Yueqing Reliable Electric HCS301 Common Push-Pull Cover Remote Control Instruction Manual
- June 6, 2024
- Yueqing Reliable Electric
Table of Contents
Yueqing Reliable
Electric HCS301 Common Push-Pull Cover Remote Control
Instruction Manual
Common push-pull cover remote control-related parameters:
(fixed code, learning code, rolling code, dial code at each frequency,
copy)
- Working voltage: DC12V (one 23A battery)
- Working current: 8mA
- Working frequency: 315 (330 350 390 430 418 433 and other specialists can be customized)
- Modulation method: ASK (amplitude modulation)
- Transmitting power: 100mW
- Launch distance: 50 ~ 150m (open space)
- Encoding type: 2262 (learning code EV1527 rolling code HCS301 dial code copy type)
- Dimensions: 62×39×12mm
- Working temperature: -10+50
- Self-test: with a low-voltage detection function, when the battery supply voltage is low, the indicator light will not light, which proves that the battery needs to be replaced
- Appearance color: red mahogany, golden mahogany, pearl white, emerald, blue, matte black, glossy black.
- Product use: remote control of rolling shutter doors of garages, retractable gates, LED lamps, LED special flashing lights, various alarm devices, switch signals, remote control audio, and other remote control fields
Note: special frequencies, special symbols, need to be customized.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
RF warning statement:
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.