Reliable 3000IS Steam Ironing System Instruction Manual

Reliable 3000IS Steam Ironing System

INTRODUCTION

CONGRATULATIONS At Reliable, we do what we love, and take pride in doing it right. You want what’s best for the people, places and things that matter in your life – from where you live to what you wear. So do we. From the start, we approach every product with a craftsman’s attention to detail and passion for making it right. Quality, functionality, design and customer service play an equally important part in delivering what’s right for you. With its stainless steel construction, and professional iron; the 3000IS will allow you to obtain the benefits of professional pressing in a compact and convenient format.
For your safety and to fully enjoy the advantages of this product, please take a few minutes to read all the important safeguards and care instructions. Keep this manual handy and review the product warranty for your reference.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

When using your Reliable™ steam station, basic safety precautions should always be followed. Please read the following instructions carefully as they provide important information concerning how to install, use and care for this product.

1. To protect against the risk of electric shock, do not immerse the appliance in water.
2. Do not allow the cord to touch hot surfaces.
3. Always allow the appliance to cool for at least thirty minutes before storing.
4. Always put the appliance in a secure place on a table or counter when using.
5. Do not move the appliance without unplugging it first.
6. Always disconnect the appliance from the outlet before filling with or removing water. Be careful to avoid spilling water on the appliance when filling.
7. Use tap water or 50/50 tap/distilled water in the appliance. Do not use perfumed or products containing alcohol in the appliance.
8. Always disconnect the appliance when not in use.
9. Do not use the appliance if the cord is damaged. Return the appliance or have the cord repaired by the manufacturer, or their service agent.
10. Do not operate the appliance if it has been dropped or damaged. Do not disas-semble the appliance. Incorrect reassembly can cause a risk of electric shock. Send it to an authorized service center for repair.
11. Do not operate another high wattage appliance on the same circuit.
12. This appliance must be grounded. Do not alter the plug or attempt to remove this feature.
13. Be careful. Burns can occur from touching hot metal parts or steam.
14. This appliance is not intended for use by young children.
15. While using the appliance, never unscrew or remove the cap (1) while the boiler is under pressure.
16. Before removing the cap, make sure there’s no more steam in the steam cham-ber by shutting the boiler switch (4) to the off position, and pressing the steam iron button (7) to release all of the remaining steam.
17. To ensure your safety, the safety cap (1) and all other components must be replaced with original parts only.

FEATURES

• Your new ironing station provides clean, professional results every time
• The professional iron soleplate is made from durable, and fast heating aluminum
• Stainless steel outer shell construction for long life
• Adjustable thermostat allows for accurate temperature settings
• Cork handle iron is comfortable and stays cool
• Low water light indicator
• Auto shut-off thermostat protection
• Regular tap water or 50/50 tap/distilled water
• 35 p.s.i operating pressure
• 12-gauge heavy-duty wiring
• Up to 2 hours of steam

IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the garbage. Instead, go to your closest recycling station or waste collection center for subsequent treatment. In this way, you will be contributing to looking after the environment.

HOW TO ASSEMBLE AND USE

1. Remove the ironing station from its packing and make sure all packing has been removed (including the protective bags). Put the station on a flat and solid surface.
2. It is recommended to put the iron on the iron pad, (supplied) as the pad will withstand the temperature of the iron
3. Insert the two-piece wand (2) into the flange on top of the boiler, tighten with the side screw and attach the spring on the iron hose to the coil end of the wand.
4. Unscrew the safety cap (1). Fill the boiler with a maximum of 4.65 cups (1.1 litres) of water for the 3000IS. Use the funnel supplied, making sure you do not overfill the tank (you can also use the water stick to determine the water level in the steam tank).
5. Insert the plug into the electrical outlet; switch on the boiler (4) and steam button (3). When the two button lights come on, the iron and boiler are working.
6. Turn the iron plate’s temperature regulating knob (6) to the position
7. “cotton°°°” (indicated on the iron knob).
8. Wait for the boiler button’s red light (4) to turn off (it takes about 10 minutes). NOTE: While ironing, the boiler button’s red light normally turns on and off, indicating the heating element is activated or not.
9. NOTE: When you call for steam for the first time (after having turned the boiler on) you might notice a fast decrease in pressure. This is normal for the first time.
10. The steam station is ready for use.
11. Push the steam button (7) on the iron for steam.
12. This steam product is equipped with a low water warning light (5). During operation, if the light comes on, it indicates that the unit requires more water to operate. If this occurs, please follow these steps.
13. Press the steam iron button (7) to ensure there is no more steam in the boiler.
14. Slowly open the pressure cap (1) and refill to the required level with warm water.
15. Replace the cap, tighten and press the thermostat reset button (8), wait for it to build up pressure again.

