thermaltake TOUGHLIQUID 240 ARGB Sync All-In-One Liquid Cooler Instruction Manual
- June 3, 2024
- thermaltake
Table of Contents
thermaltake TOUGHLIQUID 240 ARGB Sync All-In-One Liquid Cooler
Parts List
Intel Installation Guide
- 1700/1200/1156/1155/1151/1150
- 2066/2011-3/2011
AMD Installation Guide
- Tighten the screw to halfway.
- Tighten screw again to ensure your waterblock is secure enough.
Installation Guide
Intel
AMD
- A rotatable LED cap built-in waterblock accommodates re-orienting the logo no matter the direction the cooler is installed.
ARGB Controller Installation Guide
CAUTION: To use the ARGB Controller, please only connect Cable E to the water block.
- Light Mode
- Switch over between 7 LED modes.
- Rainbow → Full light → RGB Spectrum → Off → Flow → Radar → Pulse → Blink.
- Color Mode:
- When the light mode is in Full Lighted, Pulse and Blink :
* Switch over 8 LED colors.
* Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
2. When light mode is in Ripple :
* Switch over 7 LED colors .
* Red → Yellow → Green → Teal → Blue → White → Purple
3. When light mode is in RGB Spectrum:
* Click to memorize and lock the color you want, click again to unlock the 256 colors auto rotation.
4. When light mode is in Wave and Flow :
* LED color can not be adjusted.- Light Speed:
- Switch over between 4 light modes.
- Slow → Normal → Fast → Extreme
MB SYNC Installation Guide
CAUTION
- To use Motherboard RGB Software, please only connect Cable F to the water block
- Please power off the PC and check the Positive and Negative ends on the connector before connecting the cable to the mainboard. Connecting the wrong end can damage the product.
© 2021 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>