TORK 3.0 Sensor Communication Unit Installation Guide
- June 16, 2024
- TORK
Table of Contents
TORK 3.0 Sensor Communication Unit
Specifications
- Product Name: Sensor Communication Unit 3.0
- Model: 2a
- Dimensions: 2x x5
- Colour: Twin
- Components: 1x 2c Combination Cabinet, 2x T8
- Battery: 1 x CR3032
- Manufactured by: Essity
- Origin: Made in Sweden
- Version: A
Sensor Communication Unit 3.0
Replace battery
Installation
- Open the 2c Combination Cabinet.
- Insert the Sensor Communication Unit 3.0 into the cabinet.
- Secure the unit in place and close the cabinet.
Battery Replacement
- Locate the battery compartment on the Sensor Communication Unit 3.0.
- Remove the old CR3032 battery.
- Insert a new CR3032 battery in the correct orientation.
- Close the battery compartment securely.
Usage
To activate the Sensor Communication Unit 3.0, press the designated button or switch as indicated on the unit.
FAQs
Q: How do I know when to replace the battery?
A: The unit will display a low battery indicator or may fail to function
properly when the battery needs replacement.
Q: Can I use rechargeable batteries with this unit?
A: It is recommended to use a CR3032 disposable battery for optimal
performance.
Q: How can I contact customer support for further assistance?
A: For UK inquiries, contact Essity
UK Limited at +44 1582
677400. For North America, reach out to Essity HMS North America Inc. at 2929
Arch Street Suite 2600 Philadelphia, PA 19104.
Manufactured by Essity Hygiene and Health AB
SE-405 03 Göteborg, Sweden
Visiting address: Mölndals Bro 2, Mölndal
UK
Essity UK Limited
South Elds Road, Dunstable, Bedfordshire, LU6 3EJ, UK
+44 1582 677400
North America
Distributed by Essity HMS North America Inc
2929 Arch Street
Suite 2600
Philadelphia, PA 19104
www.essity.com,
www.torkglobal.com
Made in Sweden