better Bathroomms BEBA-15603 Adjustable Height Bath Panel Installation Guide
- June 3, 2024
- better Bathroomms
Table of Contents
BEBA-15603 Adjustable Height Bath Panel
Installation Guide
BEBA-15603 Adjustable Height Bath Panel
Thank you for choosing a Better Bathrooms Product
Please read this user manual before installing and using this product Keep it
safe for future reference.
Visit our page www.betterbathrooms.com/ for
our entire range of Panels
INSTALLATION TOOLS
PANEL INSTALLATION
The bath should be set into position and adjusted to the required height and
levelled.
Take the sections of the bath panels and lay them down onto the flat surface
which is protected to prevent scratching.
Measure the height from the floor to the underside of the bath rim, this will
set the height of the panel.
Once the height is set, place the small section of the bath panel onto the
rear of the large section of the bath panel and adjust to the required height
of your bath.
When the correct height is achieved, secure the two sections together using a
suitable length woodscrew – not supplied (ensuring this is not too long that
it will exit the front of the large panel section)
A frame will then need to be built to secure the panel into position.
Place the panel to the bath and ensuring this is vertical, mark the floor at
the point where the back edge of the small section of the panel meets the
floor.
Next mark the front edge of the large panel where it meest the wall, remove
this, then measure the thickness of the panel and make another mark back from
the first, this will set the position of the batten to secure the panel.
Checking the floor for pipes and wires, secure a wooden batten (not supplied)
to the floor in line with the mark.
Checking the wall for pipes and wires, at each end of the bath secure a batten
to the wall, not all the way to the floor to accomodate the small section of
the panel.
If you are using an end panel, you will also require a corner post to be built to support the join between the end and front panel, some of this post may require notching out at the bottom to accomodate the small section section of the panel.
We recommend any cut sections of panel, joins, along the top edge where the panel meets the bath and along the bottom where the panel meets the floor are all sealed to prevent water ingress.
CLEANING AND MAINTENANCE
Wipe the product clean and dry regularly, especially when the product is
subject to steam or splashes.
Do not use harsh chemicals or materials on the product, as this will damage
the product and invalidate your guarantee.
To clean and maintain the product, wipe using a clean damp cloth and wipe dry
with a soft cloth.
UK SUPPORT
Call: 0871 244 0935
Office hours: 9AM – 5PM Monday to Friday
www.BetterBathrooms.com
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
20190926
Documents / Resources
|
better Bathroomms BEBA-15603 Adjustable Height Bath
Panel
[pdf] Installation Guide
BEBA-15603 Adjustable Height Bath Panel, BEBA-15603, Adjustable Height Bath
Panel, Height Bath Panel, Bath Panel, Panel
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>