ring B0776ZCMMR Spotlight Cam User Guide

ring B0776ZCMMR Spotlight Cam User Guide

Specifications

• DIMENSIONS : 4.96 x 2.72 x 2.99 inches
• CAPTURE RESOLUTION: 1080P HD
• HORIZONTAL FIELD OF VIEW: 140 degrees
• VERTICAL FIELD OF VIEW: 78 degrees
• CONNECTIVITY: 11 b/g/n Wi-Fi connection, 2.4 GHz
• BRAND: Ring

The Ring Spotlight Security Camera allows you to control the security of our house 24/7. It provides 1080HD video quality with live view, motion-activated alerts, two ways talk, and a remote-activated siren. This security camera is easy to install and has advanced motion detection which allows you to find the ideal setting for your home by adjusting your motion zones.

The Ring security camera has multiple powering options, you can use a solar panel to continuously charge the camera. The app linked to the Ring security camera can be used to access a number of features with a convenient dashboard. You can add or remove authorized client devices, shared users, and select linked accounts. The security camera also works with Alexa.

Quick Start

1. Open the Ring app and select Set Up a Device. Then follow the in-app instructions.
2. Scan this code. This identifies your Ring device to make setup fast and easy.

**Plug it in

**

First, fully charge the battery by plugging it into a power source using the provided USB cable. The small light on top will glow green once fully charged.

**Insert the battery

**

After charging, insert the battery in your Spotlight Cam until it clicks into place. Then, click the door closed.

**Download the Ring app

**

The Ring app walks you through setting up and managing your Spotlight Cam. Search for “Ring” in one of the app stores below, or visit ring.com/app

Set up your Spotlight Cam in the Ring app.

• Set up your Spotlight Cam near your router.
• In the Ring app, select Set Up a Device.
• When prompted, select Security Cams and follow the in-app instructions.

Try it out!

After setup, tap the Live View button in the Ring app to see live video from your Spotlight Cam.

White light flashing?

If the light on the bottom of your Spotlight Cam is flashing after setup, it’s updating its software. Do not remove the battery from your Spotlight Cam while the light is flashing!

Test video quality outside

Now, take your Spotlight Cam outside, near the place where you want to install it. Test video quality again.

• Does everything look good?  Continue to the next section.
• Something not, right?  Jump ahead to the troubleshooting section.

How to remove the mounting plate

Included installation hardware\

Screwdriver
Use to secure the star-shaped security screw on the mounting plate.

Mounting Bracket
Attach this to the wall first, then slot Spotlight Cam into the socket.

Install Screws
Use these to secure the mounting bracket to your wall.

Wall Anchors
Use these to attach the mounting bracket to your wall if installed on a hard surface, such as stucco or brick.

**If installing on a wall

**

Before installing Spotlight Cam on a wall, insert the mounting plate with the ball socket pointing down.

If installing on an eave

Before installing Spotlight Cam on an eave or overhang, insert the mounting plate with the ball socket pointing up.\

Choose your install height

When mounted at 9 feet off the ground, with the motion detector parallel to the ground, the motion sensor is optimized to detect human-sized objects at up to 30 feet.

Install the mounting bracket

• First, mark your holes using the mounting bracket as a guide.
• If installing on a masonry surface, first drill holes using a 1/4” drill bit.
• If installing on a wood surface, you can screw the bracket directly into your wall.

If you have a Ring Solar Panel

Ring Solar Panel charges your Spotlight Cam continuously—no need to charge or swap out batteries. For more info, visit ring.com

Mark the holes

Select an install location where the Solar Panel can get at least 1 hour of direct sunlight a day. Mark the holes using the mounting arm as a template.

Install wall anchors. (optional)

If installing on a hard surface (such as stucco or brick), use a 1/4″ drill bit to predrill the mounting holes, then insert the wall anchors. If installing on wood or this step.

Screw in the mounting arm

Drive the included mounting screws into your wall (or the wall anchors, if installed on a hard surface) until the mounting arm is secure.

Attach the Solar Panel

Slot the Solar Panel onto the mounting arm, and make sure it’s secure.

Adjust the panel angle

Loosen the screw on the mounting arm and adjust the panel to your desired angle, then re-tighten the screw to secure your setting.

