SpinBot Semiconductor Mobile Phone Cooler for Gaming User Guide
- June 5, 2024
- SpinBot
Table of Contents
SpinBot Semiconductor Mobile Phone Cooler
**for Gaming User Guide**
How to Use :
Step 1: Stretch the clip down and put the phone inside. (The back of the phone
should touch the cooling surface of the cooler) (Fig.A)
(Fig.A)
Step 2: Plug the type-C connecter of the included USB cable into the power
port of the cooler and another connector of the USB cable to any power source
like powerbank, wall charger, etc.
Step 3: Press the power button for 3s to turn the cooler ON.
Step 4: Press the power button for 3s to turn the cooler OFF.
Technical Specification
Suitable for mobile phones with width 65-84mm
Inside the box:
– Mobile Cooler
– Braided Type-C USB cable (1Meter)
– User Manual
Important
– When the weather is humid, there will be condensed water droplets on the cooling surface of the cooler. You are advised to wipe these with a cloth after regular intervals.
– It is strictly advised not to obstruct the fan behind the ventilation grid. This might result in the burning of the fan or a drop in cooling efficiency.