bertoni Baby Walker 2 in 1 Rider Instruction Manual
- June 3, 2024
- bertoni
Table of Contents
bertoni Baby Walker 2 in 1 Rider
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
WARNING
- Prevent access to stairs, steps and uneven surfaces
- Never leave the child unattended
- The child will be able to reach further and move rapidly when in the baby walking frame
- Guard all fires, heating and cooking appliances
- Remove hot liquids, electrical cables and other potential hazards from reach
- Prevent collisions with glass in doors, windows and furniture
- Keep away from a flame.
- Active baby walker function – protective equipment must be worn. Avoid areas with traffic. Suitable for kids of 6+ months.
- Please read carefully the instructions before using this product. Keep itforfuture reference. Failure to comply with the instructions may result in injury to your child.
- The seat height must be appropriate for the child’s heightto avoid injury of the child.
- Ensure that the product is correctly installed and that the locking mechanisms are reliable before using this product.
- To avoid suffocation, remove the plastic packing.
- When the child is in the walker, its legs must touch the floor.
- Do not lift and do not move the walker, when the child is in it.
- Do not place in the walker any load that may affect its stability.
- Do not use it near stairs, thresholds, inclined floors, and other dangerous places. Use only on even and safe surfaces. Ensure that there is no danger of overturning the walker.
- This toy has no brake but only a parking device that restricts the movement of the baby walker.
- The colour and the content may differ from the illustrations.
SAFETY REQUIREMENTS
- This product is intended only for a child, which can sit on its own until it can walk on its own or weighs more than 12kg.
- This baby walker should be used only for short periods (for example, 20 minutes).
- Do not use the product if some elements are broken or missing.
- Do not use accessories or spare parts different from those approved by the manufacturer.
- To avoid possible risks of injury or suffocation, do not place this product in the baby’s bed or the playpen. Do not attach additional cords/ ropes to the toy.
- Small parts. Hazard of ingestion and choking! If applicable, remove the plastic holders, threads, and packing before giving the toy to the child. Do not modify the toy and do not hang it to other objects. Do notwetthe toy and the battery compartment. Keep the product away from direct sunlight and other sources of heat. Do not expose the product to moisture or water. Use this product only on the floor. To be assembled only by adults.
- Prevent access to stairs, steps, and uneven surfaces.
Battery safety information.
BG -The product needs alkaline batteries (not included in the set). To be
assembled by an adult Battery safety information
ATTENTION! In certain cases lrom the batteries may leak liquids, which
may
cause chemical burning or may damage the product. To prevent leakage from the
batteries:
- Do not mix old and new batteries or batteries of a different type.
- Place the batteries as shown inside the batteries compartment.
- If the product will not be used for a longer time, remove the batteries. When batteries are depleted, remove them from the product. Discard safely the batteries, Do not throw batteries in a fire. Batteries may explode or leak.
- Do not cause a short circuit in the batteries.
- Use only identical batteries or batteries of one type, according to the recommendations.
- Do not recharge batteries, which are not rechargeable.
Batteries contain substances that are harmful to the environment. Do not throw the batteries together with the ordinary household waste but deliver them to a specialized place for collecting batteries. Always remove the battery before disposal of the device or delivering it to an official waste collection point. IMPORTANT! After the end of the service life of the device, do not dispose of it together with the ordinary household waste but deliver it to an official collection point. Thus you will help with environmental protection.
| Protect the environment by not disposing of this product with household
waste (2012/19/EU). Check the recommendations to local authorities about
recycling (Only for Europe).
---|---
MAINTENANCE AND CARE
Wipe with a clean cloth dampened with a mild soap and water solution. Do not immerse. Only surface wash. Do not use bleach. Do not dry clean.
CARE AND MAINTENANCE
To be sure that your children will not be accidentally injured, please regularly inspect and take care of the walker.
- The walker is a device that helps children learn how to walk. To prevent incidents, regularly check the product’s condition.
- Check the belts, the bolts, and all parts before use.
- Check the good working orderol the locking mechanism.
- To take care of the health of your child, regularly wash and dry the seat.
- This walker is made of plastic, iron pipes, fabric, and foam rubber. Do not store the walker in wet, cold, or too warm places.
- Do not overload the walker.
Characteristics
Photo A
- Front mirror – 2 pcs.
- Panel -1 pc.
- Base – 1 pc.
- Front wheel – 2 pcs.
- Seat – 1 pc.
- Rear spoiler- – 2 pc.
- Rear wheel – 2 pcs.
- Rubber stopper – 5 pc
ASSEAESY
Install the front and the rear wheels on the base at the designated places and fix them firmly. Install the rubber stoppers as follows, two on each long side and one on the front part of the base (photo 1 ). CAUTION : Always use the stoppers to prevent the falling of the walker downstairs! Assemble the rear spoiler to the base as shown in photo 2. Unfold the front part upwards until you hear “a click” (photo 3 a/b). Unfold the panel with the seat as shown in photo 3 c/d until you hear “a click” Set upright the back of the seat until you hear “a click” (photo 3 d). Install rear mirrors in the assembly holes on both sides of the panel (photo 4 ). Install the batteries this product uses two batteries AA 1,5 V (not included in the set). Remove the cover of the batteries located behind the music panel by unscrewing the fixing screw. Place the batteries as shown on the cover and the place for installation (watch for the poles”+” and “-“). Then close the cover of the batteries and fix it with the screw. Press the musical buttons on the active panel to reproduce music (photo 5). Install the seat by the method shown in photo 6 on the panel and put the upholstery on the plastic back.
OPRATION
To set the height of the baby walker, press the three buttons for setting the legs, as shown in photo 7. To transform the walker into an active walker, press simultaneously the two buttons underneath to connect the panel and the front part as shown in photo 8, then turn the panel and remove ii from the base together with the supporting legs by using the buttons under the base to detach the left and right leg (photo 9). To remove the rear spoiler, first, remove the back wheels. At the bottom of the released holes of the wheels are found the clamps which when pressed, release the rear spoiler. The walker has the function to slow the movement by tightening the screw, which is located on the side of the two rear wheels.
Scan the QR code to get more product information and manual instruction in
more languages. Download QR Scanner App onto your device.
Customer Support
Didis Ltd.
Bulgaria, Shu men, 6 Trakia-iztok Street
Phone : +359 54 850 830
e-mails : [email protected];
[email protected]
Unic importator in Romania
DIDIS INTERNATIONAL
Strada Sfantul Pantelimon Nr.1
Oras Pantelimon, Judetul llfov
Phone : +40 21 211 65 60
Fax : +40 21 210 65 62
E-mail : [email protected]
