LED s light 1000562 LED Solar Outdoor Wall Fixture with Motion Detector User Manual
- June 3, 2024
- LED s light
Table of Contents
LED s light 1000562 LED Solar Outdoor Wall Fixture with Motion Detector
Dimension
Installation Instruction
Specification
Art . Nr .
| 1000562
---|---
Power| SW/ 4□□lm
Light Colour| 27-K[Warm]
LED’s| sm-2835×4
Battery| Type: 1865- Li-Ion 2.2 mRh/3,7V-8,14Wh
Modes|
Detection angle| 12″/ 6-8m
Illumination area| 6-7m
Degree of protection| I P44
Lifetime| 30.000 Hours
**** Box Contents| 1x solar lamp
1x accessory bag
1x Manual
Notes on Disposal
The product is designated for separate collection at an appropriate collection
point. Do not dispose of the product with household waste. For more
information, contact the retailer or the local authority responsible for waste
management.
Care
Before cleaning the unit, disconnect it, if necessary from other components; do not use aggressive cleaning agents.
Warranty
The unit has been carefully checked for defects. If nevertheless, you do have cause for complaint, please go back to the retailer where you bought the product together with your proof of purchase.
Safety
General advice
- Read the manual carefully before use. Keep this manual for future reference.
- Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.
- Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
- This product Must not be used in the immediate vicinity of children without the supervision of an adult. Children must not be allowed to play with the device.
- Do not modify the product in any way.
- Do not expose the product to water or moisture. (IP 20)
- Do not immerse the product in water. (IP 44 – IP 66)
- Keep the product away from heat sources.
- Do not block the ventilation openings.
- Do not look directly into the light source of the led lamp.
- Keep a minimum distance of >2 meters between the lamp and the surface being illuminated.
Electrical safety
● To reduce risk of electric shock, this product should only be opened by an
authorized technician when service is required.
● Do not use the product if the cable or plug is damaged or defective. When
damaged or defective, it must be replaced by the manufacturer or an authorised
repair agent.
● Before use, always make sure that the voltage is the same as the voltage on
the rating plate of the device.
● Make sure that the cable does not hang over the edge of a worktop and cannot
be caught accidentally or tripped over
Warning
● The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similarly qualified person.
● Caution, risk of electric shock.
● The external flexible cable or cord of this luminaire cannot be replaced; if
the cord is damaged, the luminaire has to be destroyed.
Disclaimer
We reserve the right to make technical modifications. without notice. All logos, brands and product names are trademarks or registered trademarks or their respective holders and are hereby recognized as such. We are not liable for damage arising from incorrect handling, improper use or wear or tear. Please visit us online For more information about our company and our products,
Documentation
The product has been manufactured and supplied in compliance with all relevant
regulations and directives, valid for all member states of the European Union.
The product complies with all applicable specifications and regulations in the
country of sale. Formal documentation is available upon request. The formal
documentation includes, but is not limited to the Declaration of Conformity,
the Material Safety Data Sheet, and the product test report.
CE declaration
This product complies with the following directives:
- LVD: 2014/35/EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) can be found here.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>