IMPORTANT

When you are finished using the boiler for the day, unscrew the fill cap one- turn on the unit to release the steam/air from the tank. This will eliminate the vacuum that may cause damage to the pressure gauge.
The boiler must be cleaned periodically and any sediment/mineral buildup removed from inside the unit; otherwise, it may become clogged. The period between clean-ings depends on the frequency of use and the quality/hardness of the water used. If the unit is in daily use with regular municipal tap water, we recommend a cleaning every two weeks to a month.

TO CLEAN THE BOILER UNIT

1. Unplug the unit from the wall.
2. Add a mixture of 1 part white vinegar to 5 parts water and pour inside the boiler tank to capacity. Let the vinegar solution sit overnight.
3. Pick up the boiler unit and pour approximately half of the solution out of the boiler tank. Vigorously shake/swirl the remaining solution around the tank to loosen and pick up any softened sediment that may have accumulated inside. Pour the remaining solution out of the tank. You may see bits of sediment and mineral come out at this point.
4. Rinse the tank with clean water until there is no smell of vinegar or any sedi-ment bits coming from inside the tank. NOTE: Sediment/mineral pieces can be blown into the solenoid valve or the steam nozzle during operation so it is important that they are not left in the tank after cleaning.
5. The unit is now ready for use.

WATER INSTRUCTIONS

Use tap water or 50/50 tap/distilled water in the appliance. Do not use perfume or products containing alcohol in the appliance.

DESCRIPTION OF THE IRON STATION

1. Safety cap
2. Wand to hold mono-hose up
3. Iron button
4. Boiler button
5. Light for low water
6. Temperature regulating knob
7. Steam button
8. Thermostat reset button

TECHNICAL DATA

• Adjustable iron thermostat set from 60°C to 215°C
• Bimetallic safety iron thermostat with manual reset at 275°C
• Full aluminum plated heating element at 800W – 120V Boiler power 3000IS: 700W
• Working pressure 3000IS: 2,5 bar
• Tank nominal capacity of model 3000IS: 1.4 litres

