Outsunny 812V80MX Tree Light Instruction Manual
- September 21, 2024
- Outsunny
Table of Contents
830-812V80MX
830-812V81MX
IN231200009V01_GL
830-812V80_830-812V81_830-812V82
830-812V83
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed
including the following:
a) “READ AND FOLLOW ALL SAFETY INSTRUCTIONS.”
b) “Do not use these products outdoors unless marked suitable for indoor and
outdoor use. When products are used in outdoor applications, connect the
product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installation.”
c) “Do not mount or place near gas or electric heaters, fireplaces, candles or
other similar sources of heat.”
d) “Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.” For light sets employing medium screw lamps, this
statement shall include : “Install only using the mounting means provided”.
e) “Do not let lamps rest on the supply cord or on any wire.”
f) “Do not use this product for other than its intended use.”
g) “Do not hang objects from cord, wire, or light string.”
h) “Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.”
i) “Do not cover the product with cloth, paper or any material not part of the
product when in use.”
j) Keep lamps away from any combustible surface.
k) “Read and follow all instructions that are on the product or provided with
the product.”
“SAVE THESE INSTRUCTIONS”
CAUTION: To reduce the risk of fire and electric shock:
a) Do not install on trees having needles, leaves or branch coverings of metal
or materials which look like metal; and
b) Do not mount or support wires in a manner that can cut or damage wire
insulation.
c) When the product is placed on a live tree, the tree should be well
maintained and fresh. Do not place on live trees in which the needles are
brown or break off easily. Keep the live tree holder filled with water.
5FT/6FT Tree Light
Step1: Place the trunk on the base and tighten the screws.
Step2: Put the leaves and trunk together and tighten the screws and
plugs.
Step3: Hang the coconut on the tree, then tighten the plug between the
coconut and the trunk.
Step4: Tighten the plug and transformer and plug them into the socket.
Tips: Note the direction of the plug, as shown in the picture on the left.
If placing the tree outside, insert ground nails into the base, as shown on
the left.
| Input voltage | 120 | V |
|---|---|---|
| Input AC frequency | 60 | Hz |
| Output voltage | 3.5 | V |
| Output current | 0.1 | A |
| Output power | 4.5 | W |
| Average active efficiency | 70 | % |
| Efficiency at low load (10 %) | ||
| No-load power consumption | 0.102 | W |
- Control Button: Press button to change between 9 different modes
- To set and reset time, press button for 3 seconds. Green light ON means timer is ON(6H ON/18H OFF)
7FT/8FT Tree Light
Step1: Place the trunk on the base and tighten the screws.
Step2: Put the two tree trunks together and tighten the screws and plugs.
Step3: Put the leaves and trunk together and tighten the screws and
plugs.
Step4: Hang the coconut on the tree, then tighten the plug between the
coconut and the trunk.
Step5: Tighten the plug and transformer and plug them into the socket.
Tips: Note the direction of the plug, as shown in the picture on the left.
If placing the tree outside, insert ground nails into the base, as shown on
the left.
| Input voltage | 120 | V |
|---|---|---|
| Input AC frequency | 60 | Hz |
| Output voltage | 3.5 | V |
| Output current | 0.1 | A |
| Output power | 4.5 | W |
| Average active efficiency | 70 | % |
| Efficiency at low load (10 %) | ||
| No-load power consumption | 0.102 | W |
- Control Button: Press button to change between 9 different modes
- To set and reset time, press button for 3 seconds. Green light ON means timer is ON(6H ON/18H OFF)
Smart Remote Control
Select your favorite light modes by either the remote or the controller If you
have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
If you have any questions, please contact our customer care center,
Our contact details are below:
416-792-6088
customerservice@aosom.ca
Imported by Aosom Canada Inc. 7270 Woodbine
Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
MADE IN CHINA
If you have any questions, please contact our customer care center.
Our contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>