Reliable 8000CJ Jewelry Steam Cleaner Instruction Manual

Reliable 8000CJ Jewelry Steam Cleaner

INTRODUCTION

RELIABLE. RIGHT THERE WITH YOU. At Reliable, we do what we love, and take pride in doing it right. You want what’s best for the people, places and things that matter in your life – from where you live to what you wear. So do we. From the start, we approach every product with a craftsman’s attention to detail and passion for making it right. Quality, functionality, design and customer service play an equally important part in delivering what’s right for you. With its stainless steel construction, and professional grade components; the 8000 Series will allow you to obtain the benefits of professional pressing or cleaning in a compact and convenient format.
For your safety and to fully enjoy the advantages of this product, please take a few minutes to read all the important safeguards and care instructions. Keep this manual handy and review the product warranty for your reference.

• 1 = water inlet
• 2 = pump
• 3 = water discharge
• 4 = power inlet
• 5 = solenoid valve
• 6 = water container valve

THE INSTALLATION AND USE OF THIS PROFESSIONAL EQUIPMENT MUST BE DONE BY COMPETENT AND TRAINED PERSONNEL WITH APPROPRIATE TECHNICAL KNOWLEDGE AND UNDERSTANDING OF APPLICABLE SAFETY STANDARDS. BEFORE USING THIS EQUIPMENT IT IS NECESSARY TO CONDUCT THE FOLLOWING STEPS:

1. Water connection (tap with hose holder); the steam generator can be con-nected to the tap with hose holder labelled WATER INLET (fig. 5 #1), placed on the Boiler, via a rubber tube which must have a pressure capacity of at least 100 lbs. This rubber tube must be fixed tightly with 2 hose clamps.
   (NOTE: before inserting the rubber tube into the water inlet, you must flush a few litres of water in order to clean the conduit).

2. Protected electrical plug, suitable to the power voltage of the steam generator.

3. 8000CJ – Screw the nozzle into the steam fitting and plug in the 4-pin receptacle for the electronic foot pedal.

PACKAGE OPENING

1. Remove the Boiler from the box, affix the wands, connect iron sockets and steam tubes, fix the iron cable to cable/steam wand support hook.

CONNECTION TO WATER PIPE AND STARTING

1. Connect the rubber tube to the tube holder called WATER INLET placed on the steam generator and turn the water tap on.

2. Connect the power supply cable to a protected plug with a grounded switch, and a voltage suitable to the steam generator voltage.

3. After switching on the Boiler (A) and the irons and the steam switch (B), wait for the Boiler green pilot light to switch off (C) and for the pressure gauge to indicate 50-60 lbs. At this point press the steam button 3 or 4 times, so that the steam comes out: this must be carried out in order to heat up the hose that delivers steam to the iron steam wand/nozzle. This prevents water leakage (the steam iron must always be held in such a way as not to harm the operator.

4. To adjust steam flow, regulate the steam adjustment tap (fig. 5 #6: solenoid valve).

5. The Boiler is now ready for use. During use, the “steam ready” pilot light switches on and off (C).
   ATTENTION: Make sure that water is always available for the steam generator, the lack of water can cause air bubbles inside the conduit, i.e. the water will not reach the Boiler while the Boiler is under pressure. Without water, the pump will function for about a minute; after that the alarm will sound and will cause the automatic shut down of the entire unit.

6. Water pressure should never go under 3.5 lbs, otherwise the pump will stop and, accordingly, the water will not reach the Boiler.

CONNECTION TO THE WATER TANK

1. The Boiler is designed to be connected to a direct waterfeed. If a direct water-feed source is not available a water container kit is available.
   IF USING THE WATER CONTAINER KIT ENSURE THAT THE VALVE TO THE DIRECT FEED IS IN THE CLOSED POSITION.

2. To assemble the kit please proceed as follows:

   • Insert the silicon hose on the water container valve (fig. 5 #6) and place the opposite end into the water tank.
   • Insert the other silicon hose on the water inlet (fig. 5 #1), placing the other end into the water tank.

IMPORTANT

1. Use only tap water.
2. Flush the Boiler once a week, making sure that the unit is shut off and that the Boiler pressure is not over 0 lbs (pressure gauge). Open exhaust tap slowly (water discharge). During this operation wear appropriate regulation gloves, in order to avoid burns.
3. Never leave hot iron on the ironing board.
4. When not in use, switch the Boiler off and close the water tap; remember to open the water tap  before switching on the machine again (only for the units connected to the direct water feed).
5. Always keep children away from the Boiler, both when it is on and off.
6. Make sure that during cold seasons the tubes that connect the Boiler to water supply do not freeze.
7. Do not put additives in the water.
8. Standard and extraordinary maintenance must be carried out by authorized personnel and all the components must be replaced only with original spare parts.

WATER LEVEL PROBE CLEANING PROCEDURE

We recommend you clean the water level probe once a month. This cleaning operation must be carried out ONLY by authorized personnel. Please follow the cleaning instructions as indicated below:

1. REMOVE THE COVER OF THE LEVEL PROBE
2. REMOVE THE CONNECTION PLUG
3. UNSCREW THE LEVEL PROBE WITH A TUBE SPANNER DIAM. 18MM
4. TAKE OUT THE LEVEL PROBE

SPECIFICATIONS

• Power supply: 120V
• Total Installed Power 1200W
• Pump Power: 60 Hz 1,1.5 mm c f
• Boiler Capacity: 4.5 L/1.25 Gal
• Ironing Endurance: CONTINUOUS
• Operating Steam Pressure: 60 PSI / 4 BAR
• Maximum Pressure: 80 PSI / 5.5 BAR

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT

This product must not be disposed of as urban waste. It must be taken to a special local waste collection centre or to a dealer providing this service.

AT END OF DAY:

RELEASING STEAM PRESSURE

To prolong the life of the boiler and its components, we recommend that this task be performed at the end of the day.

1. Turn off the boiler switch.
2. Press the pedal until the pressure drops to zero.
3. To complete the shutdown of the boiler, turn the steam switch off.

EVERY WEEK:

FLUSHING THE BOILER OUT

To prevent limescale deposits, the boiler should be drained every week.

1. Should be completed in the morning or when the boiler is cold with zero pressure.
2. Remove the plug (using an 8mm alien key) from the drain valve.
3. Attach the supplied clear drain hose to the drain valve.
4. Open the drain valve and allow the water to be emptied into a large container.
5. When completely emptied, close the drain valve.
6. Remove the hose and reattach the plug at the end of the drain valve.
7. The unit is now ready to be filled with water.

DAILY USE

REFILLING YOUR BOILER

Use tap water or 50/50 tap/distilled water in the appliance. Do not use perfumed or products containing alcohol in the appliance.

Tips:

Filling your tank before the low water indicator light flashes will prolong the life of your boiler.
Example: If your boiler runs out of water everyday at 2pm, ensure you refill at noon everyday.

CAUTION:

Prolonged periods of time with no water or low water can be harmful to the boiler or element. Important: The low water indicator is a safety, not a function.

RESETTING YOUR BOILER (IF REQUIRED)

If the water light is on too long, the safety thermostat reset will engage. If it engages, follow these instructions:

1. Turn off the boiler switch.
2. To ensure your safety, press the steam pedal until the pressure drops to zero.
3. Unscrew the reset button cover.
4. Press the reset button.
5. Screw on the reset button cover.
6. Turn on the boiler switch.

RELIABLE CORPORATION (1) YEAR LIMITED & (2) YEAR LIMITED

WARRANTY PRESSURIZED STEAM BOILER TANKS

This warranty contains warranty terms and conditions that may vary depending on the part or system covered. A warranty for specific parts or systems is governed by the coverage set forth in that warranty section as well as other provisions in this Limited Warranty.
THIS RELIABLE STEAM BOILER LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY MADE IN CONNECTION WITH YOUR NEW RELIABLE STEAM BOILER. All other implied or express warranties or conditions are disclaimed to the fullest extent allowed by the law in your Warranty Region, including, but not limited to, implied warranties and conditions of merchantability, fitness for a particular purpose, durability, or those arising out of a course of dealing or usage of trade. Some Warranty Regions do not allow limitations on implied warranties or conditions and/or how long an implied warranty or condition lasts, so the above limitations may not apply to you. The performance of necessary repairs and parts replacement by RELIABLE is the exclusive remedy under this New Reliable Steam Boiler Limited Warranty or any implied warranties. Reliable does not authorize any person or entity to create for it any other obligations or liability in connection with this Reliable Steam Boiler Limited Warranty. The decision of whether to repair or replace a part or to use a new or reconditioned part will be made by Reliable, in its sole discretion.

New Reliable Steam Boiler Unit Limited Warranty

Subject to separate coverage for certain parts and the exclusions and limitations set forth below, Reliable Corporation (“Reliable”) warrants the New Reliable Steam Boiler against defects in materials and workmanship for one year from the date of original purchase.  The exclusive remedy available to the original purchaser under this Limited Warranty is the repair of the defective unit by Reliable for the covered defects. Such repair or parts replacement will be performed by Reliable without cost to the original purchaser when Reliable is notified of the covered defect within the first year of the original purchase date.
Reliable Corporation warrants the inner boiler tank part against leakage for two years from the date of the original purchase of the New Reliable Steam Boiler of which the tank is a part.  The exclusive remedy available to the original purchaser under this Limited Warranty is the replacement of the inner steam boiler tank of the defective unit by Reliable.  Such repair or parts replacement by Reliable will be performed without cost to the original purchaser when Reliable is notified within the first year of the original purchase date.  Should Reliable be notified of a warranty claim for the Inner Steam boiler tank during the second year from the original purchase date of the New Reliable Steam Boiler the warranty will cover the replacement of the Inner steam boiler tank only exclusive of any and all shipping costs.
This limited warranty does not cover any damage to a New Reliable Steam Boiler or Steam Boiler Tank that results from improper installation, wear-and-tear, accident, misuse, unreasonable use, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions or any unauthorized disassembly, repair or modification.  This limited warranty does not extend to any indirect, consequential or incidental damages that may be suffered by a user from the use of a New Reliable Steam Boiler, including without limitation, any liability for third party claims for damage, and is limited to the amount paid by the original purchaser for the Reliable Steam Boiler with respect to which this limited warranty applies.  This limited warranty does not apply to any product which has been altered, or which are missing serial numbers, or not purchased directly from Reliable or a dealer authorized by Reliable to sell the Reliable Steam Boiler.
To submit a claim for warranty service under the terms of this warranty, please contact customer service at support@reliablecorporation.com or call 1-800-268-1649.
Please note that proof of purchase will be required and must reflect that you are the original purchaser and that the purchase was made directly from Reliable Corporation or an authorized Reliable dealer.  Please also provide the model and the serial number of the Reliable Steam Boiler, respond to questions designed to assist with diagnosing potential issues and follow Reliable’s procedures for obtaining warranty service.
Any warranty claim must be in compliance with the terms set out in this document or any subsequent document issued by Reliable in connection to this policy.
All repairs are done at the premises of Reliable Corporation, at 5-100 Wingold Ave,  North York, Ontario, M6B 4K7, Canada.

RELIABLE PRODUCTS WARRANTY

Reliable Corporation (“Reliable”) warrants to original purchaser of its products that every product sold by Reliable (a “Reliable Product”) is free from defects in material and workmanship for a period of one year from the date of purchase if properly used and maintained. Subject to the conditions and limitations set forth below, Reliable will either repair or replace any part of a Reliable Product that proves defective by reason of improper workmanship or materials. If the defective Reliable Product is no longer available and cannot be repaired effectively or replaced with an identical model, Reliable shall replace the defective Reliable Product with a current Reliable Product of equal or greater value. Repaired parts or replacement products will be provided by Reliable on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace a Reliable Product, it will refund the current value of that Reliable Product at the time the warranty claim is made.
This limited warranty does not cover any damage to a Reliable Product that results from improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions, wear and tear resulting from normal use of the product, or any unauthorized disassembly, repair, or modification. This limited warranty does not extend to any indirect, consequential or incidental damages that may be suffered by a user or from the use of a Reliable Product, including without limitation, any liability for third party claims for damage, and is limited to the amount paid by the original purchaser Reliable Product with respect to which this limited warranty protection applies. This limited warranty does not apply with respect to products that have been altered or which are missing serial numbers or for products not purchased directly from Reliable or a dealer authorized by us to sell Reliable Products.
This limited warranty is the only warranty that applies to any Reliable Product, supersedes any and all terms that may be contained in any other document or purchase order and may not be altered or amended except expressly in writing by Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our customer service group at 1-800-268-1649 or at support@reliablecorporation.com.
You will be required to submit an original receipt via fax or e-mail. The receipt must reflect that you are the original purchaser, the product was bought directly from us or from an authorized Reliable dealer and that the warranty claim is being made within the warranty period. You will be issued a return authorization number (RA#) and asked to ship the defective product together with proof of purchase and RA#, prepaid insured to the following address:
Reliable Corporation, 5-100 Win gold Avenue, Toronto, ON  M6B 4K7. Freight collect shipments will be refused. The risk of loss or damage in transit will be borne by the customer. Once Reliable receives the defective product, it will initiate the repair or replacement process.

If you have any questions regarding this warranty, you may write to:

Reliable Corporation 100 Win gold Avenue, Unit 5 Toronto, Ontario Canada M6B 4K7 www.reliablecorporation.com

FAQs

Does steam damage jewelry?

Because steam cleaning doesn’t use any harsh chemicals or solutions that could potentially harm jewellery, it is one of the safest and most efficient ways to clean jewellery.

How often can you steam clean jewelry?

While cleaning your ring makes it look lovely and sparkling, using steam and ultrasonic cleaners on a daily basis can overwork your ring and loosen the side stones. Every two to ten weeks, you should clean your ring, as recommended.

Is steam the best way to clean jewelry?

Because steam cleaning doesn’t use any harsh chemicals or solutions that could damage your jewelry’s lustre, it is one of the safest ways to clean jewellery. Wearing the jewellery exposes your body to the harsh chemicals, which can harm your skin in addition to the jewellery.

What should you not clean with a steamer?

Unsealed floors, melted plastic, and swollen laminate floors can all be caused by steam. Not these surfaces with steam cleaning. Cold windows, unglazed tile, surfaces painted with water-based paint, and delicate surfaces are additional surfaces that should not be cleaned.

Does steam cleaning damage?

Things That Cannot Be Steam Cleaned. The moisture may harm painted walls and unsealed floors, including hardwood, cork, and unglazed tile. Cold window glass can crack due to the heat from steam.

Why do you steam jewelry?

Heat and steam make dirt and debris on the jewellery easier to remove by loosening them. Put your pieces in a heat-resistant container, then slowly pour boiling water over them until they are submerged.

Is ultrasonic or steam better to clean jewelry?

The best method for cleaning jewellery is with an ultrasonic cleaner. To produce the cavitation effect, ultrasonic cleaners use high frequency sound waves in a tank of water.

Can I use chemical on steam cleaner?

Detergents and disinfectants contaminate the steam cleaner’s interior and release dangerous chemicals, so nothing can be put in it. Vinegar is safe to use inside steamers because it sanitises and eliminates harmful bacteria.

How does jewelry cleaner work?

Jewelry can be cleaned and tarnished off using ultrasonic cleaners. They combine chemicals and ultrasound waves to produce bubbles that “cling” to foreign objects like dirt, oil, and unidentified substances. The contaminants are removed from the object by the high frequency waves that are emitted.

Is steam cleaning better than using chemicals?

Because steam can reach deeply into pillows, carpets, and other surfaces, it is more effective than chemicals. Flea eggs and dust mites have no chance of surviving. Bacteria that produce unpleasant odours are destroyed by steam. It can be used to deodorise pet beds, restrooms, and other smelly areas quickly and easily.

How long does it take for a steam cleaner to heat up?

Depending on the model, a Chief Steamer will take 8–13 minutes to fully heat and reach pressure.

How efficient are steam cleaners?

Steam cleaners are an effective and environmentally friendly cleaning tool that can eliminate over 99% of bacteria, microbes, and other allergens just by using steam, eliminating the need for additional cleaning agents.

Can I put alcohol in my steamer?

If you use a carpet steamer, a mixture of 50% rubbing alcohol, 40% water, and 10% vinegar will perform better than the majority of store-bought brands. The vinegar deodorises, the alcohol cleans and cuts grease.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>