niko 552-00001 Home Control Wireless Smart Hub User Manual
- June 4, 2024
- niko
Table of Contents
Kickstarter manual
552-00001
Wireless smart hub for Niko Home Control
Packaging content
Radio specifications
Operating frequency …………………2.4 GHz, 868 MHz
Maximum radio frequency power ………………………… 2 dBm
Dimensions
Niko Home Control for traditional wiring ecosystem
Zigbee ® Certified products
-
552-00001: Wireless smart hub − recommended to install this device first
-
552-72101: Connected single switch, Zigbee®
-
552-72102: Connected double switch, Zigbee ®
-
170-33505: Connected switching socket outlet, Zigbee®
-
552-72301: Connected motor control, Zigbee®
-
552-72201: Connected dimmer, Zigbee®
-
552-80699: Smart plug, Zigbee®
-
552-80401: Wireless motion detector, Zigbee®
Easywave products
-
410-00001: Wireless switch with 2 buttons, Easywave
-
410-00002: Wireless switch with 4 buttons, Easywave
On your smartphone
-
Niko Home app
Continue reading
Scan the QR code for more information on how the products work and to explore examples of Niko Home Control on traditional wiring setups.
Minimum setup
Not included, to be bought separately
Links to more information Frequently asked questions (FAQ):
Scan the QR code to consult the website with frequently asked questions on Niko Home Control for traditional wiring.
Technical information and troubleshooting:
https://cdn.niko.eu/article/552-00001_en-GB_manualtechnical.pdf
Scan the QR code to consult the technical manual for the wireless smart hub for Niko Home Control.
Basic installation steps – Images − (written instructions on p. 3 and p. 4)
Continue reading
Scan the QR code for more detailed installation instructions, including programming instructions for the Niko Home app.
Before you get started
Hardware installation
Wireless smart hub registration
3
https://mynikohomecontrol.niko.eu
Niko Home app
Start using your installation
LED behaviour
Wi-Fi connection reset procedure
More information
This product can be installed in different ways. Scan the QR code on page 2 to open the online manual with more detailed installation instructions, including programming instructions for the app.
Before you get started
Prerequisites
You have a modern electrical installation. You have a home network with an
internet connection.
Before you get up and running, it is recommended to check the website page on
the Niko Home Control for the traditional wiring ecosystem. You can access
this page by scanning the QR code on page 1.
Difficulty level
Installation of the wireless smart hub is plug-and-play. It can be registered,
configured, and controlled using your smartphone.
Estimated duration
Between 10 and 20 minutes.
This product must be installed in accordance with national regulations.
Hardware installation
-
Connect the power plug to the smart hub using the micro-USB connector and plug the power adapter into a traditional (non-connected) socket outlet.
-
Connect the wireless smart hub to your internet network. Recommended: The most stable connection is achieved by using the included UTP cable. Once the smart hub is successfully connected the green LED on top of the smart hub turns on.
OR
Alternatively: If connecting a UTP cable is impossible, you can connect the wireless smart hub via Wi-Fi instead.
a) Connect your mobile device with the following Wi-Fi network:
• Network name: “Niko” followed by the last 4 characters of the wireless smart hub’s MAC address (XX:XX). You can find the MAC address (MAC) at the bottom of the
smart hub.
• Password: The wireless smart hub’s serial number (XXXXXXXXXX). You can find the serial number (SN) on the bottom of the smart hub.
b) Open a web browser on your mobile device. This will automatically open the web portal for this wireless smart hub.
c) Enter the password again (XXXXXXXXXX).
d) Select your internet network from the list of available networks and enter the password for this network, if required.
e) The wireless smart hub will now connect to your wireless internet network.
f) Switch back to your internet network on your mobile device if your device does not do so automatically.
Wireless smart hub registration -
Go to https://mynikohomecontrol.niko.eu and select the register tab.
-
Enter the smart hub’s full MAC address (XXXXXXXXXXXX) and serial number (XXXXXXXXXX), which can be found on the bottom of the smart hub. Follow the instructions on the website to finalize the registration of your wireless smart hub.
Niko Home app
-
Download and install the Niko Home app on your smartphone. Log in using the account details you entered during the registration and, if prompted, upgrade your Niko Home Control installation.
Start using your installation
Start using your Niko Home Control installation and install connected (Zigbee ® ) products that can be paired and programmed using the app. Check the online manual
and ecosystem to get inspired.
LED behaviour
LED off: There is no mains voltage or the smart hub or its power supply
is faulty.
Green LED flashing: The smart hub is connected to your home network but
has no internet connection.
Green LED continuously on : The smart hub is powered up and is connected
to the internet.
Red LED flashing: The smart hub is not connected to your home network. If
a network has already been configured, the smart hub will try to reconnect.
Red LED continuously on: The smart hub is malfunctioning.
Blue LED flashing: The smart hub is preparing for a reset.
Blue LED breathing: The smart hub is starting up or is upgrading.
Blue LED continuously on: The smart hub’s Wi-Fi connection is being
reset.
Wi-Fi connection reset procedure
a) Press and hold the surface of the wireless smart hub (which serves as a
button) for about 2 seconds. The blue LED starts flashing.
b) Press and hold the surface again for 2 seconds. The blue LED turns on
continuously.
c) Press and hold the surface for 10 seconds. The blue LED will count along by
flashing 10 times. The blue LED turns on continuously for 4 seconds and then
turns off.
d) Wait 3 minutes for the Wi-Fi connection to be reset.
Warnings regarding installation
The installation of products that will permanently be part of the electrical installation and which include dangerous voltages should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.
CE marking
This product complies with all of the relevant European guidelines and regulations. For radio equipment, Niko llc declares that the radio equipment in this manual conforms with the 2014/53/EU directive. The full text of the EU declaration of conformity is available at www.niko.eu under the product reference, if applicable.
Environment
This product and/or the batteries provided cannot be disposed of in the non- recyclable waste. Take your discarded product to a recognized collection point. Just like producers and importers, you too play an important role in the promotion of sorting, recycling, and reuse of discarded electrical and electronic equipment. To finance the rubbish collection and waste treatment, the government levies recycling charges in certain cases (included in the price of this product).
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
+32 3 778 90 80
support@niko.eu
www.niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct, and up-to-date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
PH552-00001R22171
Documents / Resources
| niko
552-00001 Home Control Wireless Smart
Hub
[pdf] User Manual
552-00001, Home Control Wireless Smart Hub, Wireless Smart Hub, Smart Hub,
552-00001, Hub
---|---
| niko
552-00001 Home Control Wireless Smart
Hub
[pdf] User Manual
552-00001 Home Control Wireless Smart Hub, 552-00001, Home Control Wireless
Smart Hub, Wireless Smart Hub, Smart Hub
References
- Confluence Mobile - Niko Guide
- Niko - home automation, switches, socket outlets and detector
- Niko - home automation, switches, socket outlets and detector
- Niko Home Control II programming software for Windows
- Niko Home Control II programming software for Mac
- Niko Home Control - Ecosystem
- DIY User Manuals
- Niko Home Control