Geek V87 Mechanical Keyboard User Manual
- May 15, 2024
- GEEK
Table of Contents
User Manual
KEY DESCRIPTION
| Strip Indicator : Displays multiple lighting effects and can be used to
check the battery status.
---|---
| CAPS Lock Indicator : On for uppercase, Off for lowercase.
| Scroll Lock Indicator: On for disabled Scroll function, Off for enabled
Scroll function.
| Windows Lock Indicator : On for Windows key locked, Off for normal use.
Win Key
Functions as the Option key in MAC mode.
ALT Key
Functions as the Command key in MAC mode.
Windows / MAC Mode
Switching to Mac mode while while Connected to a Windows System.
QUICK START
2.4GHz Wireless Connection(Tri-mode version)
- Remove the receiver from the night storage slot 0 inert the 24GHz receiver into a USB port on your computer
- Set the left mode switch to 24G mode
Bluetooth connection (Tri-mode version)
- Turn the mode switch on the left side to Bluetooth mode 9 Long press FN + number key 1 2,or 3to start pairing. During pairing, the strip indicator light will flash quickly. 0 You can pair up to 3 devices. Press FN + number key 1,2or 3to switch between devices
Wired Connection
- Insert the US8-C connection cable into the eyboard’s port. 9Connect the cable to your computer
- Flip the mode switch on the left side to the center
DOWER MANAGEMENT
(TRI-MODE VERSION)
Battery Status Check
To check the battery level, press FN+right CTRL. The battery percentage will be displayed on the strip indicator .
-
Battery level > 90%: 8 light beads light green from left to right.
Battery level=90% = 80%: 7 light beads turn green from left to right, and the remaining lights turn off. -
Battery level = 70%<80%: From left to right, 6 light beads light up in cyan, and the remaining lights turn off.
Battery level 2 60%<70%: 5 light beads turn cyan from left to right, and the remaining lights turn off. -
Battery level > 50%<60%: Four light beads from left to right light up orange, and the remaining lights turn off.
Battery level = 40%<50%: Three light beads from left to right light up orange, and the remaining lights turn off.
Battery level : Two light beads from left to right turn red, and the remaining lights turn off.
Battery level : The entire light bar flashes red, indicating low battery.
Low Battery Warning
- The Number keys will be flashing red When the battery is low.
Charging Method
In any mode, connecting the keyboard to a computer using the provided data
cable will charge the keyboard.
When connected via the data cable, you can check the charging status by
pressing FN+Right CTRL.
The green flowing light indicates it’s charging The green light means it’s
fully charged.
Sleep Mode
In Bluetooth and 2.4GHz modes, the keyboard enters the first level sleep
mode after 3 minutes of inactivity, and the backlight turns off.
After 10 minutes of inactivity, it enters the second level sleep mode, and
Bluetooth/2.4GHz disconnects. It can immediately reconnect by pressing any
key.
FN COMBINATION BUTTON
Multimedia Shortcut Combination Keys
Key| Windows System| MAC System| Comment
Fl| My Computer| Screen Brightness Decrease|
F2| Homepage Screen| Brightness Increase|
F3| Calculator| Console (CTRL+ Anow key up)|
F4| Open the media player| Search (WIN+F)|
F5| Previous Track| Call out SIRI|
F6| Next Track| Screenshot (win+ shift+4)|
F7| Pause/Flay| Previous Track|
F8| Stop| Pause/Play|
F9| Mute| Next Track|
F10| Volume Decrease| Mute|
Fl 1| Volume Increase| Volume Decrease|
F12| Email| Volume Increase|
ESC| Long press for 3 seconds to restore factory settings|
A| Switch to Windows mode|
S| Switch to MAC mode| Switch between WIN and ALT
Left WIN| Lock the WIN key| Win key lights up in white.
Right CTRL| Display charging light effect| It’s charging.
It’s fully charged.
1| Switch to Bluetooth Device 1(long-press to pair)| strip indicator light
flashing in blue .
2| Switch to Bluetooth Device 2(long-press to pair)| strip indicator light
flashing in purple.
3| Switch to Bluetooth Device 3(long-press to pair)| strip indicator light
flashing in cyan.
4| Long-press to pair with the 2.4GHZ receiver| strip indicator light flashing
in green.
Lighting Effect Settings
DEL| Turn on/off keyboard backlight
INS| Switch backlighting effects
←| Change backlight lighting direction
→| Adjust seven-color backlight
↑| Increase backlight brightness
↓| Decrease backlight brightness
=+| Increase backlight speed
-_| Decrease backlight speed
HOME| Switch strip indicator lighting effects
END| Switch strip indicator light color
PGUP| Increase strip indicator light brightness
PGDN| Decrease strip indicator light brightness
[{| Decrease strip indicator light speed
]}| Increase strip indicator light speed
FREQUENTLY ASKED QUESTIONS
Q: WHY IS MY WIN KEY NOT WORKING ?
A: When the WIN key is locked by pressing FN+WIN, it cannot be triggered for use, and the WIN indicator hight on the keyboard will be illuminated. To unlock it, press N+WIN again.
Q: When the WIN key is locked by pressing FN+WIN, it cannot be triggered for use, and the WIN indicator hight on the keyboard will be illuminated. To unlock it, press N+WIN again
A: After pressing FNS, the keyboard will switch to MAC mode. In this mode, on a Windows system, the WIN and ALT keys are swapped, andF1-F12become function keys. To switch back to Windows mode, press FN+A
Q: HOW CAN I CUSTOMIZE KEYS, USE KEYBOARD MACROS, AND MODIFY MORE RGB LIGHTING EFFECTS?
A: You can download the latest driver for HUB from the official website at wwwvgnlab.com/pages/vgn-hut Thi driver allows you to Customize keys,edit macros and modify RGB lighting effects within V HUB providing you with the full keyboard functionality experience.
DRIVER DOWNLOAD AND FIRMWARE UPGRADE
VISIT THE VGN OFFICIAL WEBSITE WWW.NVGNLAB.COM/PAGES/VGN-
HUB
TO DOWNLOAD THE LATEST DRIVER AND PERFORM FIRMWARE UPGRADES, EXPERIENCING THE FULL KEYBOARD FUNCTIONALITY.
LIGHTING DESCRIPTION
**Light effect switching
** Press FN+INS to activate custom backlighting, supporting only one set of custom memory lighting.
Custom Lighting Editing
After pressing FN+~ to activate custom backlighting, press FN+~ again to start
editing the lighting.
At this point, the next key to be defined changes the light color with each
press of the keyboard.
After editing, press FN+~ again to save the edited lighting.
Strip Indicator Lighting Effects
Wired mode
Press FNt+right CTRL to display the charging light effect
Green light flowing It’s charging
Lighting green steady It’s fully charged.
Wireless mode
When the device is not connected, the strip indicator preferentially indicates
the wireless channel
After device connection,press FN+right CTRL to display the charging light
effect
Green light flowing It’s charging
Lighting green steady It’s fully charged.
When the device is pairing, the strip indicator flashes quickly. During
reconnection, the long strip
indicator flashes slowly (2.4GHz in green BT1in blue BT2 in purple in cyan
).
After a successful pairing, the normal lighting effects will be restored.
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>