Knightsbridge CAMFIX01 Plug and Play SmartKnight Indoor 2MP Camera User Guide

: June 4, 2024
: Knightsbridge

Table of Contents

Setting up Voice Assistants
WI-FI CONTROL
GENERAL
WARRANTY
Documents / Resources

Knightsbridge CAMFIX01 Plug and Play SmartKnight Indoor 2MP Camera User Guide

Download the SmartKnight App
On Google Play (AndroidTM) or App Store® (Apple®).
Open the app, tap “Register” and follow the on-screen instructions

Add Device (2.4 Ghz only)
To add a device tap the “+” on top right corner, select the product category and follow the on-screen instructions

Enjoy
Enjoy your connected product. For more in-depth instructions, please see section titled “Wi-Fi Control” in this leaflet

Setting up Voice Assistants

Enable the “SmartKnight” skill in either voice assistant and follow the app instructions to control your device(s) with your voice.
Visit http://www.mlaccessories.co.uk for further assistance

WI-FI CONTROL

Download the SmartKnight app on Google Play or the App Store®
Once the app is downloaded, open the app and tap “Register” then follow the on-screen instructions
To add a camera to the app, switch the camera on and tap “+” on the top right corner
Select the “Sensor & security” category and then select “Smart Camera”
Follow the on-screen instructions
Connect to the desired Wi-Fi network, tap “Confirm” and the app will start searching for devices. Please note only 2.4 GHz networks are supported and make sure your device is connected to the same Wi-Fi network
After the camera has been added successfully to the app, it can be named and added to a room. After naming the it, tap “Done”

WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed.

GENERAL

This product should be recycled in the correct manner when it reaches the end of its life.
Check local authorities for where suitable facilities exist.

WARRANTY

This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice.

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Android and Google Play are trademarks of Google LLC.

INTERNATIONAL CONTACT DETAIL

Documents / Resources

| Knightsbridge CAMFIX01 Plug and Play SmartKnight Indoor 2MP Camera [pdf] User Guide
CAMFIX01, Plug and Play SmartKnight Indoor 2MP Camera, CAMFIX01 Plug and Play SmartKnight Indoor 2MP Camera
---|---