PARTS DRAWING

RELIABLE CORPORATION LIFETIME PRODUCT WARRANTY POLICY FOR PRESSURIZED STEAM BOILER TANKS

Reliable Corporation (“Reliable”) warrants to the original purchaser of the boiler noted above from Reliable (the “Reliable Boiler Tank”) that it will be free from defects in materials and workmanship when utilized for normal use by the original purchaser only. Should the Reliable Boiler Tank need replacement, Reliable will do so at no parts and labor cost to the original purchaser, exclusive of shipping.
Subject to the conditions and limitations set forth below, Reliable will either repair or replace any part of a Reliable Boiler Tank that proves defective by reason of improper workmanship or materials. If the defective Reliable Boiler Tank is no longer available and cannot be repaired effectively or replaced with an identical model, Reliable shall replace the defective Reliable Boiler Tank with a current Reliable Boiler Tank of equal or greater value. Repaired parts or replacement products will be provided by Reliable on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace a Reliable Boiler Tank, it will refund the current value of that Reliable Boiler Tank at the time the warranty claim is made.
This limited warranty does not cover any damage to a Reliable Boiler Tank that results from improper installation, accident, abuse, misuse, unreasonable use, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions or any unauthorized disassembly, repair or modification. This limited warranty does not extend to any indirect, consequential or incidental damages that may be suffered by a user from the use of a Reliable Boiler Tank, including without limitation, any liability for third party claims for damage, and is limited to the amount paid by the original purchaser for the Reliable Boiler Tank with respect to which this limited warranty protection applies. This limited warranty does not apply with respect to products that have been altered or which are missing serial numbers or for products not purchased directly from Reliable or a dealer authorized by Reliable to sell the Reliable Boiler Tank.
This limited warranty is the only warranty that applies to the Reliable Boiler Tank, supersedes any and all terms that may be contained in any other document or purchase order and may not be altered or amended except expressly in writing by Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our customer service group at 1 800 268 1649 or at support@reliablecorporation.com. You will be required to submit an original receipt via fax or e-mail. The receipt must reflect that you are the original purchaser, the product was bought directly from Reliable or from an authorized Reliable dealer and that the warranty claim is being made in compliance with the terms set out in this document or any subsequent document issued by Reliable in connection with this policy. You will be issued a return authorization number (RA#) and asked to ship the defective product together with proof of purchase and RA#, prepaid insured to the following address: Reliable Corporation, 5–100 Win gold Ave, Toronto, ON M6B 4K7.
Freight collect shipments will be refused. The risk of loss or damage in transit will be borne by the customer. Once Reliable receives the defective product, it will initiate the repair or replacement process.

RELIABLE PRODUCTS WARRANTY

Reliable Corporation (“Reliable”) warrants to original purchaser of its products that  every product sold by Reliable (a “Reliable Product”) is free from defects in material and workmanship for a period of one year from the date of purchase if properly used and maintained. Subject to the conditions and limitations set forth below, Reliable will either repair or replace any part of a Reliable Product that proves defective by reason of improper workmanship or materials. If the defective Reliable Product is no longer available and cannot be repaired effectively or replaced with an identical model, Reliable shall replace the defective Reliable
Product with a current Reliable Product of equal or greater value. Repaired parts or replacement products will be provided by Reliable on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace a Reliable Product, it will refund the current value of that Reliable Product at the time the warranty claim is made.
This limited warranty does not cover any damage to a Reliable Product that results from improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions, wear and tear resulting from normal use of the product, or any unauthorized disassembly, repair, or modification. This limited warranty does not extend to any indirect, consequential or incidental damages that may be suffered by a user or from the use of a Reliable Product, including without limitation, any liability for third party claims for damage, and is limited to the amount paid by the original purchaser Reliable Product with respect to which this limited warranty protection applies. This limited warranty does not apply with respect to products that have been altered or which are missing serial numbers or for products not purchased directly from Reliable or a dealer authorized by us to sell Reliable Products.
This limited warranty is the only warranty that applies to any Reliable Product, supersedes any and all terms that may be contained in any other document or purchase order and may not be altered or amended except expressly in writing by Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our customer service group at 1-800-268-1649 or at support@reliablecorporation.com.
You will be required to submit an original receipt via fax or e-mail. The receipt must reflect that you are the original purchaser, the product was bought directly from us or from an authorized Reliable dealer and that the warranty claim is being made within the warranty period. You will be issued a return authorization number (RA#) and asked to ship the defective product together with proof of purchase and RA#, prepaid insured to the following address:
Reliable Corporation, 5-100 Win gold Avenue, Toronto, ON  M6B 4K7. Freight collect shipments will be refused. The risk of loss or damage in transit will be borne by the customer. Once Reliable receives the defective product, it will initiate the repair or replacement process.
If you have any questions regarding this warranty, you may write to:

RELIABLE CORPORATION

100 Win gold Avenue, Unit 5 Toronto, Ontario Canada M6B 4K7 www.reliablecorporation.com

FAQs

When should you use Reliable 3000IS steam when ironing?

If you want to get rid of wrinkles in fabrics, especially delicate fabrics that can’t be ironed like silk, woollens, and items with pleating, a steamer can take the place of an iron. But steaming produces a smooth, unpolished finish; ironing produces a crisp, pressed polish.

Can Reliable 3000IS steam irons be used without water?

Yes. Simply unplug your steam iron, allow it to cool, and then empty the water tank to remove the water from the iron. Turn the dial to the dry/steam setting, if your iron has one, or to the “MIN” setting, if it doesn’t have a dry/steam setting.

What is the lifespan of a Reliable 3000IS steam iron?

Most expensive steam irons ought to last 10 to 20 years. However, there’s a good chance that technology will advance significantly over the next 20 years, so you might decide to upgrade before your iron reaches the end of its useful life.

What causes a Reliable 3000IS steam iron to stop working?

When the iron press’s fuse burns or blows, it may occasionally lose power completely. This is why it’s critical to find a quick solution. IF THIS IS THE CASE, THEN THE ONLY SOLUTION IS TO HAVE A PROFESSIONAL CHECK THE FUSE AND THEN REPLACE IT.

When should you stop Reliable 3000IS steaming?

As you steam, you’ll notice that the milk’s temperature warms up on your palm. When you are unable to hold the jug for three seconds in a row, the temperature is correct. You now have the go-ahead to extinguish the steam wand.

What heat is used for Reliable 3000IS steaming?

The steaming process starts when the water reaches about 100 degrees Fahrenheit. The highest temperature at which food can be cooked is 212 degrees Fahrenheit, the temperature at which water boils. To steam food on the stovetop, you only need a pot and a steamer basket, which are both very basic pieces of kitchenware.

What are the disadvantages of Reliable 3000IS steam iron?

Disadvantages: Steam irons need to be refilled more frequently than other steam ironing systems because they don’t produce as much heat as a steam generator or other steaming systems, which means ironing your fabrics may take a while to remove every crease.

How do you maintain a Reliable 3000IS steam iron?

Keep the anti-calc valve clean. To do this, unplug the iron and give it 45 minutes to cool. Maintain a spotless and smooth soleplate. Wipe the soleplate of your Tefal Access Easy with a damp, smooth cloth to keep it running smoothly. Observe the after-use protocol.

How long can you leave water in a Reliable 3000IS steamer?

In other words, do not let water remain in your steam appliance for longer than 30 days. We advise draining the water from your steam appliance every 30 days.

How long does a Reliable 3000IS steam iron take to heat up?

Generally speaking, it takes two minutes for your iron to heat up. You can tell when your iron has reached the right temperature for the fabric type you chose by looking at the “Wait” and “Ready” indicators.

How do you stop a Reliable 3000IS steam iron from rusting?

Filling a steam iron requires using distilled water at all times. Even municipally produced, filter-free water contains minerals that can corrode or clog your iron.
After each use, empty the water reservoir on the iron. Any drips should be cleaned up with a microfiber cloth.

What is an disadvantage of Reliable 3000IS steaming?

The fact that steaming food can take longer to cook than other cooking techniques is a drawback. This is necessary so that the food can be cooked in the steam pot’s water, which must first come to a boil. The ability to create moisture retention is yet another benefit.

At what temperature do you get Reliable 3000IS steam?

The highest temperature at which water can exist at atmospheric pressure is 212°F (100°C), which is reached when water is heated at this pressure. Instead of raising the temperature, more heat turns the water into steam.

What is the maximum pressure of Reliable 3000IS steam?

In current practice, steam pressures and temperatures have reached 97–164 bar and 480–565°C or 593°C, respectively. As pressure rises, the rate at which efficiency grows at a higher pressure decreases.

What is the main function of Reliable 3000IS steam?

The ability of steam to transfer heat, sterilize or disinfect objects, and maintain constant temperatures makes it useful across a variety of industries.

What is the main part of Reliable 3000IS steam?

Steam turbines are mounted on a casing and have a rotor with rotating blades attached. The casing, which consists of rows of moving blades piercing between rows of fixed blades, is used to house the rotor.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>