Bateria Power 10A MPPT Sunrock10 Solar Charge Controller User Manual

**Bateria Power 10A MPPT Sunrock10 Solar Charge Controller User Manual

**

Bateria Power is committed to becoming a leading technical company in the clean energy industry, the company has been deeply engaged in the photovoltaic/battery/charging industry for many years, hoping that our products and technologies allow users to feel the fun of using new energy. and at the same time contribute to the carbon reduction of the earth.

We look forward to direct communication with users, if you have any problems or unpleasantness during use, please feel free to contact us, your comments will be accepted without any reserva- tion, and for our future product improvement. thank you!

Packing List

• MPPT Solar Charge Controller x1
  

• SAE Cable x1

• Screws x4

• User Manual x1

Product Overview

Controller

Accessories

Product Description

Product Description The product designed for charging from solar to battery, this mppt solar charge controller with very high charging efficiency, and easy to be operated, which can ensure you a good operation experience, and enjoy the fun of clean energy.

Main Feature

• 10A/20A MPPT solar charge controller with portable design.
• 3-stage charging optimizes battery performance.
• Suitable for battery types such as vented GEL, AGM and LiFePO4.
• LCD shows battery voltage and charge current, etc.
• LED indicates battery soc charging status and battery type.
• User friendly key press operation, simpler and easier.
• Easy to be installed.
• Overcharge, over-temperature, reverse polarity protection.

Specification

24V/12mA
System Voltage Battery Type| 12V AGM/GEL AUTO:| 12V/24VLi FePO4(manual)
Max Solar Input Voltage| <30Voc| 12V Bat/3OVoc 24V Bat/60Voc
Rated Solar Charge Current| 10A| 20A
Max Solar Input Power| 150W| 300W/12V Bat 600W/24V Bat
Operating Temperature| -20°C-4-45°C
Internal Protection Temperature| -40°C-+80°C
IP Protection| IP45
Net Weight| 137g| I          350g
Operating Altitude| <3000 meters
Controller Dimension(mm)| 109.551726| 15079.355

Installation Guide

Note:

First to connect the battery then connect PV panel.

Product Instruction

LCD Display Indication

Men 1: BAT Volt & Charge Curr
Menu 2: Device Temp
Menu 3: ERROR
Menu 4: System Volt and BAT Type (Only LFP and Sunrock 20M) 12v TypeFP Menu

Battery SOC Indication

This SOC s for user reference for 24V system: each data 2.

Float Fashing
steady on

Key Operation

| View Mode (LCD only)| Long Press| Enter Set Mode
Short Press| Screen Page Switch
Set Mode
(Battery LED only| Long Press| Enter Next Set Item or Exit Set Mode And Save
Short Press| Edit Parameter

Battery Type Setting

Note:
System Voltage (Sunrock 20M And LiFePO.)
Lead-acid batteries are selected according to the signal, generally do not need to be set, lithium batteries need to be set as follows.
First, long press the button 3s, the battery type indicator will flash, Then short press to enter the next battery type, when reach to the LiFePO, battery. long press the button for 3s, at this time the display screen will show a battery voltage LFP12, if you want to set 24V, short press the button, it will switch to LFP24, then long press the button 3s to save parameters.

Charger Step For Different Battery

Equalize ChargeVoltage| GEL|
---|---|---
AGM| 14.6V
LiFePO|
Boost Charge Volt| GEL| 14.4V
AGM| 14.4V
LiFePO| 13.8V
Float Charge Volt| GEL| 13.8V
AGM| 13.8V
LiFePO|

Warning and Caution

• Solar Panel: recommend 18V for 12V system, and 36V(single 36V panel or2 units 18V panel in series) for 24V system. Please do not arbitrarily use in series. Do not exceed PV Voc.
• The PV Voc cannot exceed 30V for 12V system and B0V for 24V system. Otherwise the product may be damaged
• Charging start condition: PV voltage is 3V higher than battery voltage. PV minimum charging voltage is higher than 15V for 12V system, 27V for 24V system, battery voltage is higher than 3V.
• The products should be used within rated power and voltage range.
• Avoid placing solar panels in partially sunny or shaded environments.
• Keep controller away from water.
• Avoid direct sunlight
• Keep good heat dissipation

Error Code

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>