ITC 86435 IllumaGrip Assist Handle Instruction Manual
- June 3, 2024
- ITC
Table of Contents
ITC 86435 IllumaGrip Assist Handle Instruction Manual
PARTS/TOOLS NEEDED:
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND
SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
-
Mark the install location for your handle. Pre-drill the wire access and mounting holes. To prevent damage to the wires install a wire grommet.
-
Wire the light based on the wiring diagram. Feed wires
back into the hole and use silicone sealant around the wires to prevent any ingress of water. For added protection use silicone around the end caps. -
Use #8 stainless steel flat head screws to mount the end caps.
3030 Corporate Grove Dr. Hudsonville, MI 49426
Phone: 616.396.1355 itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-
policy
DOC #: 710-00041 · Rev B · 07/27/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>