bertoni Bambi Baby Walker Swing Instruction Manual

June 8, 2024
bertoni

bertoni Bambi Baby Walker Swing

Bambi Baby Walker Swing

INTRODUCTION

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.
QR-code

ASSEMBLY INSTRUCTIONS

Assembly Instructions
Assembly Instructions

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!

WARNING

  1. Never leave the child unattended
  2. The child will be able to reach further and move rapidly when in the baby walking frame
  3. Prevent access to stairs, steps and uneven surfaces
  4. Guard all fires, heating and cooking appliances
  5. Remove hot liquids, electrical cables and other potential hazards from reach
  6. Prevent collisions with glass in doors, windows and furniture
  7. Keep away from a fire.
  8. Guard all fires, heating and cooking appliances.
  9. This product is not suitable for babies who can not sit or for the ones who can walk.
  10. Before using, please make sure all locking devices are locked.
  11. When the child is in the baby walker, its legs must touch the ground.
  12. Do not lift and do not move the baby walker when the child is in it.
  13. The height of seat should be adjusted appropriately so as to avoid other injures occurred to the baby.
  14. Keep plastic covering away from children to avoid suffocation.
  15. Do not place any load in the baby walker otherwise it will affect the stability of the product.
  16. +Images on the title page and in the instruction manual are only illustrative and may differ from the real product.

SAFETY REQUIREMENTS

  1. his product is intended only fora child who can sit up by itself and until it is able to walk by itself or weighs more than 12 kg. Age: 6m+
  2. This baby walking frame should be used only for short periods of time (e.g. 20 min).
  3. Do not use the product if any components are broken or missing.
  4. Do not use accessories or replacement parts other than those approved by the manufacturer.
  5. To avoid possible risks of injury or suffocation, do not place this product in the baby’s bed or the playpen. Do not attach additional cords/ ropes to the toy.
  6. Small parts. Hazard of ingestion and choking! If applicable, remove the plastic holders, threads, and packing before giving the toy to the child. Do not modify the toy and do not hang itto other objects. Do not wetthe toy and the battery compartment. Keep the product away from direct sunlight and other sources of heat. Do not expose the product to moisture or water. Use this product only on the floor. To be assembled only by adults.

1273:2020 / EN 62115 / EN 71

MAINTENANCE AND CARE

In order to ensure that your children is away from accidental injures please, carry out regular inspection and maintenance of the baby walker.

  1. The baby walker is the tool for the baby to learn walking. To avoid accident with the child please regularly check the product.
  2. Check the belts, the bolts and all parts before use.
  3. Check if locking mechanism is in good order.
  4. For the protection of the baby’s healthy and cleanness the seat should always be washed and dried.
  5. This baby walker is made by plastic, iron pipes, cloth and sponge. Do not store the baby cot in wet, cold or high temperature environment.
  6. Do not overload the baby walker.

ASSEMBLING

INSTALLATION OF THE WHEELS AND RUBBER STOPPERS
  • Insert the wheels and the rubber stoppers into the corresponding openings on the base plate and press the wheel axles into the bottom in order to avoid their dropping down. Picture 1; WARNING : Always use the stoppers to prevent falling off the stairs !
INSTALLATION OF THE SEAT
  • Put the clips on the back of the seat cloth into the reserved groove on the top tray of the walker.
  • Hook the seat clips to the hook teeth on the groove.
  • Press them into it with the thumb or forefinger. Picture 2;3
INSTALLATION OF THE MUSIC PLATE
  • Open the cover of battery box at the back of the toy tray.
  • Install 1,5V AA batteries ( Picture 6) with the correct polarity and then the toy tray can be operated.
  • Install the toy tray on the main tray while installing first the front edge ( Picture 4) and after rotate the fixators ,,3″ from the both sides. Or attach the music plate with clips under the tray (Picture 4.1) – Di pending of the model!
HEIGHT ADJUSTMENT

Rotate the button under the tray counterclockwise ,, 1″ (Picture 5) and push the front edge up ,,2″ to unlock. There are use instruction on the riser please, read them carefully.

OPTION SWING

Haul the two buttons up , which are on the same side of the bottom tray at the same time. ( Picture 7) Then turn the bottom tray perpendicular to the floor. Picture 8
To re-transform the cradle to the walker, pull it out simultaneously the two retainers on the left side and turn the arc in a horizontal position. Repeat the same with the right arc.
WARNING: The breaking of the retainers is due to incorrect operation and is not subject to warranty repairs!

BATTERIES SAFETY INFORMATION

The product needs alkaline batteries (not included in the set). To be assembled by an adult. Battery safety information
ATTENTION! In certain cases from the batteries may leak liquids, which may
cause chemical burning or may damage the product. To prevent leakage from the batteries:

  • Do not mix old and new batteries or batteries of a different type.

  • Place the batteries as shown inside the batteries compartment.

  • If the product will not be used fora longer time, remove the batteries. When batteries are depleted, remove them from the product.
    Discard safely the batteries, Do not throw batteries in a fire. Batteries may explode or leak.

  • Do not cause a short circuit in the batteries.

  • Use only identical batteries or batteries ofone type, according to the recommendations.

  • Do not recharge batteries, which are not rechargeable.
    Batteries contain substances that are harmful to the environment. Do not throw the batteries together with the ordinary household waste but deliver them to a specialized place for collecting batteries. Always remove the battery before disposal of the device or delivering it to an official waste collection point. IMPORTANT! After the end of the service life of the device, do not dispose of it together with the ordinary household waste but deliver it to an official collection point. Thus you will help with environmental protection.

  • Take out the batteries from the product before recharging.

  • If you use rechargeable batteries, the charging should be under adult control.

Protect the environment by not disposing of this product with household waste
(2012/19/EU).
Check the recommendations to local authorities about recycling (Only for Europe).

CUSTOMER SUPPORT

Didis LTD, Bulgaria
Shumen 9700, № 6 Trakia-iztok street
Тel.: +359 54 850 830
e-mail:[email protected]
e-mail:[email protected]

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

bertoni User Manuals

Related Manuals