Remove the seal

Remove the weatherproofing seal on the rear of your Spotlight Cam. Then, slot the mounting plate back into place.

Plugin your Solar Panel

1. If your Solar Panel plug looks like example 1, simply insert it into the power port on the rear of your Spotlight Cam.
2. Press the plug in firmly, until you feel it click into place. You’re all set!
3. If your Solar Panel plug looks like example 2, skip to the next page.

If your plug has screw tabs

Insert the plug into the power port on the rear of your Spotlight Cam. Secure the plug with the included short screws.

DO NOT USE any screw other than the included screws to secure the plug!

Be sure to charge and insert the included battery. Ring Solar Panel charges the battery, but does not replace it.

Attach Spotlight Cam to the mounting bracket

• First, fully loosen the metal collar on the bracket.
• Then, push the ball into the socket until it snaps into place.

Adjust the camera angle

To ensure accurate motion detection, position the camera with the motion detector parallel to the ground.

Then, tighten the screw on the metal collar to secure the camera position.

Review, share, and download

• Your new device comes with a free 30-day trial of our Ring Protect video recording service.
• To continue your subscription and save your videos, please visit ring.com/protect-plans

What is Ring Protect?

Ring Protect is a subscription service that stores videos from your Ring devices.

• Why do I want it?
  Ring lets you interact with visitors and monitor your property in real- time, while Ring Protect allows you to review and share those videos anytime.

• How much does it cost?
  Ring Protect starts at $3 USD/month or $30 USD/year per Ring doorbell or camera. *

• How do I sign up?

• Simply log into your Ring account at ring.com/protect-plans, and follow the on-screen instructions. $5 CAD per month or $50 CAD per year

IMPORTANT PRODUCT INFORMATION

Safety and Compliance Information

Use Responsibly.  Read all instructions and safety information before use.

SAFETY INFORMATION

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE

WARNING:  Small parts contained in your device and its accessories may present a choking hazard to small children.

HANDLE WITH CARE.  Your device can optionally use a rechargeable lithium- ion battery. Do not disassemble, open, crush, bend, deform, puncture, or shred the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or another hazard. Only use the battery for the system for which it is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or another hazard. Do not short circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance. Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them in again.

Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hairdryer. If the device or adapter appear damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm.

Your device can withstand outdoor use and contact with water under certain conditions. However, your device is not intended for underwater use and may experience temporary effects from exposure to water. Do not intentionally immerse your device in water or expose it to liquids. Do not spill any food, oil, lotion, or other abrasive substances on your device. Do not expose your device to pressurized water, high-velocity water, or extremely humid conditions (such as a steam room). To protect against electric shock, do not place cord, plug, or device in water or other liquids.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport

TERMS OF SERVICE AND WARRANTY

Use of the product is subject to your registration with Ring and your agreement with the Terms of Service found at ring.com/terms. To review your warranty coverage, please refer to the enclosure inside this box or visit ring.com/warranty.

FOR USERS IN THE UNITED STATES

FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid. The party responsible for FCC compliance is Ring LLC, 1523 26th Street Santa Monica, CA 90404.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

FOR USERS IN CANADA
Innovation, Science, and Economic Development

Canada (ISED) Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. mThis equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

FREQUENTLY ASKED QUESTIONS

• How long do batteries last?
  The battery life completely depends on your usage. The camera comes with a 6,000mAh battery pack.

• Can more than one camera be hooked up to a single solar panel?
  Yes, you can hook more than one camera to a single solar panel.

• Is it waterproof?
  No, the camera is only water-resistant.

• Can you use this if you don’t have Alexa?
  Yes, you can use it with the ring App.

• Can I connect an external power supply instead of the batteries?
  Yes, you can follow the steps to connect it to a solar panel.

• Do the hardwired ones have battery backup?
  No, they don’t have a battery backup.

• Does it work with iPhone?
  Yes, it is compatible with iPhone

• Can I add additional cameras later to the app?
  Yes, you can add cameras to the app.

• Can this camera be hard wired to a router? My Wi-Fi won’t change to2.4GHz
  No, the camera can’t be hard-wired to a router.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>