Outsunny 862-072V00 Multi Position PE Rattan Sun Lounger Instruction Manual
- August 24, 2024
- Outsunny
Table of Contents
Outsunny 862-072V00 Multi Position PE Rattan Sun Lounger
IMPORTANT
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.
Our contact details are below
Country UK
Phone 0044-800-240-4004
An Email enquiries@mhstar.co.uk
IMPORTANT
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only for domestic use
Use tips
- Put the chair stably on a flat floor.
- Mount the garden chairs in the shelter of the weather.
- Stay away from open flames.
- Don’t hang anything in the structure.
- Avoid the overload at the anchors/structure.
- It is advised that don’t stay on the chairs when there is a storm.
- Do not use in adverse weather conditions and cover furniture when not in use.
Precautions before assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly remove leaves and/or water collected on the canvas.
- Check the chair regularly.
Storage conditions
- The fabric should be stored completely dry, and in a clean and dry place to avoid the risks of mold.
- Don’t use this product if the seat cloths, cloth cushions,s or tarpaulins are aging, and contact our customer service.
- Caution with the risks of pinching or cuts during assembly.
- The manufacturer declines all responsibility in case of damages due to a bad installation or due to weather.
Operation Instructions
Please confirm that all components are present before beginning assembly. For
the protection of your furniture, place all parts on a clean and smooth
surface to prevent any damage.
- Please assemble the furniture by 2 persons or more.
- Do not confuse similar screws.
- Do not tighten bolts fully until all parts are connected!
- Please periodically check all fittings and re-tighten as necessary.
PARTS
HARDWARE
Installation
US_ IMPORTER
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>