VITCROLA VPB-400 Portable Bluetooth Speaker Instruction Manual

VITCROLA VPB-400 Portable Bluetooth Speaker

OVERVIEW

1. LED Indicator
2. Charger Button
3. Wireless Charging Pad
4. Multi-Function Button
5. Power Button
6. Bluetooth Button
7. Volume Up
8. Volume Down

• Power On / Off ………………………………………………. Long Press (1 sec) \!) button
• Volume Up ………………………………………………………………………… Press+ button
• Volume Down ……………………………………………………………………. Press – button
• Play/Pause …………………………………………………………….. Single Press O button
• Next Track ……………………………………………………………. Double Press O button
• Previous Track …………………………………………………………. Triple Press O button
• Enter MP3 USB Mode ………………………………. Press and hold (5 sec) 0 button
• Bluetooth Mode ……………………………………………………… Single Press* button
• AUX Mode …………………………………………….. Single Press* button again
• Pair a Device …………………………………………………. Long Press (1 sec) * button
• Disconnect Bluetooth Device ……………………. Press and hold (5 sec)* button
• Check Charging Status …………………………………………………….. Press 7 button
• Wireless Charging On/Off ………………………………. Long Press (1 sec) 7 button
• Factory Reset …………………………………………. Press and hold O button (10 sec)

BLUETOOTH PAIRING

Press the* button to begin Bluetooth Pairing. (Flashing Blue light)
Wait for the “Victrola ME2″ to appear on your available devices list of your external device and press 11Victrola ME2”
Once paired, the ME2 will play a paired chime and the light will turn solid Blue for 2 seconds

AUX-IN

To enter AUX-IN Mode, Press the* button to cycle between AUX and Bluetooth Modes. AUX Mode will have a Yellow LED.
Plug an Auxiliary Cord (not included) from your ME2 to your external device to begin playback.
NOTE: If an AUX-IN cord is inserted while in Bluetooth mode, AUX-IN will override the Bluetooth function.

USB- C MP3 PLAYBACK

Long Press the O Button until the LED flashes Orange, then turns solid Orange.
The unit is now in USB MP3 Playback mode. Use the O button to play, pause and skip MP3 files from a connected USB-C Flash drive (See Overview Controls) (USB-C Flash drive not included).

DUAL SPEAKER PAIRING

Press the and O button simultaneously for 1 second on BOTH speakers to enter Dual Speaker Pairing Mode (Flashing Purple light)
PAIRING COMPLETE: Chime and solid purple LED indicate speakers are connected (speakers always connect in MONO mode) MONO/STEREO CHANNEL SWITCHING: After Dual Speaker Pairing is connected, press the and O button on illl::I..E8 speaker to switch between MONO and STEREO pairing mode
STEREO MODE -The right channel will flash purple 3 times quickly
MONO MODE – Both units will be solid purple for 2 seconds  TO DISCONNECT: Press and hold and O button on EITHER speaker for 5 seconds to disconnect dual-speaker pairing
PLEASE NOTE:

• If BOTH devices are in Dual Speaker Pairing Mode and do not connect, try placing speakers closer together.
• Dual Speaker Pairing only works with another Victrola Music Edition 2 speaker.

WIRELESS CHARGING

Wireless charging pad is ALWAYS ON when unit is plugged in to power, whether unit is turned on or not.
WIRELESS CHARGER (ON BATTERY POWER): Charger is OFF by default when on battery power
TURN WIRELESS CHARGING ON & OFF Long press the 4 button (1 Second)
WIRELESS CHARGER ON/OFF STATUS Single Press the 4 button
If LED flashes, charger is ON, if LED does not flash, charger is OFF
Wireless charger automatically turns OFF after 5 minutes if no phone is charging.

