case
• Do not get wet
• Wipe with clean cloth
• No chemical cleaning
• Do not cover the lens
• Do not look directly into the lens
• Disconnect power when not in use

Product Features

• The best projection screen range of this projector is 60-100 inches, allowing you to indulge in different audio and video horizons It has native Android system built in. You can also play local videos via USB.
• This projector can play clear pictures and videos in a bright environment. With speaker built in, if you need a larger volume output, you can connect to an external audio system through the 3.5MM interface.

Product List

Product functional structure diagram

1. 3.5mm Audio output

2. HD output

3. USB 1

4. USB 2

5. Preset interface

6. Intrared remote control receiving window

7. The power interface

8. Tripod fixed screw hole

9. MATS

10. Air intake (do not block)

Remote control button function

1. The power button
2. The mute button
3. The back button
4. The pause button
5. The fast forward button
6. The direction key
7. Determine the key
8. The return key
9. Menu function keys
10. The home page button
11. The volume reduction
12. The volume

On-off operation

When switching on the power, please connect the inputend of the power cord to the projector first, and then connect the AC end of the power cord to the power socket.
When the projector is connected to the power supply, the projector enters the standby state:

• Start up: press the power button of the body, or the power button on the remote control, and the projector will start to work.
• Power off: press the power button on the body, or the power button on the remote control, and the projector will shut down.

The low

The image is blurred after power-on. Please rotate the focal circle to clear the image.

Image focusing
Place the projector lens perpendicular to the projection screen or curtain wall, rotate the lens to adjust until the image is clear, that is, to complete the image focusing.During the focUsing prooess, you can play the program or bring up the menu image of the product to match the focusing adjustment.

Set up

Set submenu functions

Network Settings:
Find the network/automatically obtain the IP address/Manually set the IP address/Disconnect the

NetworkProjection Settings:
Projection mode: desktop projection/desktop projection/lifting projection/lifting

projectionAdvanced Settings:
Language/boot channel/sleep time/Local upgrade/Online upgrade/Factory restore

WiFi connection

1. Select Settings and press the OK key.
2. Select Network Settings, press Down to select Wireless, and then press OK.Click ok and select “Find Network”. The available WiFi list appears on the right. PressClick OK to confirm the WIFi to be connected. Enter the virtual keyboard on the screenWiFi password.
3. After entering the password, press the “Back button” on the remote control, and then click OK to connect.

Multimedia playback

1. Insert the USB flash drive into the USB port of the projector
2. Select Media Center and press the OK key.
3. Select a file to play.

FCC warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

The product is suitable for areas with an altitude of less than 200m in non- tropical climates, and the operating temperature is 25 degrees Celsius. Do not disassemble or repair the machine Please use the specified power plug to avoid damage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>