infanti VB603 Digital Baby Monitor User Manual
- June 3, 2024
- infanti
Table of Contents
infanti VB603 Digital Baby Monitor
WELCOME..
to your new digital Baby Monitort Thank you for purchasing the product. Now
you can see and hear your baby sleeping in the other room or you can monitor
your older children in their playroom. This User’s Gulde provides you with all
the infomation you need to get the most from your product. Before you can use
the baby monitor, we recommend you insert and fully charge the battery in the
parent unit, so that it cotinues to work if you disconnect it from the mains
power to cary lit to another location. Please read the Safety Instructions on
page 6 before you install the units.
Got everything?
- 1x Parent Unit
- 1x Baby Unit
- 2x Power adapter
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received, including interference
that may cause undesired operation;
This equipment complies with FCC radiation exposure limits setforth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body.
Overview of your baby monitor
Parent unit:
- Power Switch
- Power Adapter Port
- LCD Screen
- Microphone
- Charging Indicator
- Power/Signal Indicator
- VOX Key
- Music Player ON/OFF Key
- PTT Key
- Speaker
- 0K/Menu Key
- Return Key
- Volume +/Up
- Volume – / Down
Baby unit:
- Light Sensor
- Camera Lens
- Power Indicator
- Microphone
- Infrared LED
- Power Switch
- Power Adapter Port
- Temperature Sensor
- Pair key
- Speaker
Safety Instructions
WARNING
This baby monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User’s Guide,
safe to use. Therefore, always read the instructions in this User’s Guide
carefully before using the device. Adult assembly is required. Keep small
parts away from children when assembling.
This product is not a toy. Do not allow children to play with it
This baby monitor is not a substitute for responsible adult supervision.
Do not place the baby unit or cables in thee cot or within am’s reach of the
baby (at least 1 meter away).
Keep the cords out of reach of children. Do not use the baby monitor near
water or a heat source
Only use the power adapters provided. Do not touch the plug contacts with
sharp or metal objects.
Getting started
Baby unit power supply
-
Connect the small plug of the power adapter to the baby unit and the other end to the mains socket.
NOTE: Only use the power adapter provlded -
A blue light led will display indicate the baby unit is working
Parent unit power supply
Charging the parent unit fully before use Is recommended.
This will allow the unit to operate on battery in the event of a power
failure.
-
Connect the plug of the power adapter to the parent unit and the other end to the mains socket
NOTE: Only use the power adapter provided -
The charging LED will iluminates means start charging the battery
-
Push the power key to ON side to tum on the parent unit
Using the Baby Monitor
Setting up
Place the baby unit in a convenlent location (e.g. on a table) and point the
camera lens towards the area you want to monitor. Adjust the baby unit until
you are satisfied with the image in the parent uniít.
NOTE
Do not place the baby unit within baby’s reachl f there Is Interference on the
plcture or sound, try moving thee units to diforent locations, and ensure they
are not close to other electrlcal equlpment
Pairing camera
The encdosed baby unit has already been registered, You do not need to
register it again unless the baby unit loses its link with the parent unit.
See section “5.2 Camera Registration” for more details.
VOX Function
Press VOX key will turm on VOX mode, The Vox mode automatically puts the
display in sleep mode to save battery. t reactivates automatically, when it
detects noise in the baby’s room.
music player
Press music key will tum on the music player and play lullaby through the baby
unit; press music key agaln will turn off it.
Talk function
Press and hold PTT key on the parent unit to talk to your baby through the
baby unit loudspeaker. The symbol wil be displayed at the bottom of the
screen.
Adjusting the volume
When the video is playing mode, press Volume- key to decrease volume or
Volume+ key to increase volume. The display will show the curent volume for 3
seconds.
Monitoring Screen Icons
- Signal strength indicator
- Temperature of the baby’s room
- Lullaby is playing
- Vox function activated
- Alam activated
- Battery indicator
- PTT function activated
- Date and time (HH:MM AM/PM DD/MM)
Menu Options
Main menu
Press “OKlMenu” key at monitoring screen will enter the main menu, t contains 6 items
- Camera
- Alam
- Settings
- VOX
- Languages
- System info
You can press the “Up” key or “Down key to move the cursor to select an item and press “Menu” key will enter the sub-menu which you selected. Press “Retum” key wll back to montoring screen
Camera Registration
Press “OK/Menu’ key to entry registering screen, then push the pair key on the
back of baby unit within 10 seconds.
Alarm
Press ‘PTT key to move the cursor and “Up/Down key to change value.
Settings
TIme and date
There are contains 2 items in this menu
Set time/date
Set format
Press PTT key to move the cursor and “Up/Down key to change value.
Temperature unit
Switch the unit to Celsius or Fahrenhelit
Anti-llcker
You are able to adjust the frequency of 50/ 60 HZ to suit your lighting for
anti-flicker
LCD backllght
You are be able to adjust the brightness of the LCD you are viewing and the
LCD backlight active time in menu operation.
TECHNICAL FEATURES
- Frequency: 24 GHz Digital
- Modulation Mode: GFSK
- Operating taemperature :-10 to +45C
- Operating Humidity: <85%
- Range: 260m in open field
Monitor
- LCD: 3.2 TFT LCD
- Resolution: 320X240@20tps
- Battery: L-Polymer 750mAh
- Dimensions (Wx Hx D): 120mm x 70mm x 17mm
camera
- Sensor: 0.3Mega pix CMos
- Minimum Ilumination: OLux (IR on)
- Night Vision Distance: 15t (5m)
- Lighting sensor
- Temperature sensor
- Dimensions (WxHxD): 67mm x 106mm x 67mm
Manufacturer: Shenzhen Feelstorm Technology Co., Ltd Manufacturer Address: Floor 5, Building C, Huawan Industrial Park, No.119, Bao’an Blvd, Bao’an District, Shenzhen, China
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1 This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device. The term IC before the
certification/registration number only signifies that the lndusthy Canada
technical speciications were met. Ihis product meets the applicable Industry
Canada technical specifications.
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed andd Operated
wItn minimum distance 20cm berween the radiator & your body.
SAR Information Statement
Your Video Baby Monitor is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Innovation, Science and EConomic Development
Canada of the Canada Govemment. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientiic studies. Ihe standards include a Substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for Video Baby Monitor employs a unit of measurement
known as the Specfic Absorption Rate, or SAR. The SAR limit set by the ISED is
1.6 Wikg. ‘Tests for SAR are conducted with the Video Baby Monitor transmiting
at its highest certified power level in all ested frequency bands. Although
the SAR is determined at the highest certified power level, the actual SAR
level of the Video Baby Monitor while operating can be well below the maximum
value. This is because the Video Baby Monitor is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output. Before a Video Baby Monitor is available for sale
to the public, it must be tested and certified to the ISED that it does not
exceed th limit established by the govenment adopted requirement for safe
exposure The tests are performed in positions and locations (eg., at the ear
and won on the body) as required by the ISED for each model. The highest SAR
value for this Video Baby Monitor when tested SAR value is 0.08 W/Kg (Body-
worn measurements differ among Video Baby Monitor, depending upon available
accessories and ISED requirements). While there may be differences between the
SAR levels of various Video Baby Monitor and at various positions, they all
meet the government requirement for safe exposure. The ISED has granted an
Equipment Authorization for this Vided Baby Monitor with all reported SAR
levels evaluated as in compliance with the ISED RF exposure guidelines. SAR
information on this Video Baby Monitor is on file with the FCC and can be
found under the Display Grant section of https://sms-sgs.ic.gc.cal after
searching on IC: 29356-BM90701 Additional information on Specific Absorption
Rates (SAR) can be found on the Cllular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com. ” In the United
States and Canada, the SAR limit for Video Baby Monitor used by the publi is
1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give additional protection for
the public and to account for any variations in measurements. The SAR test
distance is Omm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>