audiocodes RXV200 MTR for Android Room Compute User Guide
- October 30, 2023
- AudioCodes
Table of Contents
audiocodes RXV200 MTR for Android Room Compute
Physical Description
The figure below shows the RXV200 MTR for Android™ Room Compute.
Checklist: Shipped Items
Make sure you received the following items shipped in the box:
- Power cable / adapter
- HDMI In/Out cables
- Two USB Type A cables
- USB Type C cable
- Ethernet cable
Bundles
Two bundles are available. Make sure you received the correct bundle per your order.
Bundle Name| Details|
---|---|---
RXV200-B20| § Small room up to 10 users
§ RXVCam50M (4K Camera, x10 digital zoom, Auto Framing, 100⁰ field of view)
§ RX15 (2.5m pick-up)
| 
RXV200-B40| § Large room up to 16 users
§ RXVCam50M (4K Camera, x10 digital zoom, Auto Framing, 100⁰ field of view)
§ RX40 (6m pickup with 2 satellite mics)
| 
Cabling
The figure below shows the device’s rear panel connectors.
Powering up
Press the power button on the front of the device.
Management
The RXV200 is fully managed by AudioCodes’ One Voice Operations Center Device
Manager ).
Management includes:
- Firmware management / upgrade
- Alarm management
- Upgrade the MTR APK
Pairing
RXV200 must be paired with the AudioCodes RX-PAD Meeting Room Controller.
See the RX-PAD Meeting Room Controller Pairing Guide for more information.
Specifications
RXV200 supports:
- multiple cameras
- any sort of audio
- advanced AI
Following are the supported features:
| Feature | Specification |
|---|---|
| Camera inputs | 2 X 4K simultaneous camera inputs |
| Content camera | 1 content camera input (USB based) |
| HDMI outputs | 2 X HDMI1.4 output to external screens |
| HDMI input types | HDMI 2.0 Ingest (including audio) |
| Device interfaces | Proximity join and casting via Bluetooth |
| Wi-Fi type | Dual band Wi-Fi |
| USB port types | One USBC connector and two USBA connectors for audio |
peripherals
Android version| Android 10 (Android 13 in H2/2023)
Chipset type| Latest chipset from QUALCOMM for video/conf applications
International Headquarters
1 Hayarden Street,
Airport City
Lod 7019900, Israel
Tel: +972-3-976-4000
Fax: +972-3-976-4040
AudioCodes Inc.
80 Kingsbridge Rd
Piscataway, NJ 08854, USA
Tel: +1-732-469-0880
Fax: +1-732-469-2298
Contact us : https://www.audiocodes.com/corporate/offices-worldwide
Website : https://www.audiocodes.com/
©2023 AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP
Sounds Better, IPmedia, Mediant, MediaPack, What’s Inside Matters, OSN,
SmartTAP, User Management Pack, VMAS, VoIPerfect, VoIPerfectHD, Your Gateway
To VoIP, 3GX, VocaNom, AudioCodes One Voice, AudioCodes Meeting Insights and
AudioCodes Room Experience are trademarks or registered trademarks of
AudioCodes Limited. All other products or trademarks are
property of their respective owners. Product specifications are subject to
change without notice.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
IMPORTANT NOTE: FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body. This transmitter and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice Information
Information contained in this document is believed to be accurate and
reliable at the time of printing.
However, due to ongoing product improvements and revisions, AudioCodes cannot
guarantee accuracy of printed material after the Date Published nor can it
accept responsibility for errors or omissions.
Updates to this document can be downloaded from
https://www.audiocodes.com/library/technicaldocuments
This document is subject to change without notice.
Date Published: Apr-25-2023
Document #: LTRT-18280