BZBGEAR BG-ND Series Live Streaming Camera User Guide
- June 6, 2024
- BZBGEAR
Table of Contents
Quick Start Guide
**BG-ND Series
**
The BG-ND series cameras combine top-of-the-line 1080P@60Hz pictures and
compatibility with the widest range of video software and hardware. Advanced
onboard video processing provides vivid, accurate imaging. 20x and 30x zoom
options allow close-ups from a distance. The implementation of the NDI|HX
protocol allows for the easy distribution of your IP stream to multiple
devices and platforms simultaneously without massive bandwidth requirements.
NDI|HX provides low latency, support for multi-GPU acceleration, support for
the most advanced compression formats currently available, and the ability to
operate over a wireless network. There has never been a simpler way to connect
video equipment together. New devices are automatically discovered and made
available to all other systems on the network. Removing the need for running
bulky cables makes video production, streaming, and conferencing applications
easy to deploy, manage, and scale. BZBGEAR’s line of NDI cameras delivers
everything you need to easily create a professional quality broadcast.
Package Contents
1 x BG-ND
1 x 12V/1.5A Power Supply
1 x User Manual| 1 x RS232 Control Cable
1 x IR Remote Control
---|---
- Camera Lens
- Camera Base
- Remote Controller Receiver Light
- Bottom Dial Switch
- Tripod Screw Hole
- RS232 Control Interface (input)
- RS232 Control Interface (output)
- RS485 Input (left +, right-)
- Audio Input Interface
- 3G-SDI interface
- HDMI Interface
- 10/100M NDI/LAN Network Interface
- DC12V Input Power Supply Socket
Mounting Instructions
-
Wall mount guide
-
Ceiling mount guide
RS-232 Interface
-
RS-232C interface specification as shown below
-
RS-232 Mini-DIN 8-pin Definition
NO.| Port|
Definition
---|---|---
1
|
DTR
|
Data Terminal Ready
2
|
DSR
|
Data Set Ready
3
|
TXD
|
Transmit Data
4
| GND|
System Ground
5
|
RXD
|
Receive Data
6
|
GND
|
System Ground
7
| IR OUT|
IR Commander Signal
8
| NC|
No Connection
WebGUI
The BG-ND camera includes a built-in WebGUI allowing for control and management of advanced features. Use the following instructions to access the WebGUI.
- Launch a web browser and enter the IP address of the unit (default 192.168.5.163).
- The BZBGEAR login page will appear.
- Enter your login information (by default Username = admin Password = admin).
- Select the Login button.
Problems connecting to your camera?
Check out our Knowledge Base at https://bzbgear.com/knowledge-base/ for more
information and a step-by-step guide. https://bzbgear.com/support/
My camera has no picture| Power is off, bad connection, incompatible
resolution, the camera lens is obstructed| • Check the power connection on the
back of the camera
• Check connections/replace cables with new ones
• Use IR remote or WebGUI to change to a resolution that is compatible with
your display
• Check computer and program settings to ensure USB is discovered
---|---|---
My IR remote control doesn’t work| The camera’s IR sensor is blocked,
batteries are dead, sunlight is interfering with the IR signal| • Ensure you
have a clear line of sight from the remote to the front of the camera base
• Replace the batteries
• Ensure the camera is out of direct sunlight
I cannot access the camera’s WebGUI| The camera is not connected to the
network| • Check connections
• Verify your camera’s IP address using an IP scanning tool
• Ensure your computer is connected to the same network as the camera
https://bzbgear.com/support/ | 1.888.499.9906 | support@bzbgear.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>