BATTERY STATUS

CHECK BATTERY LEVEL
Single press button when unit is powered on to view battery level

• LED Indicator Color Battery Level
• Green ……………………………………………………………………….. 50-100%
• Orange ……………………………………………………………………….. 26-49%
• Red ………………………………………………………………………….. 10%-25%
• Flashing Red …………………………………………………………………. < 10%
• Flashing White …………………………………………………………… Charging
• OFF (while plugged in) ………………………………………… Fully Charged

SPECIFICATIONS

GENERAL

• Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.35kg
• Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cp90mm+cp52mm
• Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . 55Hz-20KHz
• Battery working time . . . .•. . . . . . . . . .•.•.•. . . . . 20 hours (varies by audio content and volume level)
• Charging time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 hours
• Charging port type . . . . . . . . . . . . . . . . . . . . . . . . . . . USB-C
• Battery type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable Li-ion
• Battery (7.4V / 4400mAh)

BLUETOOTH

• Bluetooth Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bluetooth V5.0
• Bluetooth Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2DP V1 .3, AVRCP V1 .6
• Bluetooth Frequency Range . . . . . . . . . . . . . . . . . . . 2402-2480MHz
• Bluetooth Transmitting Power . . . . . . . . . . . . . . . . . . 3.95dBm
• Bluetooth Transmitting Modulator . . . . . . . . . . . . . . GFSK, rr/4DQPSK, BDPSK

WIRELESS POWER CONSORTIUM

• Operation Frequency . . . . . . . . . . . . . . . . .•.•. . . . . 111.8kHz to 145.2kHz

INCLUDED:
ME2 Speaker, Manual, Power Adaptor, USB-C Charging Cable Design and specification are subject to change without notice
Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners Designed in Denver, Colorado I Made in China

Warranty

Victrola is a registered trademark of Innovative Technology Electronics, LLC.

United States
Victrola (Innovative Technology Electronics, LLC) warrants to the original retail purchaser that this product will be free from defective materials and workmanship for one (1) year from the date of purchase, subject to the limitations below. This warranty period is not extended if we replace the product.
To obtain a replacement under the terms of this warranty, you must contact the dealer from which it was purchased with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at
victrola.com/contact.
Except as limited below, if the product proves defective in either material or workmanship within one (1) year from the date of purchase, Victrola will replace the product at no charge. If the product model is no longer available and cannot be replaced with an identical model, Victrola will issue a merchandise credit for the purchase price to be redeemed at victrola.com.

FCC REGULATORY COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to  which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Get equipement est conforme aux limites d’exposition aux radiations definies par le Canada pour des environnements non contriiles. Get equipement doit etre installe et utilise avec une distance minimale de 20 cm entre le radiateur et votre corps. Get emetteur ne doit pas etre installs au meme endroit ni utilise avec une autre antenna ou un autre emetteur.

ISED REGULATORY COMPLIANCE
This device contains licence-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISED RADIATION EXPOSURE STATEMENT
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Get equipement est conforme aux limites d’exposition aux radiations IC CNR-102 etablies pour un environnement non controls. Get equipement doit etre installe et utilise avec une distance minimale de 20 cm entre le radiateur et votre corps. Get emetteur ne doit pas etre colocalise ou fonctionner en conjonction avec une autre antenna ou un autre emetteur. HVIN: VPB400

Limitations:

• This limited warranty does not cover failure of the product arising, in whole or in part, from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with Victrola’s instructions.
• This limited warranty terminates if the original retail purchaser sells o otherwise transfers this product.
• This limited warranty is null and void for defects or damage caused by installation or repair performed by any person or entity other than a Victrola authorized installer or dealer.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, jurisdiction to jurisdiction or country to country. All express and implied warranties for the product, including but not limited to any implied warranties of merchantability and fitness for a particular purpose, are limited in time to the term of this warranty. Some states, jurisdictions or countries do not allow the exclusion of certain implied warranties or conditions, or limitations on how long an implied warranty or condition lasts, so this limitation may not apply to you. Victrola’s responsibility for malfunctions and defects in hardware is limited to replacement or repair as set forth in this warranty statement. Victrola does not accept liability for special, punitive, consequential or incidental damages or losses, whether direct or indirect, including without limitation, any liability for third party claims against you for damages or losses or for products not being available for use. The maximum liability for which Victrola may be responsible will be no more than the amount you paid for the product that is the subject of the claim. Some states, jurisdictions or countries do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Canada and US Territories
The Warranty on this product shall comply with applicable law when sold to a consumer in Canada or a US Territory. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at
victrola.com/contact. If this product proves defective in either material or workmanship, Victrola will replace the product at no charge. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, Victrola at its sole option may replace the unit with a current model of equal or greater value.
Outside the U.S, Canada, and US Territories
The Warranty on this product shall comply with applicable law when sold to a consumer outside of the United States, Canada, and US Territories. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>