EARNSHAW ES-JP-QZ-3H-WD-VJ32 Admiral 42mm Quartz Watch Instruction Manual
- June 4, 2024
- EARNSHAW
Table of Contents
EARNSHAW ES-JP-QZ-3H-WD-VJ32 Admiral 42mm Quartz Watch Instruction Manual
DISPLAY
TIME SETTING
- Pull out the crown to the position 2.
- Turn the crown to set the hour and minute hands.
- Push the crown back to position 0.
DATE SETTING
- Before setting the date, be sure to set the time.
- Pull out the crown to the position 1.
- Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown for the desire date.
- After setting, push the crown back to position 0.
WATER RESISTANCE
The water resistance indicated on your timepiece serves only as a guide. Actual water resistance may vary depending on a number of important factors including temperature, water salinity, and actual use under water.
The water resistance of your timepiece may eventually be compromised over time with general wear and tear and the use of your watch under adverse conditions.
Always remember to employ the screw down crown (if available) to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
Note that you should NEVER wear your watch in a jacuzzi, hot shower or steam room where steam may enter the case despite the watertight seals used to protect your watch
The steam may cause condensation inside your watch, which may affect and damage the inner workings of your watch – which would also not be covered by the warranty.
For more details on operating this timepiece please refer to the enclosed booklet or visit: IM.THOMAS-EARNSHAW.COM
QR CODE:
Documents / Resources
|
EARNSHAW ES-JP-QZ-3H-WD-VJ32 Admiral 42mm Quartz
Watch
[pdf] Instruction Manual
ES-JP-QZ-3H-WD-VJ32, Admiral 42mm Quartz Watch, 42mm Quartz Watch, Quartz
Watch, ES-JP-QZ-3H-WD-VJ32, Watch
---|---