EARNSHAW Astronomy Observatory Dual Slot Winder Instruction Manual
- June 3, 2024
- EARNSHAW
Table of Contents
LONDON
INSTRUCTION MANUAL
**Vol.1.10
Astronomy Observatory Dual Slot Winder
ASTRONOMY
OBSERVATORY DUAL SLOT WINDER
The enclosed device has been carefully manufactured and engineered to deliver
a unique experience, to help deliver kinetic energy to your automatic
timepiece.
With different settings, this dual watch winder will move your timepiece just
the right amount and prevent it from stopping due to a lack of sufficient
charge. This means your watch is ready to go as soon as it’s on your wrist.
Designed to mimic the multiple axis rotations of a gyroscope, the winder is
also a spectacle of movement and will serve as many hours of visual delight in
operation, as it protects and preserves the life of your automatic
mechanically powered timepiece.
For more details on operating this watch winder please refer to the enclosed
booklet or visit : im.mainspring.store
WHAT’S INSIDE
Your Watch Winder comes packed with the following:
1. Double Watch Winder
2. Watch Pillow x 2pcs| 3. USB Cable
4. Multi-Adapter
---|---
INSTRUCTIONS
- Carefully lift the glass protector bell off the base.
- Place your watch on the enclosed watch pillow that will attach to the winder.
NOTE:
* Please do not directly turn the turntable with hand at any time.
-
Please use power adapter after taking out the battery from battery case.
-
Please cut off power and stop the turntable before putting in or taking out the watches.
-
Please pull out power socket or take out battery if watch winder is not used for a long time.
-
Please do not place the product under sunshine or at wet places. 3. Connect the enclosed power adapter to the socket behind the device.
-
Plug the power adapter into a wall socket.
-
Power ON / OFF button.
-
OPERATION MODES
Besides on and off, the Watch Winder has 4 different mode settings for your selection:
Mode 1: 2 minutes turning clockwise, rest 6 minutes, 8 minutes per cycle.
Mode 2: 2 minutes turning counter-clockwise, rest 6 minutes, 8 minutes
per cycle.
Mode 3: 2 minutes turning clockwise, rest 6 minutes, 2 minutes turning
counter-clockwise, rest 6 minutes, 16 minutes per cycle.
Mode 4: 5 minutes clockwise, 5 minutes counter-clockwise, recycle in 3
hours, rest 9 hours. 12 hours per cycle.
CARE AND MAINTENANCE
- Please do not place your watch winder in direct sunlight or other heat sources such as radiators, electric heaters or stoves.
- Your watch winder should be kept away from water and liquids.
- Avoid placing your winder next to areas of excessive sand, dust or other objects that may vibrate, as this may also impact the functioning of your winder.
- Please store your watch winder at room temperature.
- When the watch winder is on, make sure there is nothing stopping or blocking it from turning.
- Unplug your watch winder if not being used for a prolonged period of time.
- Watch winders are not toys. We recommend that you store your winder carefully out of reach of children.
- Your watch winder does not require any special maintenance. We recommend cleaning it regularly with a soft, damp cloth, then wiping it dry.
RECYCLING
Your watch winder, together with new or used batteries, must not be disposed
of as household waste. These elements must be taken to a waste collection
point that recycles electrical devices and batteries.
By ensuring these products are disposed of properly you can help prevent
potentially harmful effects, both to the environment and human health.
Recycling helps conserve natural resources. For further information on
recycling this product please contact your local authority, waste collection
site, or place of purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>