ITC 69307 Down Courtesy Light Installation Guide

June 3, 2024
ITC

Down Courtesy Light
Part#: 69307
INSTALLATION INSTRUCTIONS

PARTS NEEDED:

Safety Instructions

  • Disconnect power before installing, adding or changing any component.
  • To avoid a hazard to children, account for all parts and destroy all packing materials.
  • Light is rated for interior installation only, do not install in wet locations.
  • Operating Voltage: 10 – 14V DC
  1. Determine where your LED light fixture will be installed. Mark the location of the screw holes. Drill a hole for the wires and screws.

  2. Use the wiring diagram below to wire the light to the units power. Test the light
    |
    ---|---

  3. Feed the wires through the hole and screw the back nut onto the fixture. Snap bezel onto the light.

3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355 itc-us.com

For warranty information please visit www.itc-us.com/warranty-return- policy

Rev B · 04/07/20

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals