NEXTORCH UT31 Emergency Safety Warning Clip Light User Manual

June 3, 2024
NEXTORCH

NEXTORCH UT31 Emergency Safety Warning Clip Light User Manual

SPECIFICATIONS

ANSI / PLATO-FL1| High (White Light)| Low (White Light)| Red Light| Flash (Red Light)| Flash (Red and Blue Light)
---|---|---|---|---|---
Light Output| 220 lm| 28 lm| 4 lm| 4 lm| ―
Run Time| 6 h| 16 h| 21 h| 42 h| 80 h
Beam Distance| 53 m| 19 m| ―| ―| ―
Beam Intensity| 702 cd| 90 cd| ―| ―| ―
Impact Resistance| 1 m
Water Resistant| IPX4
Weight and Dimensions| Weight: 50 g / 1.76oz Size: 61 mm (Length) × 53 mm (Width) × 30 mm (Height)
Material| Light Source: White/ Red/Blue Light LEDs
ABS
Battery| Built-in 640 mAh Rechargeable Battery

Above tested specifications are strictly based on the standard of ANSI / PLATO-FL1.We tested UT31 with built-in 640 mAh rechargeable battery in 22 °C ± 3 °C. The specifications might be different when using a different battery or testing in a different environment.

FEATURES

  • Red and blue emergency flash.
  • LED infrared induction for hands-free operation.(Red and blue emergency flash is not included)
  • Type-C Rechargeable design, economical and convenient.
  • Equipped with LED battery indicator, easy to check the battery level.

INSTRUCTION

  • ON / OFF
    Press and hold the Normal Switch for 1 second.

  • Red and Blue Flash
    Press and hold the Normal Switch for 3 seconds.

  • Charge
    Charging time about 2 hours.

  • Mode Switch
    Press to switch modes when the light is on.

  • Inductive Operation
    Press the Inductive Switch and the blue LED indicator will be on.
    Waving your hand twice at the motion detector will turn the light on / off.
    Note: Red and blue emergency flash is not included.

MAINTENANCE

  1. Being infected with seawater or any corrosive chemicals, please rinse immediately with clean water.
  2. Please use high quality batteries; Remove batteries when not working for a long time, and then store in a cool dry place.
  3. Replace waterproof O-ring immediately when considering of the damage with use.

WARRANTY

  1. NEXTORCH warrants our products to be free from any defects in workmanship and/or materials for a period of 15-day from the date of purchase. We will replace it. NEXTORCH reserves the right to replace an obsolete product with a current production, like model.
  2. NEXTORCH warrants our products to be free of defect for 5 year of use. We will repair it.
  3. The warranty excludes other accessories, but rechargeable batteries are warranted for 1year from the date of purchase.
  4. In the event that any issue with a NEXTORCH product is not covered under this warranty, NEXTORCH can arrange to have the product repaired for a reasonable fee.
  5. You could access to NEXTORCH website (www.nextorch.com) to gain warranty service information by scanning the following QR code.You could also:
    Email us at service@nextorch.com
    Call us: 0086-400-8300-799
    OR contact your local dealer/distributor

CONTACT WITH NEXTORCH DESIGNER

In order to improve NEXTORCH , we appreciate you could offer our designers your after-use feedback and creative suggestions by scanning the following QR code. Thank you!

QR Code QR Code

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals